Welcome, Guest. Please login or register.
November 22, 2024, 02:04:19 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  IGT AVP 3.0 help		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: IGT AVP 3.0 help  (Read 10641 times)
sloggernobber
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 6
« on: September 22, 2011, 07:23:13 PM »
This is my first post so please take it easy on me.
I have an IGT AVP 3.0 running with sas and am trying to clear 2 messages on the screen. The messages are;
1) Terminal disabled by host.
2) Validation buffer full.
I have enabled the game within the sas system but to no avail.
Do you guys know how I can clear the 'validation buffer full' error?
Thanks,
Nigel
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #1 on: September 22, 2011, 07:40:47 PM »
Welcome to the site!

 NLG Welcome

Not a lot of us have access to AVP machines.  You may get a better response if you post over on http://www.SlotTechForum.com/ -- that site has more active casino techs (our site is more geared towards home users, although some active techs post here, too).

Best of luck, and please let us know what the solution was once you figure it out!  yes
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
sloggernobber
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 6
« Reply #2 on: September 22, 2011, 07:51:03 PM »
Thanks for the advice. I will check it out and when I have the fix I will post it here.
Cheers.
Logged
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113
« Reply #3 on: September 22, 2011, 08:12:13 PM »
What cabinet is it?

Your machine is not talking to your system. Verify all SAS settings and check the harness from your system to your machine.
Also check the comms IF card relevant to what you are using.
Logged
sloggernobber
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 6
« Reply #4 on: September 22, 2011, 08:19:26 PM »
The machine is a 96499203 19" Trimline AVP Upright. The sas cable is the fibre optic to RS232 which is good as I have tried it on another machine. I have a feeling that there is some setting hiding on the sas that is the culprit.
Logged
morning_glory21
Guest
« Reply #5 on: September 23, 2011, 05:14:39 AM »
Quote from: TZtech on September 22, 2011, 08:12:13 PM
What cabinet is it?

Your machine is not talking to your system. Verify all SAS settings and check the harness from your system to your machine.
Also check the comms IF card relevant to what you are using.

i think TZtech is more interested in the 2.0, 2.5, 3.0 version of brainbox.  i remember reading a post on the slot tech forum about the comm port settings and i'm sure the ports can go bad  loser maybe try a different port just to eliminate the possibility.  yes good luck!!  propeller
Logged
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #6 on: September 23, 2011, 08:25:13 AM »
Quote from: sloggernobber on September 22, 2011, 07:23:13 PM
This is my first post so please take it easy on me.
I have an IGT AVP 3.0 running with sas and am trying to clear 2 messages on the screen. The messages are;
1) Terminal disabled by host.
2) Validation buffer full.
I have enabled the game within the sas system but to no avail.
Do you guys know how I can clear the 'validation buffer full' error?
Thanks,
Nigel

you get those messages when the machine is not receiveing the poll from your host.

once the buffer is full and host is not reading them the machines will disable. (my igames do the same thing, but only show disabled by host) when i turn off my host and then try to play a few games
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.104 seconds with 20 queries.