Welcome, Guest. Please login or register.
November 22, 2024, 02:12:28 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  Tracks Keep Burning		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Tracks Keep Burning  (Read 16471 times)
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« on: June 13, 2011, 11:18:37 AM »
Hi,

I have a Wild Cherry S Plus that when I switch it on, It keeps burning the tracks on the Backplain(Mother) Board. I am seriously stumped and have no idea where to go from here. I have replaced the PSU and unplugged everything except the whole friggen machine!!!!!!!!!

Anyone Please help!
Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #1 on: June 13, 2011, 01:13:01 PM »
May I see the burned traces on the motherboard?
I will be able to tell you if that can be repaired or replaced.
I have a feeling your power supply is set for European voltages?
Or the buttons are wired in correctly?
Make sure they're all wired and plugged into the switches the same way.

Open the door, pull out the hopper.
With a multimeter, measure the voltages going to the motherboard Molex.
If you look at it while it's plugged into the motherboard correctly, starting from left to right:
2 orange wires, a brown wire, a blue wire, and 2 green wires.
Set the multimeter at the highest setting, maybe 200Vac.

Stick the black multimeter probe onto the rightmost green wire and the red probe
into the 1st orange wire on the motherboard molex.
You should get a reading of around 12.5Vac.
2nd orange = around 12.5Vac
Brown wire = around 7.5Vac
Blue wire= around 6.5Vac
5th position green wire= nothing.

Now stick the black probe on the 5th position green wire and move the red probe
from the 1st pin to the blue wire and see if you get the same readings.

Let us know what your readings are.
Here's some pictures I took for you to show you how I measured these voltages with the power on.
Here's a couple of ways I measured them>>>

* measuring motherboard 12.5 Vac voltage.jpg (886.4 KB, 2576x1932 - viewed 385 times.)

* measuring motherboard input voltages 003.jpg (853.06 KB, 2576x1932 - viewed 355 times.)
« Last Edit: June 13, 2011, 01:38:10 PM by stayouttadabunker » Logged
Joeylc
Founder and CEO of New_Life_Games_LLC
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 287
Offline Offline

Gender: Male
Posts: 1312


KG7NLG


WWW
« Reply #2 on: June 13, 2011, 01:15:34 PM »
Look at your spin and or bet max sw the light wire is pluged into the cherry sw and not the lamp..

 it's back feeding 5vcc to the board..

Joeylc
Logged
"The Seeds of our Ultimate Destruction are Slowly and Quietly being Planted in the Fertile soil of Political Correctness”
                                                                   Joey Carruthers 2011


Hottest day in the United States recorded August 11, 1983 at 2:21 p.m. was 132 F. - recorded in the shade at the Bullhead City Fire Department. 
BUT IT WAS A DRY HEAT

I Have gone to find myself, and if I get back before I return, keep me here!  ???





1-888-NLG-SLOTS 928-754-4147
e-Bay ID NewLifeGames_net
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: June 13, 2011, 01:39:56 PM »
Yep...Joey could be right too!!!
Them wires in the switches need to be the same way too...
Here's a couple more pics of my power supply readings to the motherboard>>>

* Measuring motherboard input 7Vac voltage.jpg (843.45 KB, 2576x1932 - viewed 382 times.)

* measuring motherboard blue input voltage.jpg (758.53 KB, 2576x1932 - viewed 361 times.)
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #4 on: June 13, 2011, 02:27:48 PM »
Make sure you have the proper size fuses so that they blow first. Then make sure there is nothing under the motherboard (i.e. coins). The with nothing plugged into the motherboard except the power supply cable, start plugging in things until either a fuse blows or something starts smoking. Do not plug the MPU in with power to the machine.

Of course pictures of the traces that are burning would help.
Logged
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« Reply #5 on: June 13, 2011, 02:48:34 PM »
Hi Guys,

Thanks for the help so far, this is what i have:

nothing plugged into the motherboard except power cable, The track on pin 6 burnt first, I repaired, replaced the Power supply and it burnt from pin 6 through to the Jumper For the MPU Switch.

