Welcome, Guest. Please login or register.
November 22, 2024, 06:05:57 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S-2000 Sound Problem Only 1 top speaker working		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S-2000 Sound Problem Only 1 top speaker working  (Read 10250 times)
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« on: March 30, 2011, 10:13:41 PM »
I have an s-2000 Triple Lucky 7s that only one top speaker works. Scratch Head The speaker is good ( switched wires then the other one works ). Is there a setting in the menu that would allow both speakers to work? I had gone into the menu but didn't see any settings for stereo. Scratch Head  I had switched the board in the top box that the 4 prong speaker plug goes into with another one same thing. Thanks in advance for any help! Help
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #1 on: March 30, 2011, 10:43:51 PM »
3 Options
  2 Sound
    6 Multimedia
      1 Audio Mode (3.2.6.1) change it to stereo

You have to have the multimedia board with a sound simm installed on the MPU or on the enhanced mpu board a sound simm installed on the legacy adapter.
Also look at your speaker/audio harnesses from mpu to top box to the Amp to the speakers make sure you do not have any broken or damaged wires.

If either of the two loop wires at the black connector are cut it can also cause issues.
« Last Edit: March 30, 2011, 11:02:01 PM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #2 on: March 30, 2011, 11:11:03 PM »
Foster  Wires look to all be intact. I got to #3 options -  2 sound but did not see multimedia option. When you mention the multimedia board with a sound simm installed on the MPU or on the enhanced mpu board what am I looking for? Nerd My mpu board has no additional board plugged onto it. Are you saying that without the multimedia board sound will only be out of one speaker? Forgot to mention this is a new machine so I don't know if it ever has worked. Thanks
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #3 on: March 30, 2011, 11:29:00 PM »
Sounds like do not have a Multimedia Lite 2 board installed and your MPU is a 501, 502, 504, 50x serires of MPU.

Let me try something pull my MMLB and see what happens to my sound (other than it sounding like a S+) it has been a while since I ran my S2000 without a MMLB installed during normal use.


Update:
Okay you have to have either the mono harness from top box to amp or have a MML2 board and sound simm installed to have sound out of both speakers.

  wtf1 did they design that way.

You have 2 options
Buy a MMLB and the matching simm for your theme or DSV 42 sound simm and install it (This is your best option)
OR
Buy a mono harness or make your own
« Last Edit: March 30, 2011, 11:49:03 PM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #4 on: March 30, 2011, 11:49:03 PM »
Foster  You are right no Multimedia Lite 2 board on the mpu. I also have a TDD that both top speakers work. It also doesn't have the Multimedia Lite 2 board. Scratch Head It may have something that the Lucky 7s doesn't? Not sure where to look from here. Would there be any harm in connecting the speakers together if no other options? That way there would be sound just not stereo.   
Logged
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #5 on: March 30, 2011, 11:52:03 PM »
Photo 1 orange circled area shows where the MM2 Lite would be installed.  Green circle shows the sockets where the MM2 Lite plugs in.

Photo 2 shows the MM2 lite board.  Orange circled area shows where the sound SIMM is installed.

Without either of these components installed, mono sound is all that you'll get.

Thanks,
Jason

* $(KGrHqN,!h0E2JOky5PNBNkN6NJbyw~~_3.jpg (103.03 KB, 800x600 - viewed 386 times.)

* igt-multimedia-lite-ii-enhanced-sound-board-dsv00042_150577318497.jpg (43.41 KB, 400x241 - viewed 395 times.)
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #6 on: March 30, 2011, 11:54:11 PM »
Look at the 2 harnesses coming from the top box to the amp one is a stereo harness the other is a mono harness to make both speakers work (it splits the left output to both inputs of the amp.
Stereo harness is in the machine with only one speaker working the mono harness is in the machine with 2 speakers working

Stereo for machines with MMLB and Simm installed.
   ^ latch
X X X X   inputs to amp (white and green wires with green/blue/violet(purple) stripe
X X O O         output to tray speaker (yellow and white)

