S-2000 ERROR PRIMARY SAS DOWN

[Jim]

Read every post related to this subject. tried every suggestion mentioned.  have three machines doing the same exact thing.

Machines are coinless, no hopper,no coin. ticket printer is enabled  SG363 game chips. machines were working fine until I started to print tickets. the first few worked like they should, the next one out!  printed the ticket then came the error " PRIMARY SAS DOWN" 
suggestions were to disable the SAS by setting the address to 0. the address on my machine is at 001, the channel is 2, I cannot get the third digit to stop on 0. link  down is enabled,  cleared one machine by setting the validation to "system" (it was on standard) after changing that and nothing else, the primary sas down went away , game operated fine , when cashed out the machine would generate a handpay instead of a print ticket. (would have to clear the jackpot hand pay by using jackpot reset key , 0.75cent payout)  all machines worked until I printed the third or fourth ticket , then the error appeared.
Anyone have any thoughts or suggestions.
Thanks in advance

Jim 

[Foster]

Here are the settings from my S2000
Key II menu area
7.2.1.1 SAS Validation Type: standard
7.2.1,2 Validation Security: DISABLED
7.2.1.3.1

7.2.1.4 Hanpay Vailidation: Don't Allow Validation.

Under Machine Options Communications SAS Primary Link Down Game Enabled.

[brianfink]

ive had this problem before and i used key 97 to clear the memory then had to go back threw the settup and use key 17 to reset denomination and printer also dont use coinless mode just set the hopper limit to zero

[Foster]

I know what is was, I had to do something on my PC and is all well.