Williams 40X Hand Pay

[dale]

I am trying to get my WMS 40X games to go to hand pay on Jackpot wins only. Where in the menu is this function?  Any help is appreciated. Thanks.

Dale

[Neonkiss]

From the manual on page 2-20
Change the maximum hopper payout to your lowest jackpot in section 7 then in section 8 change the partial hopper pay to zero

Series 7. Maximum Hopper Payout
Initial Display Values: Credit Win Meter Bet
HoPr 4-Digit No. 7
Series 7 selects the maximum number of coins that the hopper dispenses at
once. Series 7 doesn't affect the number of coins paid out for the top award.
Here’s how Series 7 works: A win that equals or exceeds the Maximum
Hopper Payout triggers a hand-pay event. The hand pay equals the
difference between the win and the partial hopper pay amount. (An
attendant must pay the hand pay amount.)
At or above the Maximum Hopper Payout, the GD reacts in either of two
ways...
• In Cash Mode, the machine pays the partial payout amount set at Series
8. Remaining winnings must be hand paid.
• In Credit Mode, the machine increments its Credit Display by the partial
payout amount. Remaining winnings must be hand paid.
Normally, an operator sets Maximum Hopper Payout to accommodate
hopper size. Of course, the machine must never cash out more than hopper
capacity, emptying the hopper. To prevent that situation, the machine
prohibits a credit accumulation beyond the Maximum Hopper Payout.
In Credit Mode...
• If a win exceeds the Maximum Hopper Payout: The hopper provides a
partial payout and a hand pay provides the remainder.
• If a win plus credits on the machine equal or exceed the Maximum
Hopper Payout: The partial pay amount comes out of the hopper.
• If a win plus credits exceed the Maximum Hopper Payout: The hopper
pays the win.
• The slot machine rejects a bill that increases credits up to or beyond the
Maximum Hopper Payout.
The Credit Display indicates the maximum payout setting. The flashing digit
indicates the value to set.
• To increment the flashing digit value, press SPIN REELS.
• To proceed to the next digit, turn the JACKPOT RESET KEY. With each
turn of the key, the flashing digit sequentially advances from right to left.
• To enter Series 8, press the DIAGNOSTIC button.


Series 8. Hopper Partial Payout Limit
Initial Display Values: Credit Win Meter Bet
PArt 4-Digit No. 8
Series 8 selects the partial payout amount during a hand payout or jackpot.
Select “0000� to allow no partial payout. Your choice appears in the Credit
Display.
The Credit Display indicates the current partial payout amount. The flashing
digit indicates the value to set.
• To change the flashing digit value, press SPIN REELS.
• To proceed to the next digit, turn the JACKPOT RESET KEY. With each
turn of the key, the flashing digit sequentially advances from right to left.
• To enter Series 9, press the DIAGNOSTIC button.
In a hand payout situation, the candle flashes and the machine dispenses
the allowed payout. The Credit Display indicates the amount dispensed. The
Win Meter Display indicates the amount to be hand paid.

[dale]

Thanks, I had a feeling this was it but I didn't understand the part about not affecting the top award. Sometimes when it is simple I can make it difficult!