Welcome, Guest. Please login or register.
November 22, 2024, 05:37:15 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  bally S5500 progressive JP setup problem
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: bally S5500 progressive JP setup problem  (Read 3059 times)
resanberto
New NLG Member 1 to 100 Post
**

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 51


Mystery JP


« on: December 27, 2010, 02:38:58 PM »

Hi ,

I have 5 bally S5500 on the floor with linkend progressive jackpot installed.
the problem i have is that 1 machine  doesnt send jp signal after Jackpot is hit.
the other 4 are working ok after doing a test progressive with test 11 as discribe.
the test failed with the other machine.
i swap mpu board with a working one and the bell rings, means that there is no wire or other problem.
i think its the mpu that cause the problem.
when i takeout the mpu and insert it back and powerup the machine the bell rings causing a false jp.
any suggestion?

U7 already removed
jw9 installed for progessive jp


i also wanna try another mpu but this one give me error code 54 ...drop door open but we dont use drop door switches or optics


regards,

Alberto

Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #1 on: December 27, 2010, 07:02:22 PM »

Are the progressive settings matching the known working ones?
Maybe it's just a setting in the progressive configurations?
Jackpot harness okay?
Logged
resanberto
New NLG Member 1 to 100 Post
**

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 51


Mystery JP


« Reply #2 on: December 28, 2010, 09:33:39 AM »

thanks 4 reply
settings for prog jp are indentical as the other machines
harness is ok because i swap with a good one and it works.


alberto
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #3 on: December 28, 2010, 12:21:01 PM »

So it's working now?
Or do you have to replace the MPU?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 20 queries.