Welcome, Guest. Please login or register.
November 22, 2024, 07:53:12 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Installed Back Lit Reels in the Vison		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Installed Back Lit Reels in the Vison  (Read 6533 times)
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« on: January 02, 2009, 07:00:09 PM »
I just installed backlit reels in the Vision.

They work great even with S+ Triple Cherry SS chip.
Base 1000, Game 363, Version 11GX1

I guess it is normal for the lamps to have a dim glow.

The only thing I hate I have to trim all the backlit style reel strips.

Here are a few  beer beer beer and  cheers for Jim (BlueRidgeSlots)
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #1 on: January 02, 2009, 07:26:22 PM »
Quote from: Foster on January 02, 2009, 07:00:09 PM
I guess it is normal for the lamps to have a dim glow.

Yes....

Did you get much additional/noticeable "buzz" in your speakers/audio?

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #2 on: January 03, 2009, 04:16:49 AM »
Not that I notice, but I do have a resister installed inline with my speakers


I also get to trim my backlit strips to fit the reels.

I guess I will be looking for Base Chips for some of themes I have
Wild Cherry 3 CM
Red,White & Blue Wild 3CM
Red, White Blue 3CM

a few others once I get the glass and determine If I have all the reel strips for a theme.
« Last Edit: January 03, 2009, 07:03:48 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #3 on: January 03, 2009, 12:06:07 PM »
Quote from: Foster on January 03, 2009, 04:16:49 AM
Not that I notice, but I do have a resister installed inline with my speakers


I also get to trim my backlit strips to fit the reels.

I guess I will be looking for Base Chips for some of themes I have
Wild Cherry 3 CM
Red,White & Blue Wild 3CM
Red, White Blue 3CM

a few others once I get the glass and determine If I have all the reel strips for a theme.



I guess you know that this combination (Base 1000, Game 363, Version 11GX1) supports 24 SS game types except tournament chips.

Ron
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #4 on: January 03, 2009, 09:37:09 PM »
They are the grey backed backlit reel strips not the black backed ones.
They are about 1/16" too wide for the back lit reels.
« Last Edit: January 03, 2009, 09:42:32 PM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #5 on: January 04, 2009, 01:38:49 AM »
Quote from: Foster on January 03, 2009, 09:37:09 PM
They are the grey backed backlit reel strips not the black backed ones.
They are about 1/16" too wide for the back lit reels.


I just did one set today. I try to take off about 1/32" as it works best for me. If I take more they are loose fitting,
especially the ends at the laps.

Ron
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #6 on: January 04, 2009, 06:25:14 PM »
Quote from: r273 on January 04, 2009, 01:38:49 AM
Quote from: Foster on January 03, 2009, 09:37:09 PM
They are the grey backed backlit reel strips not the black backed ones.
They are about 1/16" too wide for the back lit reels.


I just did one set today. I try to take off about 1/32" as it works best for me. If I take more they are loose fitting,
especially the ends at the laps.

Ron


That's because the grey backed are not really backlit S2000 reel strips, they are S+ strips.  They should be black on the back.  Also, once you trim them forget about using them in an S+ again.
Logged
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #7 on: January 04, 2009, 09:18:21 PM »
I agree with Jeff about forgetting about putting them back in the S+

... but you can try this ...

Most of the dimple effect from placing the reel strip in the S2000 backlit basket occurs at the cross member holding both sides together (unlike the S+). Trim only at the cross member area.
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #8 on: January 04, 2009, 09:24:27 PM »
Actually, there is another way......... those backlit reel baskets come apart if you pull on them at the cross piece.  You can loosen them up enough so that the strips don't have to be trimmed at all.
Logged
PWRSTROKE
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 246
Offline Offline

Gender: Male
Posts: 1860
« Reply #9 on: January 05, 2009, 01:11:31 AM »
I agree with jeff as I have done this as well as convert s-2000 non-backlit reels to back-lit-(the reels themselves).  Make sure the notches are correct for indexing on the drum/reel baskets.  Thanks B.
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #10 on: January 05, 2009, 08:42:33 AM »
I tried the loosening baskets as you suggested, it works!
I had to remove some plastic welds.
Took me a few minutes for each reel.

Quote from: idesign on January 04, 2009, 09:24:27 PM
Actually, there is another way......... those backlit reel baskets come apart if you pull on them at the cross piece.  You can loosen them up enough so that the strips don't have to be trimmed at all.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #11 on: January 05, 2009, 10:50:51 AM »
Quote from: idesign on January 04, 2009, 06:25:14 PM
Quote from: r273 on January 04, 2009, 01:38:49 AM
Quote from: Foster on January 03, 2009, 09:37:09 PM
They are the grey backed backlit reel strips not the black backed ones.
They are about 1/16" too wide for the back lit reels.


I just did one set today. I try to take off about 1/32" as it works best for me. If I take more they are loose fitting,
especially the ends at the laps.

Ron


That's because the grey backed are not really backlit S2000 reel strips, they are S+ strips.  They should be black on the back.  Also, once you trim them forget about using them in an S+ again.

Actually, there is another way......... those backlit reel baskets come apart if you pull on them at the cross piece.  You can loosen them up enough so that the strips don't have to be trimmed at all. [/quote]

Thanks Idesign for the tips!  applause  I only have one S+ left so I always run my modified strips on my Vision's or S-2000's with backlit reels.

Ron
« Last Edit: January 05, 2009, 11:16:06 AM by r273 » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.097 seconds with 20 queries.