Welcome, Guest. Please login or register.
September 28, 2024, 05:23:18 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT Reel Touch Games
| | |-+  Reel Touch Bill Validator Doesn't Light Up		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Reel Touch Bill Validator Doesn't Light Up  (Read 15451 times)
Captain Hook
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 26
Offline Offline

Posts: 136
« on: April 23, 2011, 02:24:45 PM »
The Bill Validator on my Reel Touch does not light up.

If you open the door and look at the back of the Bezel it has a small LED board that should light up the front where it says insert bills

There is a harness plugged into the board but I dont know where the other end goes or if its connected to anything.

Any help????

Thanks much

Captain Hook

* SANY2383.JPG (268.04 KB, 1280x720 - viewed 309 times.)
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #1 on: April 23, 2011, 02:55:25 PM »
That looks like a JCM Sentry Bezel, if it was on but malfunctioning the lower symbols have an "ambulance" icon; that indicates that the bezel or BV is malfunctioning but in this case you have nada! You might have to see physically where that wire goes and find out if it's unplugged somewhere or not, basic troubleshooting I know, but a first step. BTW, that bezel is a really hot item, it indicates what denomination bill was inserted in the BV.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
Captain Hook
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 26
Offline Offline

Posts: 136
« Reply #2 on: April 23, 2011, 04:22:16 PM »
I just spent an hour trying to figure out where the other end on the wire to the bezel goes and now I have another problem.

I shut the machine down and took the 5 reel assembly's out to get a better look at the wiring and when I put them back in and turned the machine on

I am getting a reel 3 tilt message and the 5 reels just spin slowly and it says call attendant.

I tried reseating the 5 reels but no luck.

I have had these reels out many times before to change strips with no problems but now what could I have done???

Captain Hook
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #3 on: April 23, 2011, 04:35:17 PM »
Ok, with the door open, turn the jackpot reset key once, that should clear the "Reel M" error
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #4 on: April 23, 2011, 04:37:29 PM »
Rick I sent you a email

Did you turn the jackpot key to get the reel to stop spinning ??  
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Captain Hook
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 26
Offline Offline

Posts: 136
« Reply #5 on: April 23, 2011, 06:19:47 PM »
Yes I figured it out.

Thanks for all the help.

Captain Hook
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #6 on: April 24, 2011, 12:57:32 AM »
You got the Sentry working as well?
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Captain Hook
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 26
Offline Offline

Posts: 136
« Reply #7 on: April 24, 2011, 02:25:03 AM »
No I got the machine working again but the Bill Validator still

does not light up.

Im hoping it just needs to be plugged in somewhere but I dont know where it connects.

Captain Hook
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #8 on: April 24, 2011, 02:40:36 AM »
THERE is a   edit (black) cable that plugs into the front plastic piece with the symbols on the front it goes back to the bill validator. there is a different plug in harness that lights the led lights  . post a pic . i will take pic tomorrow of this for you   which part wont light up the green part or the  top part with the symbols
« Last Edit: April 24, 2011, 08:25:55 PM by PLUNGER BOY » Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #9 on: April 24, 2011, 02:59:10 AM »
Pictures of Entry Bezel(lamp version) with WBA Sentry
the first picture is of the bezel I am pointing to the Sentry board near the right edge is small connector you can see the small wires near the board.
closer in the picture is the Lamp board see the black connector at the right edge (sort of upper right in the picture
Your machine may have a LED board in place of of the lamp board (the one closest in the picture)

The BV has 4 connectors coming from it
2 pin for power from machine, red and black wires.
3 pin unused on mine
4 pin with 2 wires (black and white wires)
5 pin Netplex (machine interface)

Machine has 3 connectors
2 pin power red and black wires.
4 pin but only with 2 wires activates the Bill Validator Bezel lamp or LED board on door (not the Sentry display you have in the bezel.
   Yellow with black and black with yellow wires
5 pin 5 green wires with different stripes (red, black, brown, orange, blue) machine interface.