Mono harness (machines without MMLB)
     ^ latch
X X O O inputs
X X O O output to tray speaker
  
X - connectors
0 - open or empty
« Last Edit: March 31, 2011, 02:24:45 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #7 on: March 31, 2011, 12:12:52 AM »
Jason thanks for the pics. I don't have them.   Foster  What am I looking for at the amp?  Nerd Poss to post pics?  Thanks to both for your help.
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #8 on: March 31, 2011, 02:31:16 AM »
Picture of stereo harness connector machine end. The other end goes to amp

One of your machines has that one (sound only coming out of one speaker)
the other machine will have 2 white with blue stripe and 2 green with blue stripe combined into 2 pins
The yellow /white wires are for the tray speaker output.
That connector is at the left rear of top box.

* IMAG0033.jpg (767.38 KB, 3264x1952 - viewed 415 times.)
« Last Edit: March 31, 2011, 02:39:19 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #9 on: March 31, 2011, 01:46:06 PM »
Ok I see the difference in the wires. applause The machine with both speakers working is in the 1st pic. The one with one speaker working in the 2nd. So my question is short of buying the Multimedia board what do I have to do to get sound from both speakers? Would it be ok to tie the speaker wires together in the top box?  yes no

* DSCN3056.JPG (173.79 KB, 1024x768 - viewed 420 times.)

* DSCN3057.JPG (179.82 KB, 1024x768 - viewed 454 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #10 on: March 31, 2011, 02:18:20 PM »
Quote from: erbs on March 31, 2011, 01:46:06 PM
Would it be ok to tie the speaker wires together in the top box?  yes no

Sure!
If you want to see some smoke packaged from China... Tongue Out
 
 Burning Resistor

You really oughta to wait a couple of posts until someone
with a multimeter and electronic expertise tries it first...just my 2 cents...
Logged
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #11 on: March 31, 2011, 02:47:33 PM »
Thanks for the advice, Ill wait.
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #12 on: March 31, 2011, 05:22:53 PM »
I don't see why splicing in the other speaker would make a problem. I have the same issue. But a MM2 Lite board is like 40-50 off Flea bay and the sound simm not much more. That might be the way to go. I am not happy with the sounds that my machine makes now anyway.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #13 on: March 31, 2011, 06:10:58 PM »
Wire the speakers in series and it will work ..  and it will not cause smoke.

In other words ..

Since I am not sure the the color of the strip in the white and green wires .. I am just going to call it them the white and green wire.

Cut the white wire on working speaker.

Cut both wires on the none working speaker.

Connect the working white wire from the working speaker to the green wire of the none working speaker.

The white wire from the none working speaker connects to the white wire that was cut from the working speaker.

The image shows a crude drawing.

* Speakers in Series.jpg (12.71 KB, 399x285 - viewed 403 times.)
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #14 on: March 31, 2011, 07:07:28 PM »
K+ for the explanation and diagram, Ken.  I need to do that with a machine I'm planning to sell.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #15 on: March 31, 2011, 07:50:56 PM »
Both speakers working great. applause Clap applause  Clap applause Clap applause  Thanks Ohio Gaming for the diagram. I hooked the wires in series like the diagram shows with no problems at all. I thought it could be done but needed a little assurance so I would not Burning Resistor something. K+ to all for your help. Ed
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #16 on: March 31, 2011, 08:21:09 PM »
That is how the old vision mono wiring was done.
For s2000 with amp  they split the A channel from the machine so it goes to both A And B inputs on the amp.
I do not know if the amp can handle a increase in impedance I know they do not like a decrease in impedance.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #17 on: March 31, 2011, 11:16:04 PM »
Thanks K .. I would do the splicing before the connectors on the amp side.

Sorry for such a crude drawing .. Where is Bunker when you need him?

YW erbs .. glad it worked for you.
Logged
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #18 on: April 29, 2011, 01:36:02 AM »
I also tested out Ken's diagram and it works great!  Thanks Ken!

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #19 on: April 29, 2011, 01:41:06 AM »
I did it, works really well
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.136 seconds with 20 queries.