Welcome, Guest. Please login or register.
November 22, 2024, 08:35:23 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  3 reel to 3 reel + Bonus reel conversion. SS sizzlin sevens kit install		 0 Members and 5 Guests are viewing this topic. « previous next »
Pages: [1] 2 3 Go Down Print
Author Topic: 3 reel to 3 reel + Bonus reel conversion. SS sizzlin sevens kit install  (Read 26165 times)
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« on: February 03, 2011, 11:31:05 PM »
This thread is to ask questions and prepare for this project and to post pictures and results for others.

I have a few concerns and questions before I start just in case someone has some short cuts or insite. Or I need more stuff

I currently have a s2000 9"upright machine, short glass 5-5-2 credit meter and printer next to glass.

I bought a kit off Samron to finish off my collection of bonus reel stuff I needed to pull this off

First picture is the stuff I have, second is the machine as it is now. )other way around Silly Me!)

It will be a Super Spin Sizzlin Sevens bonus reel game when done.  I have the correct software (other post)

* IMG_0740.JPG (884.22 KB, 1600x1200 - viewed 377 times.)

* IMG_0868.JPG (1052.41 KB, 1600x1200 - viewed 393 times.)
« Last Edit: February 03, 2011, 11:45:06 PM by coorslight115 » Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #1 on: February 03, 2011, 11:34:17 PM »
Things I know about:

Replace 3 reel back lit controller with 5 reel version

Jump connector for cabinet i/o (picture one)

Extend printer harness to top box (2nd picture)

* IMG_0870.JPG (1067.39 KB, 1600x1200 - viewed 392 times.)

* IMG_0871.JPG (859.94 KB, 1600x1200 - viewed 363 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #2 on: February 03, 2011, 11:36:37 PM »
Re-route door harness for short glass meter to the long glass.

* IMG_0873.JPG (961.72 KB, 1200x1600 - viewed 332 times.)

* IMG_0874.JPG (989.85 KB, 1600x1200 - viewed 329 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #3 on: February 03, 2011, 11:38:11 PM »
Change player tracking bracket to short one to accept top box printer

* IMG_0876.JPG (918.87 KB, 1600x1200 - viewed 390 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #4 on: February 03, 2011, 11:40:09 PM »
Install printer bracket and printer (1st question)  wires are in the way of the bracket Scratch Head

* IMG_0875.JPG (995.59 KB, 1600x1200 - viewed 360 times.)

* IMG_0877.JPG (973.82 KB, 1600x1200 - viewed 325 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #5 on: February 03, 2011, 11:42:29 PM »
Door optics and cherry switch question. New reel shelf will not accept this setup and they would be in the way of the bonus reel. Best way to relocate??

* IMG_0869.JPG (998.48 KB, 1600x1200 - viewed 347 times.)

* IMG_0872.JPG (773.36 KB, 1200x1600 - viewed 334 times.)
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #6 on: February 03, 2011, 11:50:34 PM »
Here's where my switches are.

* 100_0380.JPG (607.75 KB, 2048x1536 - viewed 353 times.)

* 100_0381.JPG (750.55 KB, 2048x1536 - viewed 326 times.)
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #7 on: February 03, 2011, 11:53:32 PM »
on door, Ford

* 100_0382.JPG (794.02 KB, 2048x1536 - viewed 377 times.)
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #8 on: February 04, 2011, 12:06:51 AM »
As for wires @ printer. Some of my machines have the connectors pulled from bracket so they will lay below bracket.
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #9 on: February 04, 2011, 12:09:32 AM »
Quote from: FORDSBS on February 04, 2011, 12:06:51 AM
As for wires @ printer. Some of my machines have the connectors pulled from bracket so they will lay below bracket.

That is what I was going to do ! But wanted to ask first
 Crazy
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #10 on: February 04, 2011, 12:13:24 AM »
For the optic switch & plate to contact cherry switch there should be holes in slide higher to mt. them.
Ford
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #11 on: February 04, 2011, 12:16:06 AM »
optic on cabnet mount is part of cabnet. you'll have to make a bracket
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #12 on: February 04, 2011, 12:20:34 AM »
Quote from: FORDSBS on February 04, 2011, 12:13:24 AM
For the optic switch & plate to contact cherry switch there should be holes in slide higher to mt. them.
Ford

The slide has the holes, but the cabinet edge is totally different

* IMG_0878.JPG (972.96 KB, 1600x1200 - viewed 349 times.)

