Welcome, Guest. Please login or register.
November 23, 2024, 08:26:14 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  IGT I-Game and Game King.
| | |-+  Bad hopper/harness?
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bad hopper/harness?  (Read 2759 times)
danw
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 39



« on: June 25, 2011, 03:51:28 AM »

When I got my I Game, it had coin equipment installed in it, but the entry was plated off and it was set to coinless.  I removed the plate and filled the hopper with quarters, made some adjustments to the fill sensor, etc, and have it up and running (partially). Every now and then it tells me there was an extra coin paid, and if I cash out, sometimes I get a false coin jam.  Moving the hopper a little fixes the problem.  I am quite sure that the harness is bad on either the machine or the hopper.  Before I start just buying parts, I was wondering if anyone else has seen this and has an easier fix for it.  I noticed on the hopper harness, one pin sticks out about 1/4 an inch longer than the other pins.  I didn't know if that was normal or a problem.  The pin is very tight, so I dont think it wiggled its way out there.  I really dont feel like buying parts I dont need, so any help would be greatly appreciated...
Logged
Firebird
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 243



« Reply #1 on: June 26, 2011, 01:39:41 AM »

sounds to me like the hopper brake spring might be missing, this would cause false coin jam errors and hopper overpays. On the back of the hopper motor is a little lever that runs across the motor underneath it, it has a small hole in it for a spring, right above it is another small hole for the other side of the spring. Look to see if this spring is there, replace if not there.
Logged
ChizzleMonkey
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 89



« Reply #2 on: September 26, 2011, 11:16:12 AM »

If the hopper brake spring is still there, the hopper might need a good cleaning/lubing of the whole brake assembly. Might as well take that whole hopper apart and give it a good cleaning/lube job.  Adjusting the brake spring for more or less tension might fix that as well.
Logged

Keep it simple.
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641



« Reply #3 on: September 26, 2011, 11:47:25 AM »

I hate to tell you folks this, but I have never seen a brake or brake spring on a Game King/I Game/S 2000 hopper.

I have to ask, is moving the hopper clearing the error, or just opening and closing the door clearing the error ??  Next time you get the error just lift the door latch and lower it, see if it clears.
Logged

NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
ChizzleMonkey
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 89



« Reply #4 on: September 27, 2011, 10:06:39 AM »

 Silly Me! OOPS, I thought it was for an S+ hopper. I'll learn how to read one of these days. lol.
Logged

Keep it simple.
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.096 seconds with 20 queries.