Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
Total Karma Storms: 401
Offline
Gender:
Posts: 1819
|
|
« on: December 27, 2008, 10:41:25 AM » |
|
This is from the old site. A rookie mistake.
Author Topic: Fixed no LEDs, now DBV won't work. (Read 421 times) r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Fixed no LEDs, now DBV won't work. « on: December 26, 2007, 08:37:15 AM » The machine was working fine a few days ago. Turned it on and no LEDs or button lights, reels did not lock. Sooo this is what I did.
1. Changed fuses and also checked with meter. -OK 2. Pulled CPU, checked for bent pins on bottom. -None 3. Scraped the second pin from the left on the power harness pins on the mother board. -Nope 4. Changed the power harness from the power supply to the mother board.-Nope. 5. Changed the mother board.-Nope 6. Changed the power supply-Yes
Now the DBV will not light up or work. DBV cycles all the way through. This is what I have tried so far.
1. Set options 6 to 5 cents, options 5,8,9 to 1. And rechecked. 2. Set hopper limit to 300, lower jackpot to 5,998, credit limit 9,997 bill acceptor 9,996. (All from SP1271) 3. Changed cash cans, transporters, SP, power supply (vented type for DBV 200) Red lights on head lights up-Nope 4. Checked bulbs and pulled light board and checked for cracks or burns.-None
What did I forget? hissy fit
<This is an S+> « Last Edit: December 26, 2007, 08:39:06 AM by r273 » Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) Railroad94 Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 156 Offline Offline
Posts: 751
Email Re: Fixed no LEDs, now DBV won't work. « Reply #1 on: December 26, 2007, 09:10:18 AM » What I don't like is having no red led lights on the board , but it sounds like it's just not enabled with the set chip. Report to moderator Logged r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #2 on: December 26, 2007, 09:14:55 AM » Quote from: railroad94 on December 26, 2007, 09:10:18 AM What I don't like is having no red led lights on the board , but it sounds like it's just not enabled with the set chip.
Thats what it looks like but thats the first thing I did and have check it twice. Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) Railroad94 Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 156 Offline Offline
Posts: 751
Email Re: Fixed no LEDs, now DBV won't work. « Reply #3 on: December 26, 2007, 09:22:13 AM » Did you try running any of the test on the bill unit itself. Report to moderator Logged r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #4 on: December 26, 2007, 09:28:24 AM » Quote from: railroad94 on December 26, 2007, 09:22:13 AM Did you try running any of the test on the bill unit itself.
I ran the bill acceptor lights in the output tests, 26 2. They did not work.
I have not changed out the bill unit yet. It lights up so assume it should work.
<Changed out transporter and bill head together from one machine to the next. Now I have 2 machines that the DBV does not work.> « Last Edit: December 26, 2007, 10:38:27 AM by r273 » Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) rickhunter Computer Help 101 Moderator. Sr.Tech NLG Member 1000+ Post *
Members Rating: 486 Online Online
Posts: 4125
There's been excessive spam lately in my Laptop.
Email Re: Fixed no LEDs, now DBV won't work. « Reply #5 on: December 26, 2007, 11:06:04 AM » Is the DBV eprom or flash based. I would try to make sure the eprom is not bad. Also now you say you have 2 machines that don't work? Does the DBV that used to work no longer work on the original machine? I'm thinking bad DBV PS (check voltage output with a meter) on the original non-working machine. Report to moderator Logged Learn something new every day.
r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #6 on: December 26, 2007, 12:47:01 PM » All 3 of my S+ are flash based. The second machine did not work when I put back the original bill validator and the transport. I just re-seated it and it came back. applause The voltage reading is 12.27/8, on both PS. Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) rickhunter Computer Help 101 Moderator. Sr.Tech NLG Member 1000+ Post *
Members Rating: 486 Online Online
Posts: 4125
There's been excessive spam lately in my Laptop.
Email Re: Fixed no LEDs, now DBV won't work. « Reply #7 on: December 26, 2007, 12:56:20 PM » have you run continuity tests on the harness from the bill validator to the mainboard? Report to moderator Logged Learn something new every day.
r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #8 on: December 26, 2007, 01:27:27 PM » I run one from the mother board connector to the PS connector, which was OK.