I will take some pics tomorrow and upload.

Hope this info help
Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #6 on: June 13, 2011, 03:04:12 PM »
Quote from: Inieas on June 13, 2011, 02:48:34 PM
nothing plugged into the motherboard except power cable, The track on pin 6 burnt first, I repaired, replaced the Power supply and it burnt from pin 6 through to the Jumper For the MPU Switch.


What jumper for what MPU switch?  Scratch Head
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: June 13, 2011, 04:45:06 PM »
Quote from: Inieas on June 13, 2011, 02:48:34 PM
"...jumper for the MPU switch..."




 arrow  Scratch Head Scratch Head 3 Scratch Head 2 Weird Eyes Huh?


Wow!!!  This is a new one folks...!

1st person who can guess what he's talking about wins a free S2000!  Crazy
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #8 on: June 13, 2011, 04:52:10 PM »
Unless he is talkng about the cable that goes to the MPU cherry switch (if there is one). But he said all the cables were unplugged.  Scratch Head

* mb.jpg (424.99 KB, 1000x750 - viewed 383 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: June 13, 2011, 04:55:45 PM »
That's a rare picture dude!  applause Clap
Thanks for showing us that!  yes
You rarely ever see the MPU cage security Cherry switch, ever!!!
Logged
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« Reply #10 on: June 14, 2011, 03:37:25 AM »
Lol,

I use a jumper to close the security Cage instead of a switch Smiley.
Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« Reply #11 on: June 14, 2011, 03:43:11 AM »
Here are the voltage readings I am getting:

Between Green and Orange : 13.2VAC
Between Green and Orange/Green : 13.2VAC
Between Green and Blue/Brown : 2.3VAC
Between Green and Blue : 3.5VAC
Between Green and Green Pin 5 : 10.8VAC

Between Pin 5 and backwards:

Orange and Pin 5: 23.66VAC
Orange/Green and Pin 5 : 10.62VAC
Blue/Brown and Pin 5 : 10.62VAC
Blue and Pin 5: 8.47VAC
Green and Pin 5: 9.95VAC

I am assuming it is a fault with the power supply? seeing nothing else is plugged in. What could it be though? The Transformer or the CAP over the 220VAC input?

Thanks
« Last Edit: June 14, 2011, 04:06:39 AM by Inieas » Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #12 on: June 14, 2011, 09:42:05 AM »
Quote from: Inieas on June 13, 2011, 02:48:34 PM
and it burnt from pin 6 through to the Jumper For the MPU Switch.

Quote from: Inieas on June 14, 2011, 03:43:11 AM
seeing nothing else is plugged in. What could it be though?

Ok, this is still not making any sense.  banghead What jumper? What switch? And how can it be burning up between pin 6 and them if there is nothing plugged in?  Scratch Head

Below is a motherboard with nothing plugged in. The only thing plugged in should be the power suppy cable on J8. If it is still burning traces with nothing plugged in, check all of the pins on the plugs to see if any are bent and shorting to another. And did you pull the motherboard out and look under it for coins etc?

* mb.jpg (277.31 KB, 1166x602 - viewed 380 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #13 on: June 14, 2011, 11:39:18 AM »
I agree with Poppo.
Something is seriously shorted out.
You're getting almost 24Vac off of pin-5 to orange when it should only be around 12 vac !!!
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #14 on: June 14, 2011, 12:26:26 PM »
Quote from: stayouttadabunker on June 14, 2011, 11:39:18 AM
You're getting almost 24Vac off of pin-5 to orange when it should only be around 12 vac !!!

Clue? Wrong voltage for country???

Quote from: Inieas on June 14, 2011, 03:43:11 AM
... over the 220VAC input?


