Welcome, Guest. Please login or register.
November 23, 2024, 12:18:20 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally 5500 board issues... Eprom issues? 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 5500 board issues... Eprom issues?  (Read 2126 times)
AffordableSlots
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 30
Offline Offline

Gender: Male
Posts: 150



WWW
« on: November 09, 2010, 12:27:12 AM »
 Help I have 12 Bally 5500 slots and I have issues I cant figure out on a few of them, any help with any of these issues would be great....

One of my machines has no sound, I have checked the speakers and tried the mpu board in various machines.... still no sound. Does anyone know what chip controls the sound? I have parts boards and could swap the chips, I just don't know where to start. I have swapped a few chips with no luck. Scratch Head

I Have another machine that always gives me a 54 code. I have made sure all the door switches are closed, no luck. This particular machine LOOKS like the drop door wires run to a plug near the bill acceptor area. The plug has 6 wires on it, and there is no place to plug it in. So it seems there are no wires that run to the back plane board. I have compared wiring from my other machines and it seems there are 3 wires missing on the plug that plugs into the back plane board. I need to somehow complete the circuit to get rid of the 54 error code. Does anyone have any ideas or a wiring diagram? Help

Last but not least... I have a machine that gives me no display, and the board reset red led just blinks when powered on. I have put other boards in this machine and they work fine... But I have 4 spare boards I have that I am trying to make a good one out of. Does anyone have A chip description for the bally 5500 mpu boards?  I need to know what chip does what... A bally 5500 manual would be great, I cant find mine... the only ones I have found don't have the wiring diagram or mpu board chip settings etc.


Help from anyone would be appreciated. propeller
« Last Edit: November 12, 2010, 02:12:36 AM by tellmeaboutit » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.097 seconds with 19 queries.