Welcome, Guest. Please login or register.
November 22, 2024, 07:07:27 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  S+ - Not booting to LED on front panel - no spinning reels		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S+ - Not booting to LED on front panel - no spinning reels  (Read 6272 times)
teamclark4
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 119
Offline Offline

Gender: Male
Posts: 136
« on: January 04, 2009, 11:29:31 PM »
Have a Hot Peppers machine... It "was" working before i bought it and moved it home.  Now when i plug it in I have all the lights lighting up, the DBV whirring ( and then stopping after 15 secs); but i never get anything on the LED in the front; and the reels don't do the initial spin thing.  I also have a Triple Double Diamond next to it that boots up fine.

So even though all the fuses looked ok; i swapped the 3 between the working machine and non-working. Nothing

I pulled the motherboard and reseated it. Nothing

I meticulously verified that everything is properly plugged in.  It's as if something came unplugged in-transit but i definately don't see it.

If i take the motherboard out and turn on the machine; everything lights up the same as when it's in (except of course for the LED's on the front panel)... This leads me to believe that there is a problem with the motherboard, either power or something.

Because i have no LED in front; when i push the "self-test" button of course i don't see anything and can't do anything.

Any ideas ?
Logged
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #1 on: January 04, 2009, 11:54:24 PM »
Hello!

Are the reels "stiff" when the machine is on or do they move freely just like when the machine is off?

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #2 on: January 05, 2009, 12:08:48 AM »
...and if the answer is "they move freely," start reading here on a very recent thread -- it's likely the power connector described in that thread.   propeller
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
teamclark4
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 119
Offline Offline

Gender: Male
Posts: 136
« Reply #3 on: January 05, 2009, 12:21:06 AM »
They move freely.... i'll get into that thread now..
Logged
teamclark4
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 119
Offline Offline

Gender: Male
Posts: 136
« Reply #4 on: January 05, 2009, 02:34:04 AM »
It looks like i have a power supply issue..........

I wasn't getting good readings on that 6 pin power supply to the CPU board.  So I swapped out that power connector from a working machine and it still didn't work.  I replaced all the fuses and it still didn't work..

Then i rigged up a 6 foot "extender" to go from the "good" machine 6 pin molex (out of the power supply) into the "bad machines" molex connector... So basically when i turn the power on the "bad" machine, everything is powered except the CPU board.. Then i turn on the "good" machine and it gets power to the bad machine CPU... So i have LED's now on the bad machine and can play it..  Of course this 6 foot mass of wires isn't going to work in the long run.

It looks like i'm looking on ebay for a power supply; unless someone here has a spare for sale....

Thanks..
Logged
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #5 on: January 05, 2009, 02:47:56 AM »
Hello!

You might want to remove the bad power supply from the machine and open it up to make sure there are no loose coins in there.  When machines get moved, it is common for a loose coin to get lodged where it shouldn't.  Sometimes just finding and removing a coin will solve all the problems.  Worth a look anyway Smiley

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
teamclark4
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 119
Offline Offline

Gender: Male
Posts: 136
« Reply #6 on: January 05, 2009, 04:40:00 AM »
Thanks for pointing me in the right direction Dan....

I did take the top part of the power supply off and looked down in there to see if i could see anything wrong.  I guess the next step is to take the whole thing out like you're saying since i would have to do that anyway to replace it....

thanks.
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #7 on: January 05, 2009, 06:45:19 AM »
Quote from: teamclark4 on January 05, 2009, 02:34:04 AM
It looks like i'm looking on ebay for a power supply; unless someone here has a spare for sale....

Check with the vendors at the top of this page -- I'm sure one of them will have an S+ power supply for you at a reasonable price.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
idylewild1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 140
Offline Offline

Gender: Male
Posts: 591



WWW
« Reply #8 on: January 05, 2009, 12:36:23 PM »
I have several S+ power supplies if needed. They are $24.00 plus shipping. Let me know if I can help.
Logged
idylewild1

http://samronslots.com/
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #9 on: January 10, 2009, 02:01:33 AM »
before you spend your money----after u take the ps out take the one screw that holds the back plate in place and give the transformer area a good visiual,make sure all the push on connectors are tight------ inspect around the line filter make sure those connections are tight--- then inspect the fuse housings make sure those are good and also look for loose or unusual looking connections----make sure fuses are the right amperage as posted on the front (sometimes people put higher rated fuses in the holder and it gets hot and becomes unstable, last but not least check the connections on the black bus block. hopefully u will find something out of line-----being that the machine did work and all that u did  was move it.  then if all else fails go to plan b.

jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
teamclark4
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 119
Offline Offline

Gender: Male
Posts: 136
« Reply #10 on: January 10, 2009, 02:03:22 AM »
Thanks Jim i'll check that out.. I had done a quick visual inside the power supply, but i could definately give it a thorough go thru again.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 20 queries.