Sentry harness at the bezel it has a small white connector
At the BV end it has 4 connectors it will have either black or other color shrink tubing over it.
Male and female 2 pin connectors taps the 13 V power to the BV to power the Sentry.
Male and female 5 pin connectors this plugs between the BV and machine interface 2 wires go to the Sentry the other 3 go to BV.

does the BV work?

* IMAG0043.jpg (1321.52 KB, 3264x1952 - viewed 304 times.)

* IMAG0045.jpg (1514.84 KB, 3264x1952 - viewed 341 times.)
« Last Edit: April 24, 2011, 03:31:22 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #10 on: April 24, 2011, 03:06:55 AM »
FOSTER BEAT ME TO IT . I DONT LIVE WERE MY MACHINES ARE
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #11 on: April 24, 2011, 03:34:25 AM »
Quote from: PLUNGER BOY on April 24, 2011, 03:06:55 AM
FOSTER BEAT ME TO IT . I DONT LIVE WERE MY MACHINES ARE


You might want to move some machines home!
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #12 on: April 24, 2011, 03:38:58 AM »
NO I JUST NEED TO MOVE TO THE NEW HOUSE WERE THE MACHINES ARE .THE CURENT HOUSE IS 1800 SQ FT THE NEW HOUSE 8000 SQ FT
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #13 on: April 24, 2011, 03:44:03 AM »
PLUNGER BOY   Are you a Texacan ????    Silly Me! Silly Me! Silly Me!
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #14 on: April 24, 2011, 03:45:19 AM »
 NO A PLUMBER  $$$$$$$
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #15 on: April 24, 2011, 03:46:20 AM »
I would be happy with 1800 SQ FT.
I have 500 SQ FT.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #16 on: April 24, 2011, 03:51:50 AM »
With taxes and insurance and general maintenance. your probably smarter to stay were you are . living large is very expensive. i have no kids so I'm going to spend it all on me
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #17 on: April 24, 2011, 03:53:24 AM »
No kids here either.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #18 on: April 24, 2011, 03:59:20 AM »
They must have plumbers in Texas, I would think with all the BS coming from the residents of Texas a plumber would be in HIGH demand.  stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking

I better go to bed, the NLG cops are going to get me again.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #19 on: April 24, 2011, 04:07:23 AM »
Rick  In a nut shell the wires go below the play buttons and into the machine next to the hinge. About a foot or so inside the machine ( behind and below #1 reel,) the wires plug into another plug that's just hanging out in the air. All of them I have had, it's been a real small black plug.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #20 on: April 24, 2011, 04:14:35 AM »
Buzz
I forgot about that one.
Thanks

The wires are yellow/black and black/yellow
There is white molex 2 pin connector near it
Leave that white molex alone or you will be wondering why your machine shows the door is open when it is closed.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Captain Hook
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 26
Offline Offline

Posts: 136
« Reply #21 on: April 24, 2011, 12:25:18 PM »
Thanks for all the reply's.

Anyway the BV works fine and the machine is working.

The problem is the Green Bezel does NOT light up and neither do any of the symbols on the front of the BV.

Captain Hook
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #22 on: April 24, 2011, 12:47:30 PM »
Have you checked the power wires going to that bezel with a meter? Maybe it's just a bad bezel?
Logged
Captain Hook
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 26
Offline Offline

Posts: 136
« Reply #23 on: April 24, 2011, 02:04:49 PM »
I decided to check the obvious things and took the board out to check the bulbs.

Both bulbs are bad.

What number are these bulbs and where can I get some????

Below are pictures of the board in question.

I checked for voltage on the wires and the Red wire has 12-13 volts on it to ground or the black wire.

So I guess I need bulbs.  Also this does not solve the issue with the digital display not working.

Thanks Much

Captain Hook

* SANY2384.JPG (266.93 KB, 1280x720 - viewed 269 times.)

* SANY2385.JPG (249.63 KB, 1280x720 - viewed 281 times.)
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #24 on: April 24, 2011, 02:40:53 PM »
So you have voltage going to the digital display? Your bad bulbs are #73's
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.094 seconds with 20 queries.