aristocrat mk4 manual hopper and tech advice needed

[firefly_rfs]

Hi, im new to slots and to this site im after quite a few things actually and am hoping someone might be able to help me, i have an aristocrat mk IV 'tequila sunrise' video machine whick is , at present just a large peice of metal sitting on my floor.. i am after a few things for it, firstly, a coin hopper - secondly - a manual for this machine with pictures and wiring diagrams...lol probably asking a bit much there, and more than likley a monitor.. can any one help pleas.. here are some pics

[firefly_rfs]

oh yes im from n.s.w. australia - at niagara park near gosford

[TZtech]

Hi and Welcome to NLG.

What is the machine doing / not doing ?. It looks like your power supply is ok as all three LEDS are lit up. Does it make any kind of noise / do button bulbs come on when you start it up ?
Most probably fitted with a ceronix monitor. These are normally pretty reliable. Can see it on your picture but apart from the signal cable going from the CRT to the processor board there should also be a power cable coming from the CRT and plugged into the power supply.

Ian

[dougskenya]

TO ALL
 
HOPE THIS IS THE RIGHT INDEX......GUYS,,cos am still familialising with NLG.
Am kindly seeking for advice Regarding an ARISTOCRAT MKV,Game=CLEOPATRA we bought previously....How can i install a KEY ON/OFF system on the machines?
Apparently the information i have is that the game software does not support the OPTION......Can there be an upgraded cleopatra version anywhere?
HELP HELP HELP PLS

DOUGS=KENYA

[TZtech]

Hello Dougs

Halway there - In the right index but you need to create a New Topic for requests.
What base SW do you currently have. The africa base SW supports Key on/Key off functionality. You will also need to add some additiona wiring and a keyswitch.

Ian

[firefly_rfs]

Hi and Welcome to NLG.

What is the machine doing / not doing ?. It looks like your power supply is ok as all three LEDS are lit up. Does it make any kind of noise / do button bulbs come on when you start it up ?
Most probably fitted with a ceronix monitor. These are normally pretty reliable. Can see it on your picture but apart from the signal cable going from the CRT to the processor board there should also be a power cable coming from the CRT and plugged into the power supply.

Ian

g'day Ian,

well ill try and cover everything, there are two red lights that come on on the game board itself(the third light that is not on is the 'external battery' light, when the machine is turned on at the power board, the flouro's come on and all the buttons light up except for two on the bottom row in the middle, the speaker was not set up so i connected it and there is no noise coming from that, the monitor is plugged into where it should be all ok there but it does absolutley nothing when powered up, and yes it is a ceronix monitor - it also makes a humming noise which is constant..but think thats just the power - dont have a key for the audit lock but have the jackpot/reset key - when i press reset button on game board the buttons on the front go off then come back on.
thanx in advance
Dave

[proten]

To make sure that the monitor is getting power, unplug the monitor at the power supply and plug
it in a separate plug. If that gets the monitor to work then check the fuses at the back of the
power supply. Then to run the self test, you hold the "Mem/Reset" button while turning on the
Machine. This will get you to the system test.

Hope this will help get you started.
Paul

[firefly_rfs]

Hi, once again... have unplugged the monitor from the macines power unit and plugged into wall power on its own..and wallah....absolutley nothing...would that be the crt or the board it connects to do you think?? and is there an easy way of checking., also here are some more pics, still after some parts for this said machine...have $$$$ dont want anything for free and that includes any manuals for this aristocrat 540 mkIV.. if anyone can point me in the right direction

[proten]

The monitor is not doing any thing? No static or clicking when turning on?
Then that means that the monitor is having issue, if you unplug the lead from the MPU board ( the
black lead from the front of the MPU) then pull the monitor out of the front.The power lead will
be in the back right corner. Repair the monitor and then you can get into the rest of the
machine. The hopper can be purchased from many parts suppliers and here are a few.
http://www.worldwide-gaming.com/s/Hoppers.html
http://home.sprintmail.com/~chetsowinski/slotmachineparts-aristocrat.html

[TZtech]

Hi

The great thing about Ceronix is that they have all the manuals and schematics available for free on their website- http://www.ceronix.com/products_modellists.html There are two types the 2092 and 2093. You should be able to see what yours is on the back of the monitor chassis. If you know which end of a soldering iron to grab onto and where to source parts you can attemmpt a repair. There are plenty of repair tips on this site for ceronix monitors. First thing is to check the fuse on the crt board.

If you are not confident about trying a repair maybe try these guys  - http://www.tektronikenterprises.com/. They are in Oz so should save you getting parts from the USA. Not sure what the laws on home wonership are there though.

Ian

[SS308]

Hi mate,
As for the hopper it is the same as Mk5.1 as the cabinets were identical except for a door change when Aristocrat put a bill acceptor in, your coin mech & diverter are the same too. There are places in Auz that sell them.I think I have a manual for 540 as well.send me an email to my username at hotmail dot com.

[craigt]

Hi There,

Any chance of you sending me a copy of the Mk4 manual?  I am trying to get a Mk4 working for my "archive" room.  It would really be appreciated.  My email is craigt@wozagaming.co.za

Regards