Welcome, Guest. Please login or register.
November 23, 2024, 05:42:31 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  s2000 dead as a door nail		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 3 Go Down Print
Author Topic: s2000 dead as a door nail  (Read 26972 times)
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« on: May 20, 2011, 08:05:15 PM »
Not mine, but a friend of mine has a s2000 that is dead as a door nail. The only thing that works at all is the inside work light (refrigerator). No MPU lights, no BV noise, not even the Fluorescent light in the door.  He has changed known good parts like.....

MPU
backplane processor
main power box
power supply behind the reels
power on/off switch

still nothing, I put his MPU in one of my machines and it works.  I do know when the problem occurred he was saying the spin reel button acted funny and might have came loose in the door.

any help for this guy ?

    thanks

   waving flag   U.S.Auto Service
       Dan
Logged
waving flag  U.S.Auto Service
      Dan
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #1 on: May 20, 2011, 08:33:45 PM »
SOunds as if the power supply is not getting 115vac to it.  you can check any plug that has a orange wire with a black/orange wire =+25vdc. or red wire with a black /red wire +13 vdc.  the +25vdc power all the flor. lamps.

If the power supply is good, then your problem has to be down in the units mounted to the backwall at the bottom.  the brownand blue wires carry the 115vac from here to the power supply.

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #2 on: May 20, 2011, 08:41:52 PM »
Quote from: Jim on May 20, 2011, 08:33:45 PM
Sounds as if the power supply is not getting 115vac to it.  you can check any plug that has a orange wire with a black/orange wire =+25vdc. or red wire with a black /red wire +13 vdc.  the +25vdc power all the flor. lamps.

If the power supply is good, then your problem has to be down in the units mounted to the backwall at the bottom.  the brownand blue wires carry the 115vac from here to the power supply.

Jim





Is there any chance that the power CORD could be bad ?  it is in a basement and maybe a mouse or poor installation might have damaged the cord.
 I think he just bolted the machine down to a bench, maybe he pinched the wires...

Try a diffrent cord and also a diffrent wall receptacle.   !

  waving flag  U.S.Auto Service
        Dan
Logged
waving flag  U.S.Auto Service
      Dan
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #3 on: May 20, 2011, 08:44:18 PM »
Yeah, it's my Red White Blue again!
Last night I was playing it and decided to even out the credits when I quit. I hit bet 1, 2, 3 then hit the SPIN button not the BET MAX button and zzzzzztttttttt................

Been at it since then and I swapped out every thing it it with known good parts.
The last thing I did was just for kicks, I pulled the power cable off the motherboard while the power was on......... MY DOOR LIGHT CAME ON Scratch Head

I then proceeded ever so cautiously to plug the power cable back in with the light on and ZZZZZZTTTTT.......... again1 Scratch Head

Could it be a dead short somewhere????

HELP............. LOL

JR
 hissy fit
Logged
WGAS!
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #4 on: May 20, 2011, 08:46:30 PM »
Read the post above...

but mostly read this Try a diffrent cord and also a diffrent wall receptacle.    !


  waving flag   U.S.Auto Service
        Dan
Logged
waving flag  U.S.Auto Service
      Dan
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #5 on: May 20, 2011, 08:49:02 PM »
I did that too, I took the power cable from my Big Times .................
Logged
WGAS!
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #6 on: May 20, 2011, 08:50:05 PM »
Stuck my volt meter in the cord................ voltage is good..
Logged
WGAS!
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #7 on: May 20, 2011, 08:53:10 PM »
Quote from: slotsx2 on May 20, 2011, 08:44:18 PM
Yeah, it's my Red White Blue again!
Could it be a dead short somewhere????
JR

                                                                                                                                                    Cry Laughing
It's not a dead short unless you see smoke or smell something burning, or of course the , obvious flames and heat...

plug your big times pay into the same receptical, worth a try.

    waving flag    U.S.Auto Service
      Dan
Logged
waving flag  U.S.Auto Service
      Dan
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #8 on: May 20, 2011, 09:05:51 PM »
Try swapping the BV, make sure they both work.  It's a stab in the dark, but its can't hurt.

sway the bill can too, might be jamming, don't assume anything...

The CPU doesn't even need to be in the machine for the BV to cycle

    waving flag   U.S.Auto Service
        Dan
« Last Edit: May 20, 2011, 09:22:41 PM by usautoservice » Logged
waving flag  U.S.Auto Service
      Dan
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #9 on: May 20, 2011, 09:11:45 PM »
Played with that several times..........
Logged
WGAS!
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #10 on: May 20, 2011, 09:33:05 PM »
Unplug the door harness just to eliminate and button or harness shorts in the door. Just a stab in the dark !!
Logged
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #11 on: May 20, 2011, 09:34:17 PM »
My guess is that its your power distribution box .... not the power supply behind the reels but the box towards the bottom. Not hard to swap so I would try that.

