Welcome, Guest. Please login or register.
November 22, 2024, 03:34:47 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  Broken leg eprom		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Broken leg eprom  (Read 6180 times)
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« on: June 05, 2011, 05:44:21 AM »
I don't know which topic this should be in ??

Couple of weeks ago I was in Bullhead and broke one of the  legs off of one of Joey's SB eprom. And of course we didn't have a back up file.  I've been giving it some thought, so today I brought the broken chip home with me. The picture tells the whole story, it worked. I had to read the chip 3 or 4 times before I got the point in exactly right place but I'm pretty sure I got a good read.  SB100661 with a check sum of  3DA8

* PICT0424.JPG (1617.86 KB, 2048x1536 - viewed 514 times.)
« Last Edit: June 05, 2011, 05:51:28 AM by Buzz » Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #1 on: June 05, 2011, 05:53:08 AM »
Now you will burn to a blank?
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #2 on: June 05, 2011, 06:03:52 AM »
Quote from: reho33 on June 05, 2011, 05:53:08 AM
Now you will burn to a blank?

Joey has already found a replacement.  I just did this to see if I could, and maybe someday I may need this information that if a leg gets broken all isn't lost.  If a leg gets broken down around the middle I just solder a new leg on and that works very well.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #3 on: June 05, 2011, 08:58:48 AM »
I hate broken legs.

I have ruined 3 or 4 chips. It's very discouraging.

I use a bent screwdriver now. That seems
To do the trick.
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #4 on: June 05, 2011, 05:34:02 PM »
What if it's broken off at the chip surface? Can't fix that. And how is a new leg soldered on? I tried and don't have the proper tools/patience for that.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #5 on: June 05, 2011, 06:09:23 PM »
If you look close at the picture you will see that leg is broken right at the top.  It wasn't a question of repairing the chip, it was a question of reading the chip so I could burn the files into a new one.

A leg that's broken part way down, I have what I call a Donner chip and I break a leg from it as close to top as possible. I use soldering flux on everything, a dab of flux and a dab of solder on the broken leg of the chip your trying to save. ( I should add, the solder heated and stuck to the broken leg) Holding the Donner leg with a pair of pliers hold it where you want it on the receiving chip and touch it with the soldering iron. The solder will flow from one leg to the other and bonding the two together.  That's all there is to it, it doesn't matter that the receiving chips leg is double thickens toward the top.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: June 06, 2011, 12:20:39 AM »
On a pinball website, a guy had a broken leg right at the point where the leg comes out of the body.
What he did was take a very sharp Exacto knife and cut the black chip body around
the broken area and expose a tiny piece of the chip leg inside.
(Think of digging out the soil and rocks over the coal tracks from a fallen miner tunnel )
 well, maybe something lighter than a mining disaster...lol

With the tiniest of the chip body cut away and re-exposing a partial piece of the leg, he was able to
apply some solder flux, a touch of solder adhered to the exposed leg
and from there - a piece of wire was attached.
Doing the same thing Buzz did- he was able to "read" the chips contents and save it to his computer.
« Last Edit: June 06, 2011, 11:38:10 AM by stayouttadabunker » Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #7 on: June 06, 2011, 01:03:43 AM »
Or you could just install ZIF sockets for the chips and no more broken and bent pins.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
tjkeller
NLG Translator
NLG Document, Media Gallery and FAQ Writer
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 374
Offline Offline

Gender: Male
Posts: 703


What???...Where???...Huh???
« Reply #8 on: June 06, 2011, 02:16:16 AM »
Nice work Buzz!   applause
Logged
Thank God for Friends!!!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.096 seconds with 19 queries.