NEED HELP INSTALLING NEW GAME CHIPS

[vegasbaby]

Hi
This is my first s2000 slot,I'm changing the game chips from a 10x pay game to a sizzling sevens game.I installed the first 3 chips as those 3 chips matched in wordage- #1 STEPPER-BASE #2 STEPPER GAME 1 #3 STEPPER GAME 2.All with the top grove area to right as like the ones i took out.I have one chip left to install its #v5011gx1 dose it go where the chip that's on the board  reads step-ver vs006gx or dose it go where my 2nd choice is this chip reads SS7850.Dose my remaining chip fit in the slot chip marked step-ver vs006gx or dose it go where the other chip SS7850 is located.My guess is that my remaining chip gos where the chip reading step-ver v50006gx and if so do i just remove the other chip SS7850 completely or leave it in?
THANKS FOR YOUR HELP!
MARK

[Bettor Slots]

Remove the SS chip and save it for when you want to put 10XPay back in.  Replace the VS006 chip with your fancy new VSO11GX1 chip.

[Bettor Slots]

By the way your SB100087 supports enhanced sound if you want to get away from the ring a ding ding Legacy sound you are currently enjoying.  Just add a piggy back MM2 board and a DSV042 sound simm.

[vegasbaby]

THANKS JIM,GOT THEM INSTALLED,IM GETTING CLOSER.

Hi
This is my first s2000 slot,I'm changing the game chips from a 10x pay game to a sizzling sevens game.I installed the first 3 chips as those 3 chips matched in wordage- #1 STEPPER-BASE #2 STEPPER GAME 1 #3 STEPPER GAME 2.All with the top grove area to right as like the ones i took out.I have one chip left to install its #v5011gx1 dose it go where the chip that's on the board  reads step-ver vs006gx or dose it go where my 2nd choice is this chip reads SS7850.Dose my remaining chip fit in the slot chip marked step-ver vs006gx or dose it go where the other chip SS7850 is located.My guess is that my remaining chip gos where the chip reading step-ver v50006gx and if so do i just remove the other chip SS7850 completely or leave it in?
THANKS FOR YOUR HELP!
MARK

PROBLEM SOLVED