Welcome, Guest. Please login or register.
October 31, 2024, 10:33:22 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff
| |-+  Pinball Games
| | |-+  Gorgar Issues		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Gorgar Issues  (Read 4083 times)
Karaoke Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 273
Offline Offline

Gender: Male
Posts: 464
« on: August 12, 2011, 04:49:14 PM »
Hi,
My Gorgar has been kicking my butt. When I got it originally I sent the boards out , psu,sound,mpu and driver. Had them updated and repaired.
Then it was only played here and there for the next few months. After finally giving it a good couple hour playing it burned up 2 soleiods but did not shut down. Replaced the 2 burned soleniods and now I beleive I am having driver issues as it won't boot. My question is,: Is it worth it to upgrade to the Rottendog combo board or just get the boards looked at from who did them originally? I really don't want it to nickel and dime me. Any help is appr. Mike

* IMG_0365.JPG (623.61 KB, 1000x1338 - viewed 528 times.)
Logged


BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #1 on: August 12, 2011, 04:55:43 PM »
from my experience with a black knight pinball, I would bite the bullet and get the upgraded board. Those driver boards for the Williams games have been so hacked through the years, that they are hard to keep up and running.
Logged
Karaoke Mike
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 273
Offline Offline

Gender: Male
Posts: 464
« Reply #2 on: August 12, 2011, 04:56:58 PM »
True, The boards will be worth more than the whole pin. LOL
Logged


slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #3 on: August 13, 2011, 09:30:56 AM »
If it was me I would either sell pin asis or keep a eye out for a working  shuffle  alley for same year we changed boards from them to pins a few time, used to find shuffles working for around 100 bucks in auctions
Logged
putts5205
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 17
« Reply #4 on: October 05, 2011, 01:51:31 AM »
i have a willaims flash and put the rotten dog displays in it. worth every penny. the old master would take a while to "warm up" and eventually would come up. i just recently bought the rotten dog mpu for this game and like the alltek for bally i figured it would be good to have on hand to test other machines. i picked it up on the clearnace/ repair sectionj of jims website for 165. seamed reasonable to me.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: October 05, 2011, 02:02:09 AM »
I've had good and bad rottendog boards...the 1st board I received was so warped I took photographs of it and sent them to the company...they sent me a new board.
However, the replacement board eventually had a header pin failure from a cold solder joint.
It pissed me off so much I wrote back to them again and they sent me another one.
This time I haven't had any problems...uh...yet.
I'm keeping my fingers crossed on this one...
They are NOT cheap boards but use the same old header pin connections which is so outdated.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.074 seconds with 20 queries.