Welcome, Guest. Please login or register.
June 29, 2024, 02:30:34 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Ok so i got a bit of info, now i just need some help please.		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Ok so i got a bit of info, now i just need some help please.  (Read 5761 times)
Oddzball
Guest
« on: September 05, 2011, 10:51:35 PM »
So, haven't heard much from my other post, but i figured out that I'm actually missing the "MPU" for my slot machine. Which pretty much tells me exactly why its not working I suppose. Slot repair place told me to get in touch with Foxsslots from ebay. So I sent him an email, then realized that he was the same fellow who posts on these boards. Small world huh? Judging from Fox's ebay listings I don't think he will have an MPU available though. Again, tag on the machine says E-1096, but the IO board on the inside says E-809.

Now I've spent about 4 days digging around on the internet trying to find a replacement mpu with pretty much no luck. I could really use some help, if anyone has some contacts or ideas please post them.

If I cant find the pieces.. well i guess i have a bunch of parts for a slot machine for sale. But I really wouldn't want it to come to that.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #1 on: September 05, 2011, 10:53:17 PM »
Can you post a picture of your machine and the board up here?
I personally do not know what that board is for really.
My guess is that it's for a Bally machine but there are several models.
Posting a photo of these will help you a lot!
Logged
Oddzball
Guest
« Reply #2 on: September 05, 2011, 10:55:20 PM »
Sure, im not so great with the computer stuff all the time, but I will try. (Like i want to edit my profile here, but I'll be darned if I can figure out how)
Logged
Oddzball
Guest
« Reply #3 on: September 05, 2011, 11:01:54 PM »
A few pictures..

* 2011-09-05_17-56-26_302.jpg (1096.37 KB, 3264x1836 - viewed 283 times.)

* 2011-09-05_17-56-43_413.jpg (1015.78 KB, 3264x1836 - viewed 308 times.)
Logged
Oddzball
Guest
« Reply #4 on: September 05, 2011, 11:03:49 PM »
And some more..

* 2011-09-05_17-57-11_556.jpg (886.71 KB, 3264x1836 - viewed 284 times.)

* 2011-09-05_17-57-20_636.jpg (834.46 KB, 3264x1836 - viewed 280 times.)
Logged
Oddzball
Guest
« Reply #5 on: September 05, 2011, 11:05:08 PM »
final pics

* 2011-09-05_17-58-30_656.jpg (1190.79 KB, 3264x1836 - viewed 255 times.)

* 2011-09-05_17-57-38_309.jpg (1574.86 KB, 3264x1836 - viewed 249 times.)
Logged
Oddzball
Guest
« Reply #6 on: September 05, 2011, 11:10:36 PM »
And on more. Missing the cpu board that goes on the left side im guessing?

* 2011-09-05_18-09-32_235.jpg (1217.21 KB, 3264x1836 - viewed 284 times.)
Logged
Oddzball
Guest
« Reply #7 on: September 05, 2011, 11:42:17 PM »
Did these pictures help? Thanks.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #8 on: September 05, 2011, 11:53:22 PM »
WOW! An oldie but goldie!  applause Clap
I'm pretty much an IGT guy but the Bally guys will chime in here soon.
They're just a bit slower than us IGT guys!  Crazy rotflmao  stir the pot / get cooking
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #9 on: September 06, 2011, 01:25:49 AM »
Quote from: stayouttadabunker on September 05, 2011, 11:53:22 PM
WOW! An oldie but goldie!  applause Clap
I'm pretty much an IGT guy but the Bally guys will chime in here soon.
They're just a bit slower than us IGT guys!  Crazy rotflmao  stir the pot / get cooking
.
I resemble that remark,   Crazy arrow    but I was in the garage working on my newest Bally EM...The machine does look complete except for the missing MPU. The ribbon cable from the I/O is still there, they just have the MPU end of the ribbon cable attached to the right side of the I/O, my guess to keep it from getting damaged.. It looks like the ribbon cable for the door meter is still there as well as the mounting bracket for the MPU. It should not be that hard to find a good MPU, I know that I have a few extras from machines I've parted out, and could part with one, but locating the correct eproms might be a problem. That's where I would hope that Barry at Foxsslots could help.
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Oddzball
Guest
« Reply #10 on: September 06, 2011, 02:08:01 AM »
Awesome, how do we setup getting the board from you? Also I need to get in touch with Fox/Barry for eproms. Hope i can sort this out rather then scrap it and start all over again.  applause
Logged
Oddzball
Guest
« Reply #11 on: September 09, 2011, 10:09:13 PM »
Hi guys, just wanted to let you know I got  in touch with Barry and sent him the information to hopefully get me my eproms and MPU, or at the very least the eproms needed. Hope all goes well.
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #12 on: September 10, 2011, 12:32:52 AM »
Good to hear Oddzball, it would be a shame to see that machine scrapped or used for part. Looks like it's in nice shape.. Like I said I have a couple extra MPU's and I'd be willing to sell one if you can find the eproms you need..
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Oddzball
Guest
« Reply #13 on: September 10, 2011, 01:10:47 AM »
Well even if Barry is unable to assist in the matter, I figure I'll make out ahead in parts value if I have to. From what I understand from talking to him the eproms are specific to the machine, so I dont know if that makes it extremely difficult to find the right one.
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #14 on: September 10, 2011, 01:41:33 AM »
Quote from: Oddzball on September 10, 2011, 01:10:47 AM
Well even if Barry is unable to assist in the matter, I figure I'll make out ahead in parts value if I have to. From what I understand from talking to him the eproms are specific to the machine, so I dont know if that makes it extremely difficult to find the right one.

Well if anyone can help you with this issue he can.. I would think that over the years that he has worked on the machines, he would have a set for just about any of the Bally's, or at least the files on them.. Give him time to check on it, I hear he's still move his shop from Florida to Boston..
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 19 queries.