<Also one from the light bezel to the bill validator (2-wires).> « Last Edit: December 26, 2007, 01:44:33 PM by r273 » Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) Blueridgeslots SLOT SERVICE Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 272 Online Online
Posts: 852
Phone 703 730-0821
Email Re: Fixed no LEDs, now DBV won't work. « Reply #9 on: December 26, 2007, 01:55:30 PM » If you in fact did blow out the head you had from the working game I would check the green wires in the area near the cash box that do or did go to the cash box door micro switch, I have seen these be shorted and blow the lower board on the 200 heads Report to moderator Logged Is a cheap part that is bad or just wrong really inexpensive ? r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #10 on: December 26, 2007, 02:24:19 PM » Quote from: Blueridgeslots on December 26, 2007, 01:55:30 PM If you in fact did blow out the head you had from the working game I would check the green wires in the area near the cash box that do or did go to the cash box door micro switch, I have seen these be shorted and blow the lower board on the 200 heads
These seem OK, so I just change the Bill heads out. They both work in a working machine. When I change transporter and bill head before, it did not work. Must not have seated properly. So there is nothing wrong with both of these. Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) CommTech Contributing Gold NLG Member. NLG Member 101 to 500 Post *
Members Rating: 162 Online Online
Posts: 380
Email Re: Fixed no LEDs, now DBV won't work. « Reply #11 on: December 26, 2007, 07:06:46 PM » So you have changed the DBV power supply ... You have 12 Volts feeding the bill head ... and you have the red LED's on the bill head illuminated, and the transport cycles. OK.. Nothing wrong with the power supply. no
Does the machine work OK with coin-in?
You said that you changed the Motherboard. Is this a known good motherboard that you swapped it with?
Did you try swapping the motherboard back after you changed the main power supply?
Report to moderator Logged r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #12 on: December 26, 2007, 08:52:44 PM » Quote from: CommTech on December 26, 2007, 07:06:46 PM So you have changed the DBV power supply ... You have 12 Volts feeding the bill head ... and you have the red LED's on the bill head illuminated, and the transport cycles. OK.. Nothing wrong with the power supply. no
Does the machine work OK with coin-in?
Yes to all the above.
You said that you changed the Motherboard. Is this a known good motherboard that you swapped it with?
Did you try swapping the motherboard back after you changed the main power supply?
It was a used spare motherboard. I have not tried changing back to the original motherboard. I will try that tomorrow.
Thanks for the suggestion.
Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) Jay Coin-Op Links, Info and Web Sites Moderator. Sr.Tech NLG Member 1000+ Post *
Members Rating: 396 Online Online
Posts: 4222
If you cant afford to lose, you cant afford to win
Email Re: Fixed no LEDs, now DBV won't work. « Reply #13 on: December 26, 2007, 11:54:48 PM » Ron,
I forget the numbers but some games are not the right type for the DBV to work. Ie the DBV is type 21 but the game requires a 22. Check the game that is working and make sure the one that is not does not require a different type. Report to moderator Logged The only way to beat the casino is to own it.
r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #14 on: December 27, 2007, 07:53:23 AM » Jay, These are like my Volcano and Tidal Wave games. Right now I am running Triple Diamond 5-line with the problem I having right now.
Joe, I switched the motherboards. The original one did NOT work. No button lights and no LEDs, no stiffness on the reels. I put back my spare and everything came back EXCEPT the DVB light. Plays fine but no DVB light and it does not take any bills. Now I don't know if it WAS the main PS.
Boy I just love having fun with these machines...when they work. yes
One thing I am learning more and more, I think. rotflmao Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) rickhunter Computer Help 101 Moderator. Sr.Tech NLG Member 1000+ Post *
Members Rating: 486 Online Online
Posts: 4125
There's been excessive spam lately in my Laptop.
Email Re: Fixed no LEDs, now DBV won't work. « Reply #15 on: December 27, 2007, 08:07:06 AM » I would try a RAM Clear. Maybe something is just bad in the config? Report to moderator Logged Learn something new every day.
r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #16 on: December 27, 2007, 12:43:28 PM » Quote from: rickhunter on December 27, 2007, 08:07:06 AM I would try a RAM Clear. Maybe something is just bad in the config?
Nope. no Everything shows it is suppose to be working but it is not? duh Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) Jay Coin-Op Links, Info and Web Sites Moderator. Sr.Tech NLG Member 1000+ Post *
Members Rating: 396 Online Online
Posts: 4222
If you cant afford to lose, you cant afford to win
Email Re: Fixed no LEDs, now DBV won't work. « Reply #17 on: December 27, 2007, 01:22:25 PM » Given that your first problem was power related, and that you have exhausted most other options, I would try swapping power supplies for the DBV - perhaps its just weak or missing one of the line voltages. Ie 12v which causes the power cycling but missing the 5v needed for the electronics..... Report to moderator Logged The only way to beat the casino is to own it.
r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #18 on: December 27, 2007, 01:53:37 PM » I did that too in a previous step. So I just put back the original and no change. Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post *
Members Rating: 264 Offline Offline
Posts: 793
Muffy
Email Re: Fixed no LEDs, now DBV won't work. « Reply #19 on: January 01, 2008, 06:31:36 PM » Update on these posts. Thanks to CommTech reseach of all my posts on this problem, it was he who thought to ask if DBV connector was in J6 on the motherboard. It turns out J6 and J13 (printer connection) have the same connector. So I put them in the RIGHT set of pins and it worked. This lesson was hard learned. yes Report to moderator Logged I'm retired.....my job is having a good time with slots.
e-Bay ID r273 Sr. Rookie member of Rick's SMAA. Keep it Reeeel! or 3***2 (78) Pages: [1] Go Up Print « previous next »
|