I need help on coin comparitor wireing and where I can find a manual for my slot

[Slot Dummy]

I need hlep with the two wires coming off the harness on the door (orange and black) that go into the coin comparitor (CC-16 12VDC). I am missing the plastic connector at the coin comparitor and I need to know which location the orange and black wires go should I find a connector. It looks like the coin comparitor connection is 6 lugs and it connects to the two wires and then it connects to a white plastic connection on the door.

I would like to find a manual for the machine if anyone knows where I can get one. The label on the side shows Sigma Inc - Mech 3 Reel - WD model W3113.

Any help you can give me would be appreciated.

[jay]

Can you perhaps snap a pick of the inside of your door, pls include the coin comparitor.
You can post 2 pics to each reply so feel free to make multiple replies.

I hate to tell you but Sigma's were sometimes/often the bastard love child(s) of the slot industry.

Many of the Sigmas are comprised of IGT, Bally and other parts.
Sigma often/occasionally purchased older machines as trade ins, then used the cabinets and parts and issued new creations.

I am sure many on this forum can help you but to find an exact manual for that slot may be a stretch.

Also can you describe the coin behavior. Is it accepting coins as credits ??

or are the coins just falling through to the coin tray or hopper ??

[FORDSBS]

I need hlep with the two wires coming off the harness on the door (orange and black) that go into the coin comparitor (CC-16 12VDC). I am missing the plastic connector at the coin comparitor and I need to know which location the orange and black wires go should I find a connector. It looks like the coin comparitor connection is 6 lugs and it connects to the two wires and then it connects to a white plastic connection on the door.

I would like to find a manual for the machine if anyone knows where I can get one. The label on the side shows Sigma Inc - Mech 3 Reel - WD model W3113.

Any help you can give me would be appreciated.

Here is the site for Rudys. They have free downloads for manual & more.
http://rudysdeals.com/index.php?route=product/category&path=72&page=2
Ford

[Slot Dummy]

Thanks for the manual link, I will check it out.  Late last night I found a source on line for the plastic connector and wire pins for the comparitor connection. I will let you know if they work. I believe that the orange wire is 12vDC and goes to position 5 on the connector and the black wire is the ground and goes to position 6. I have attached 2 pcitures as suggested. Thanks for everyones help on this.