Welcome, Guest. Please login or register.
November 23, 2024, 02:56:07 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Adding sound to a Bally E2212		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Adding sound to a Bally E2212  (Read 10946 times)
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« on: February 18, 2011, 03:14:18 AM »
I have a Bally E 2212-26  3 reel 5 coin slot
and I'm thinking of adding a sound board.
How do you find out if the P1 chip
( # 552992 ) is compatible for sound ?

Also i get a over pay of 1 coin
but it is very random and no error, 1coin in every
10 to 20 pulls.  Any ideas what to look at,
I've checked the coin out switch, it's ok.

Paul

* Harrah2.jpg (753.78 KB, 1536x2048 - viewed 318 times.)
« Last Edit: February 21, 2011, 01:34:41 AM by proten » Logged
One step at a time.
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #1 on: February 18, 2011, 11:23:55 AM »
Check on the back of the hopper motor. There is a lever that works like a brake. Make sure it's moving freely, I had on over paying and no error. Found it to be that brake was sticky. Barry at Foxsslots should know about the sound board question. If you need one I think I have a complete one out a a machine I parted last year.

Gary
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #2 on: February 18, 2011, 03:32:21 PM »
Thanks Amachanic

PM me the price and shipping for
the sound board to 78620.
Would you have the speaker,
transformer and wiring also?

Paul
Logged
One step at a time.
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #3 on: February 18, 2011, 03:42:32 PM »
your P1 prom does have the sound option.  I do not have any sound parts for your machine. 
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #4 on: February 18, 2011, 03:48:29 PM »
Thanks Barry

Is the ribbon cable you have listed on ebay
the right one for the sound card?

Paul
Logged
One step at a time.
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #5 on: February 18, 2011, 04:41:12 PM »
have the ribbon cable that goes from the io board to the sound board - you will need the sound board - speaker - transformer - hopefully the wiring is in the machine.
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #6 on: February 18, 2011, 11:31:34 PM »
Proten... So far I have found the sound board and mounting plate and a ribbon cable. I have a box where I put all the wiring I stripped out of the machine. If it was in the machine I should have it. The only thing I threw out was the cabinet. So I guess I need to find a transformer now Scratch Head, sure wish I remember what it looked like.. Silly Me!

* sound board.JPG (1591.78 KB, 3072x2048 - viewed 344 times.)

* soundboard.JPG (1617.76 KB, 3072x2048 - viewed 296 times.)
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #7 on: February 18, 2011, 11:32:53 PM »
PM Sent
« Last Edit: February 18, 2011, 11:39:04 PM by Amachanic » Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #8 on: February 18, 2011, 11:53:49 PM »
Barry... Does the transformer for the sound board plug into J1 on the sound board? J2 is the ribbon cable, and I'm guessing J3 is where the speaker plugs in? The manual doesn't say and I don't remember.
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #9 on: February 19, 2011, 12:28:23 AM »
Here is the page from my Bally book.

* soundcard.jpg (271.36 KB, 1065x1370 - viewed 358 times.)
Logged
One step at a time.
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #10 on: February 19, 2011, 12:57:21 AM »
Yea I have that book too and that's the sound board I have.. I went through my box of wiring and found a small transformer #E122-157, 37-8424..  See pic.. The speaker is still missing, but I did see one on Ebay tonight... Heres that listing..

http://cgi.ebay.com/bally-slot-machine-speaker-/280630910612?pt=LH_DefaultDomain_0&hash=item4156e7de94

* E-122.JPG (640.23 KB, 3072x2048 - viewed 349 times.)

* transformer.JPG (877.51 KB, 3072x2048 - viewed 322 times.)
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #11 on: February 19, 2011, 02:47:04 AM »
 +1 (Karma, or whatever) Gary for digging through your things and searching ebay to help Paul.  Hail applause applause

Stat garfield
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #12 on: February 19, 2011, 12:04:53 PM »
Thanks Stat..   Mail  Always glad to help where I can, Isn't that what Newlifegames is all about. Scratch Head Help
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #13 on: February 19, 2011, 04:14:29 PM »
Quote from: Amachanic on February 19, 2011, 12:04:53 PM
Thanks Stat..   Mail  Always glad to help where I can, Isn't that what Newlifegames is all about. Scratch Head Help
yes yes yes yes wave wave applause applause applause applause
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #14 on: February 19, 2011, 09:31:55 PM »
Hi Amachanic

By the bally book I have, the transformer is not
the right one. I haven't found the part number
but the wire color is wrong. The transformer you
have shows (Red & Black wires) in my book as for the Progressive
display. The book shows the transformer that I need has
 Black & Green wires. Is this right?

Paul

* Untitled.jpg (551.82 KB, 1704x2192 - viewed 346 times.)
Logged
One step at a time.
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #15 on: February 19, 2011, 10:45:04 PM »
time for me to step in - the transformer E122-157 IS CORRECT - you need that - a speaker - 8 ohm -  ribbon cable from the IO board  (daughter board) for the IO board - the wiring - fuse block extra 5amp circuit (if fuse block has 6 fuses already - then you are all set). 
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #16 on: February 19, 2011, 10:56:28 PM »
Thanks again Barry

Paul
Logged
One step at a time.
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #17 on: February 20, 2011, 01:34:24 AM »
Thanks Barry... Gary

Paul.. Where do we stand? So your going to need this transformer, the sound board, ribbon cable. I have the complete wiring and fuse block from the machine it was removed from. The only thing I don't have is the speaker, or at least I can't find it. Does your machine have the 6 fuse block?  I'm still a novice at this but learning more every day. Let me know what your going to need and we'll get it on your way....

Gary
« Last Edit: February 20, 2011, 01:49:23 AM by Amachanic » Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #18 on: February 20, 2011, 05:49:27 PM »
Hey Paul... I found the speaker to go with the rest of the sound board parts if your still interested.. Let me know.   Mail   Thanks Gary 
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #19 on: February 21, 2011, 12:45:21 AM »
Hi Gary

I checked my machine and it has the 6 fuse block.
I will take the sound board, 24" ribbon cable, speaker and transformer.
PM me you paypal name and the amount due, I will send you payment.

Paul
Logged
One step at a time.
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #20 on: February 22, 2011, 03:16:36 AM »
Hi Gary

Payment sent and Thank you for taking the time to look for these parts.
Thanks Barry for your help and expertise. It's guys like you two that make
this such a great site.

Paul 
Logged
One step at a time.
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #21 on: February 22, 2011, 11:17:09 AM »
Paul, I'll get the package over to UPS today and I'll send you the tracking number later tonight. Good luck with your machine. Gary
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #22 on: February 23, 2011, 12:56:23 AM »
Quote from: FOXSSLOTS1 on February 19, 2011, 10:45:04 PM
time for me to step in - the transformer E122-157 IS CORRECT - you need that - a speaker - 8 ohm -  ribbon cable from the IO board  (daughter board) for the IO board - the wiring - fuse block extra 5amp circuit (if fuse block has 6 fuses already - then you are all set). 

PM Sent
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #23 on: February 23, 2011, 12:58:56 AM »
I just found this small board attached to my spare I/O Board tonight. Is this the Daughter board thats needed to make the sound board work?

* IO Daughter Board.JPG (1932.27 KB, 3072x2048 - viewed 332 times.)

* IO with daughter board.JPG (1987.37 KB, 3072x2048 - viewed 331 times.)
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #24 on: February 23, 2011, 07:57:39 AM »
yes that is the daughter board - there is a small wire harness with a black and a red wire that attaches to it.
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.112 seconds with 20 queries.