Welcome, Guest. Please login or register.
November 01, 2024, 02:42:14 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Electromechanical
| | |-+  E1113-6		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: E1113-6  (Read 3614 times)
deity2
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 45
« on: January 03, 2011, 01:52:15 AM »
ok, i bought this machine as "non-working" which is fine by me because parts is parts right?...well, i got it home yesterday and i put it on the bench (with help of course) anyway i plugged it in to see whats up with it....everything lights up coin accepter works even the step-ups only thing is it won't let me pull handle...i talked to gary (Amachanic) and he thought maybe the coil on the inside by the handle ...i had to pull out reel assembly to check readings with multi-meter and checks out..it is getting power and so is everything else so i don't know if i should just change coil ?  thanks
« Last Edit: January 03, 2011, 03:00:00 AM by deity2 » Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #1 on: January 03, 2011, 11:38:05 AM »
do a "2" test - this activates all the io in the machine - see if the coils activate (divertor - reels - and handle) - if they all activate in test - then it is a problem with IO or MPU board
Logged
Tomba
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 32
« Reply #2 on: January 03, 2011, 12:59:30 PM »
Also check the two switches on the reel=mechanism. In the wrong position the coil will not be activated because the machine thinks the arm is allready pulled.

Happy new year to all of you
Logged
mctuerk
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 22
Offline Offline

Gender: Male
Posts: 57
« Reply #3 on: January 03, 2011, 07:44:22 PM »
Look the air cylinder of the reel mechanism. I betimes got non working em and e series machines with the only defect of a non moving handle. The handle didn`t move because someone lubricated the piston cup seal with the wrong grease. The cup seal converts to’glueβ€˜ and you can`t move the link.
Logged
... only those who grow up and remain children are human
deity2
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 45
« Reply #4 on: January 03, 2011, 11:30:20 PM »
ok i did everything you guys suggested...the cylinder was sticky so i cleaned that up...i checked the two switches and they check out ok...i then did the test 2 and let that run for a while and watched everything....after i shut door to stop test i put coin in to see what would happen....at that time it did let me pull handle but i got a tilt light right away and an alternating 1 - 41....i did the reset and put a coin in again with the same results 1 - 41...what i don't understand is last night i did the test 2 and after i closed door it didn't seem to matter at all...then after more cleaning and (resetting chips) it wouldn't let me test at all...almost like the test button wasn't working at all ...i was about to give up when i noticed it finally worked...anyway   tilt 1 - 41  is what i have now (before reset)...thanks
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #5 on: January 03, 2011, 11:50:57 PM »
Here is the error codes for that machine

* Untitled.jpg (545.69 KB, 1704x2192 - viewed 294 times.)
Logged
One step at a time.
deity2
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 45
« Reply #6 on: January 04, 2011, 12:30:23 AM »
thanks for the info proten...after my ;ast post i went out and now i don't seem to have certain lights or power in different places...no door code either which i've always had on this machine....it's hard to tell but it almost looks like a number 6 in the first place but nothing afterwards   (all black)...i'm going back out to check wires and contacts...i'll post what i find...thanks bob
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.073 seconds with 20 queries.