Welcome, Guest. Please login or register.
November 21, 2024, 06:22:13 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  WMS Reel Games. (Moderator: knagl)
| | |-+  I/O Boards		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: I/O Boards  (Read 4300 times)
pyrohobie
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 22
Offline Offline

Posts: 55
« on: November 26, 2010, 02:27:51 PM »
Ok- I'll keep this in a lone topic.

I just got my 2 I/O boards in. When I put 1 into a slot machine- It starts spitting quarters out- even if I have a clear chip in. It doesn't matter which machine I put it in(PIG, Jackpot)

Any idea's

Doug
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #1 on: November 26, 2010, 02:38:46 PM »
I don't know a thing about your machine but I'd post the I/O board numbers so someone
could double check to see if they're the right ones for your machine?
Perhaps a good CLEAR hi-resolution photograph of them would help?
Logged
pyrohobie
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 22
Offline Offline

Posts: 55
« Reply #2 on: November 26, 2010, 02:47:06 PM »
The part number is 5779-13912-03-

It matches the same one that came out of the machines
Logged
tollguy316
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 489
« Reply #3 on: November 26, 2010, 05:05:37 PM »
 Scratch Head Scratch Head Scratch Head   Odd...    Is anything flashing on the lcd screen while it is paying credits ?  (ie; counting down the credits as it pays out quarters? )
« Last Edit: November 26, 2010, 06:35:31 PM by tollguy316 » Logged
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« Reply #4 on: November 26, 2010, 05:11:21 PM »
The transistor that controls the hopper is shorted. It's not holding credits, the I/O board has no "Smarts"......


Kirk
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
dale
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 60
Offline Offline

Gender: Male
Posts: 362
« Reply #5 on: November 26, 2010, 05:40:32 PM »
This is the same problem my brother and I had with a Jackpot Stampede Deluxe. We took it to Kirk who tested our chips and located a bad chip in the middle of the board. It was the large square one. Kirk suggested we replace the board and the problem was solved. Our problem started out as the hopper just spitting out coins. But of course we made it worse as we struggled a full day on changing out parts. Kirk identified our problem in less then half an hour. Haven't had a problem since and gained a lot of experience working on the Williams 400.
Logged
pyrohobie
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 22
Offline Offline

Posts: 55
« Reply #6 on: November 26, 2010, 06:57:45 PM »
So-

I bought these boards on line- the one is probally bad huh?
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: November 26, 2010, 07:26:32 PM »
Actually, those I/O may be in excellent shape - your problem could lay somewhere else.
What were your reasons for buying another set of I/O boards in the first place?
Logged
pyrohobie
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 22
Offline Offline

Posts: 55
« Reply #8 on: November 26, 2010, 07:33:48 PM »
The one board that failed when you turned the machine on-ALL the lights came on-and I mean all- The second board we had power supply troubles and we think I sent double power through the ATX and a different power supply, Check out another topic that I posted earlier.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.08 seconds with 19 queries.