* Code 21 - how do i fit that ?

[Westfieldslots]

I HAVE A "LUCKY 7" SQUARE TOP SLOT MACHINE , SHOWING CODE 21 - I HAVE DONE ALL I CAN THINK OF, I'VE PUT
THE CLEAR CHIP IN RESET IT , PUT THE ORIGINAL CHIP BACK IN IT WENT THOUGH THE STEP AND STILL I GET THIS ERROR 21 *

ANY IDEA , WOULD BE GREAT

[knagl]

Welcome to NLG, Westfield Slots.

21 is a coin-in error.  Does the machine have coin-in parts (specifically, the coin optics) and are they known to be good?  Have you tried swapping in a known working coin-in assembly to try and isolate the problem?  How about a different, known working MPU board?

A clear chip on the S+ is a last resort and generally shouldn't be used, but since you did use it, did it cycle through the numbers on the display like it should have when it was clearing, or was it just frozen with the error 21?

Your profile indicates that you own a slot repair shop -- how much experience do you have in S+ repair?  I ask so we can determine what level of troubleshooting we need to provide to you.

Was this machine working and then something caused the error, or did you receive the machine in the condition it's in now?  The more you can tell us (including specifically what all you've tried (versus "I HAVE DONE ALL I CAN THINK OF"), so we don't suggest something you've already tried), the more we can tell you about how to fix your machine.  

[Westfieldslots]

how much experience do you have in S+ repair?  " very little "

i change out the coin opit * same code...
swap motherboards * same code
run the clear chips and all the step * same code

i have no clue ,whats causing it

when i was clearing it went ok thou the step
then at last suppose to spin ,but it doesn't goes from 20 on credits to 21 on winning paid
and stay there you cant do anything ,
its weird

[knagl]

To be clear on terminology on the S+ machines, the motherboard is the fixed board on the bottom of the machine that you typically wouldn't remove.  The MPU (Main Processor Unit) board is the removable board that holds the SP and SS chips, and is mounted in a removable metal tray with a black knob on it.

Check the wiring and the connectors that go between the coin-in assembly and the machine.  If there is a broken wire there, that could also cause the coin-in error.

Also, this:

Was this machine working and then something caused the error, or did you receive the machine in the condition it's in now?

[Westfieldslots]

receive the machine in the condition it's in now? yes .... i got it like this hoping it would be a Easy fix

Thanks for the idea's & help ... i'll go and check the wiring

[JOE5981]

talking about code 21 , i have a igt slat top  that i bought with no coin comparitor in it ,it has a code 21 showing  in window. can anyone tell me what coin comparitor goes in it ( numbers , volts and any other info i can use to get one )

thanks for your help

[Tilt]

cc-16 24V.  Probably any of the vendors at the top of the page can supply you with one.

[knagl]

Keep in mind that the comparator isn't going to cause or resolve a coin-in error (21) on an S+ -- your problem is with the optics, which are located below the coin comparator.

[JOE5981]

 :3-thank you i will get optics unit  and comparator, and see what i get.

[Buzz]

:3-thank you i will get optics unit  and comparator, and see what i get.

http://newlifegames.net/nlg/index.php?topic=10818.0

Joe Take a look at this thread. 

[JOE5981]

i did the # 33  test and my diverter does work, where do i go from here ? thanks for the info

[StatFreak]

Joe, I deleted your duplicate post in the other thread to avoid having multiple discussions about the same problem running parallel to one another.


StatFreak
  Global Moderator

[Buzz]

Joe  I put up the wrong link, try this one.  http://newlifegames.net/nlg/index.php?topic=10774.0