Welcome, Guest. Please login or register.
July 06, 2024, 05:04:55 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Machine will not see the door close with 2 different Enhanced MPU's 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Machine will not see the door close with 2 different Enhanced MPU's  (Read 3727 times)
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« on: June 17, 2011, 02:42:31 AM »
I know it is not the optics because the bypass is not working either.
I am suspecting a bad connection, wire,  motherboard, etc else.
When I tried the optic test with the MPU that was in the machine it went to 1 but would not alternate between 1 and 0 like it does normally.
I have not turned the machine back on to see if the problem magically cured itself
I can not do any I/O tests via the firmware until get past the RAM Error.
I think I am going to carefully remove wire ties so I can separate the various harnesses and examine them.
I hope it is not the Power Supply since I get proper lights from MPU and machine boots to the point where I have to clear the RAM error with JP key, attendant button and closing the main door - which it does not see closing.
 
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #1 on: June 17, 2011, 02:51:50 AM »
Foster  I have a enhanced S2000  and the bypass method as you sent me did not work on my enhanced machine. i had to get the optics to work to clear the error . touching the door to the cabnet optics (BRASS TO BRASS) outside fitting of the optics. made the machine clear the door closed error
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #2 on: June 17, 2011, 03:22:02 AM »
I had the bypass working, but I was doing some stuff with the BV and the machine started not seeing the door closed

I am in the process of swapping the motherboard so I can put a 504B in the machine.
IF it works then the problem is with the enhanced MPU's or the enhanced motherboard.
« Last Edit: June 17, 2011, 04:01:01 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #3 on: June 17, 2011, 04:08:48 AM »
I found the problem
One of the Cash Box Door wires was shorted to ground.
I do not know which one.
Problem went away when I removed the inner Chassis of the WBA.
Now to put my Ehhanced stuff back in
Oh I found out whom ever assembles the optics does not solder them
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #4 on: June 17, 2011, 10:53:00 AM »
This is a common problem we have with the enhanced CPU's.

Once it was the backplane and as you noted grounds shorted
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #5 on: June 17, 2011, 02:47:40 PM »
It actaully had nothing to do with the Enhanced MPU, motherboard at all
it was the pinched wire going to the BV cash box door.
I had removed and re-installed the BV inside chassis a couple times wed night.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #6 on: June 17, 2011, 05:58:38 PM »
Quote from: Foster on June 17, 2011, 02:47:40 PM
It actaully had nothing to do with the Enhanced MPU, motherboard at all
it was the pinched wire going to the BV cash box door.
I had removed and re-installed the BV inside chassis a couple times wed night.

agreed, we have been seeing more optic issues on the enhanced over the non. 

One issue was the backplane, other was a grounding issue like you had.
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #7 on: June 17, 2011, 08:04:58 PM »
It took the information displayed on the VFD by 504B that made it clear what was going on.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.123 seconds with 19 queries.