There is a small circuit breaker on top and would check that also.    On the distribution box if u unplug the 6 or 8 pin molex on the top left,that is all you will get is the light so check that connection.




Good Luck
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #12 on: May 20, 2011, 09:36:33 PM »
Looks like this

* IMG_1182.JPG (528.03 KB, 1600x1200 - viewed 335 times.)
Logged
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #13 on: May 20, 2011, 09:41:17 PM »
Quote from: Railroad94 on May 20, 2011, 09:34:17 PM
My guess is that its your power distribution box .... not the power supply behind the reels but the box towards the bottom. Not hard to swap so I would try that.

There is a small circuit breaker on top and would check that also.    On the distribution box if u unplug the 6 or 8 pin molex on the top left,that is all you will get is the light so check that connection.




Good Luck

He swares he has swaped that out already, but what about that circut breaker, what does it do when it is tripped ? How does it reset ?
How can you tell if it has blown ?   Scratch Head
and thanks for that info too.... applause


 waving flag      U.S.Auto Service
        Dan
Logged
waving flag  U.S.Auto Service
      Dan
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #14 on: May 20, 2011, 09:43:08 PM »
Tried putting it in my Big Times... was good.
Logged
WGAS!
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #15 on: May 20, 2011, 09:47:25 PM »
And just a note that slotsx2 forgot to point out here... he is swapping parts from one of his machines that has an enhanced cpu board.
So I am not sure they power supplies are the same  Scratch Head
I do know that he has allmost a whole machine of mine over there swapping and fiddling around till his blood pressure is way up ...



   waving flag  U.S.Auto Service
    Dan
Logged
waving flag  U.S.Auto Service
      Dan
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #16 on: May 20, 2011, 09:56:27 PM »
COMPLetely disconnected the door panel... no change....
Logged
WGAS!
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #17 on: May 20, 2011, 10:01:30 PM »
Quote from: Jim on May 20, 2011, 08:33:45 PM
SOunds as if the power supply is not getting 115vac to it.  you can check any plug that has a orange wire with a black/orange wire =+25vdc. or red wire with a black /red wire +13 vdc.  the +25vdc power all the flor. lamps.[/u]

Get that volt meter back out and check as Jim stated for the +25 and +13 volt. Do you have any???
Logged
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #18 on: May 20, 2011, 10:22:03 PM »
Everything and everyone is pointing toward the lower power supply. I assume you don't have a meter handy, so do this.
Put the power suppy in question in your other machine (Big Times Pay) if it works there then you know its not that part.

     waving flag  U.S.Auto Service
          Dan

p.s. I can see the support you are getting from other NLG members, thanks you guys
Logged
waving flag  U.S.Auto Service
      Dan
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #19 on: May 20, 2011, 10:32:24 PM »
It cant be the power supply. I have 3 power supplys. They all work in my BIG TIMES, none work in my RED/WHITE/BLUE  Scratch Head
I retract that........... they may be working, but the power isn't gettting where it's suppose to go.
Logged
WGAS!
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #20 on: May 20, 2011, 10:35:18 PM »
Quote from: slotsx2 on May 20, 2011, 10:32:24 PM
It cant be the power supply. I have 3 power supplys. They all work in my BIG TIMES, none work in my RED/WHITE/BLUE  Scratch Head
I retract that........... they may be working, but the power isn't gettting where it's suppose to go.

OK!...but do you have the +25 and +13 volts thruout the machine?
Logged
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #21 on: May 20, 2011, 10:38:57 PM »
Clarify last post.
I have 3 power supplys, and 3 power distribution boards that all work in my BIG TIMES.

Yes Dan, these guys are a great bunch of people. There help is very much appreciated!!!!!!
Logged
WGAS!
U.S.AutoService
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 1470
Offline Offline

Gender: Male
Posts: 793


Wild thing !
« Reply #22 on: May 20, 2011, 10:40:33 PM »
Quote from: slotsx2 on May 20, 2011, 10:32:24 PM
It cant be the power supply. I have 3 power supplys. They all work in my BIG TIMES, none work in my RED/WHITE/BLUE  Scratch Head
I retract that........... they may be working, but the power isn't gettting where it's suppose to go.

Jim, it's not the end of the world  (that starts tomorrow)  If I don't get called up to heaven in the morning I will bring over a working machine in my truck and swap your glass and strips and get you a working machine.  So relax, watch some tv, have a beer, help is forth coming.


     waving flag    U.S.Auto Service
         Dan
Logged
waving flag  U.S.Auto Service
      Dan
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #23 on: May 20, 2011, 10:41:24 PM »
I found my volt meter but it doesnt appear to work anymore. It wont even verify my outlets are working in my house........... I stuck my finger in one... they are working Smiley
Logged
WGAS!
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #24 on: May 20, 2011, 10:43:28 PM »
Thats the problem..... I wanna take it with me!

It has to be something simple, problem is finding it..
Logged
WGAS!
Pages: [1] 2 3 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.112 seconds with 20 queries.