We really need more info AND PICTURES! And this talk of jumpers and switches is making me  Pull Hair

 Tongue Out
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #15 on: June 14, 2011, 01:52:08 PM »
I agree...the "...jumper for the MPU switch..." has me stumped too.  rotflmao

His voltages readings are all over the map...something is crossed somewhere and I'm still inclined to
believe it's what Joey said earlier about a wire crossed under the button deck.

Crossing a wire there causes all kinds of baloney... Tongue Out
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #16 on: June 14, 2011, 02:05:25 PM »
Quote from: stayouttadabunker on June 14, 2011, 01:52:08 PM
....and I'm still inclined to believe it's what Joey said earlier about a wire crossed under the button deck.

Crossing a wire there causes all kinds of baloney... Tongue Out

BUT, he keeps saying everything is unplugged.  Duh!
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #17 on: June 14, 2011, 02:21:55 PM »
You mean, he's just plugging a power supply into a motherboard...nothing else?
And yet traces are burning off of the motherboard?

That can mean only 1 thing then.
It wouldn't matter if 220volts or 440volts was coming out of the power supply.
There HAS to be a short on the motherboard itself.
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #18 on: June 14, 2011, 02:31:53 PM »
Quote from: stayouttadabunker on June 14, 2011, 02:21:55 PM
You mean, he's just plugging a power supply into a motherboard...nothing else?
And yet traces are burning off of the motherboard?

That's what it sounds like he is saying

Quote from: Inieas on June 13, 2011, 02:48:34 PM
nothing plugged into the motherboard except power cable, The track on pin 6 burnt first, I repaired, replaced the Power supply and it burnt from pin 6 through to the Jumper For the MPU Switch.

But then he talks about a jumper and MPU switch.  Pull Hair
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #19 on: June 14, 2011, 02:53:02 PM »
lol...okay, I'm going to take an un-educated guess at what he means by that.  arrow

I think what he's saying is that the trace ("jumper"?) on the circuit board is
fried from the 6th pin on the white 6-pin J8 header to 31B & 32A pins on the P2 header?
I've seen this particular trace burn off the MB due to incorrect power supply output voltage on that line.
That happens to be a 12Vac line ( orange wire) at the 6th pin position on the J8 header
coming from the power supply and his is shooting out nearly 24Volts according to the readings he posted?!   Tongue Out
Click on photo-shopped photo to enlarge>>>

* possible fried trace on S+ MB.jpg (704.07 KB, 2576x1932 - viewed 415 times.)
« Last Edit: June 14, 2011, 02:58:06 PM by stayouttadabunker » Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #20 on: June 14, 2011, 02:59:04 PM »
Ok, then where is the mystical MPU switch?  Tongue Out

IF the voltage is double, then perhaps he is in a 220v area (per previous quote) and the power supply is strapped for 110v. HOWEVER, if nothing is plugged in, then it still should not be frying any traces regardless how high the voltage is going in.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #21 on: June 14, 2011, 03:01:50 PM »
I agree but it was already fried before he disconnected everything...
which means the there's a short so when he unplugged everything
and turned it back on - other traces went to slot-junkyard heaven... bust gut laughing

Of course - this is all pure assumptions & conjectural Bologna-from-P.A. at the moment... arrow
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #22 on: June 14, 2011, 03:05:13 PM »
Well, I am going to stop guessing until we get some good info and PICTURES.  yes
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #23 on: June 14, 2011, 03:06:19 PM »
lol yeah..
I better get back to work before I get fired.... Cry Laughing
Logged
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #24 on: June 15, 2011, 12:59:22 AM »
Quote from: stayouttadabunker on June 14, 2011, 03:06:19 PM
lol yeah..
I better get back to work before I get fried.... Cry Laughing

Fixed... yes


 wave Tongue Out Crazy rotflmao bust gut laughing
Logged
Thanks,
Bill
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.184 seconds with 19 queries.