* IMG_0879.JPG (910.55 KB, 1200x1600 - viewed 348 times.)
Logged
Magicslots
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 62
Offline Offline

Gender: Male
Posts: 810
« Reply #13 on: February 04, 2011, 12:24:47 AM »
My printer is on the left side of the box, here is a couple of pics.  Hope they help  yes

* p1.JPG (46.54 KB, 640x480 - viewed 352 times.)

* p2.JPG (48.25 KB, 640x480 - viewed 325 times.)
Logged
"Any man who is under 30, and is not a liberal, has no heart; and any man who is over 30, and is not a conservative, has no brains."  (Sir Winston Churchill)
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #14 on: February 04, 2011, 12:27:34 AM »
Look close @ pic. What they did was cut & bend out for optic.

* 100_0383.JPG (778.27 KB, 2048x1536 - viewed 357 times.)

* 100_0384.JPG (798.81 KB, 2048x1536 - viewed 337 times.)
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #15 on: February 04, 2011, 12:35:18 AM »
FWIW, I moved all of my door optics to a convenient location so that I can easily work on the machine with the door open. I just stick a piece of cardboard between them when I need to simulate the door open. I know there are other ways to bypass the optics, but this keeps everything without modification and is easy to implement.

* optics.jpg (147.05 KB, 656x604 - viewed 319 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #16 on: February 04, 2011, 12:38:37 AM »
Is the cherry switch in question only for the light? or door open too? Scratch Head
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #17 on: February 04, 2011, 12:40:46 AM »
Quote from: coorslight115 on February 04, 2011, 12:38:37 AM
Is the cherry switch in question only for the light? or door open too? Scratch Head
Not sure but that should not be to hard to move. There should be holes in side to mt where it goes.
Hope we are helping you Tim
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #18 on: February 04, 2011, 12:48:09 AM »
Quote from: FORDSBS on February 04, 2011, 12:40:46 AM
Quote from: coorslight115 on February 04, 2011, 12:38:37 AM
Is the cherry switch in question only for the light? or door open too? Scratch Head
Not sure but that should not be to hard to move. There should be holes in side to mt where it goes.
Hope we are helping you Tim

Lots of help !! Clap

rather work all this out now before the machine is in a million parts !! Crazy Cry Laughing

I like to plan ahead and anticipate road blocks yes yes

also this will make an all in one post for the next guy to do this wave wave yes yummy
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #19 on: February 04, 2011, 12:51:22 AM »
Glad to help. Just returning all the help you give.
Ford
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #20 on: February 04, 2011, 12:56:45 AM »
Quote from: coorslight115 on February 04, 2011, 12:38:37 AM
Is the cherry switch in question only for the light? or door open too? Scratch Head

Not sure about a S2000, but the S+ I recently got had a bunch of cherry switches (including on the door), but when I traced them all out, they were not even connected to anything anymore (maybe used for casino security at some point), so I just pulled them all out.
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #21 on: February 04, 2011, 12:58:29 AM »
Quote from: poppo on February 04, 2011, 12:56:45 AM
Quote from: coorslight115 on February 04, 2011, 12:38:37 AM
Is the cherry switch in question only for the light? or door open too? Scratch Head

Not sure about a S2000, but the S+ I recently got had a bunch of cherry switches (including on the door), but when I traced them all out, they were not even connected to anything anymore (maybe used for casino security at some point), so I just pulled them all out.

It at least turns the service light on and off.
Logged
jer3270
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Posts: 192
« Reply #22 on: February 04, 2011, 05:31:25 PM »
I have an s2000 that has been converted to the 4th reel  ( just put the super spins sizzlin 7's in from samron's awesome game!) My bracket for the connectors to top cabinet where you are moving the printer to ,just hangs with a zip tie and no problems. The problem is trying to  figure something out for the satellite speaker wire before it gets smashed by the printer bracket. My wires run on top of the printer. Kind of fun when pulling the printer out and in, but keeps them from getting more smashed than they are. Good luck! Let me know if I can help or post  a picture of something.
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #23 on: February 04, 2011, 05:53:41 PM »
When I put the printer after getting the proper bracket to fit in the top box
I just ran the wire under the printer and up the left side of printer and plugged it into the speaker connector.

There is enough room to get the wire and connector through on the left side.
If you position the connector correctly and feed enough wire though the connector will come within easy reach without any tools.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #24 on: February 05, 2011, 12:58:48 AM »
Last part needed arrived today arrow  THANKS! Bob( rjpohl from Samron)  Hail Hail

5 reel backlit controller board and cover

Project to start in the AM

* IMG_0884.JPG (1080.48 KB, 1600x1200 - viewed 334 times.)

* IMG_0880.JPG (1071.09 KB, 1600x1200 - viewed 349 times.)
Logged
Pages: [1] 2 3 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.136 seconds with 20 queries.