Welcome, Guest. Please login or register.
November 22, 2024, 10:06:31 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally Alpha Diagnostic Question...... 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally Alpha Diagnostic Question......  (Read 9291 times)
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« on: October 19, 2011, 09:14:47 PM »
Getting Mechanical Reels Not Configured error message.

Machine is dead in the water. It powers up completely, but does nothing. No bet or spin buttons light up, no bill validator lights up, but I can hear it power up..... Anyone out there know anything about an Alpha yet? This happened because I brushed a reel with my arm while I had the reel glass open and spun the reels trying to find a noise, and sent the machine into reel tilt! They spin fine when you start the machine up, but that's as far as it will go! You can calibrate the reels, but that doesn't help at all...

JR
Logged
WGAS!
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #1 on: October 19, 2011, 09:22:56 PM »
I wish I knew something about them but I don't know crap.
Jim @ Bettor Slots should be able to help you since he had some that he sold.
Logged
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #2 on: October 20, 2011, 02:19:55 PM »
I called Bally and was told it was RCU board, REEL CONTROL UNIT.
Good Luck getting that.......... Silly Me!

Any offers???
Logged
WGAS!
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #3 on: October 20, 2011, 05:47:25 PM »
WOW, found the RCU board!  Clap
Pricey, but not a lot of Alpha parts out there. Got VERY lucky!!
Thanks NLG!!
Logged
WGAS!
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #4 on: October 20, 2011, 06:11:34 PM »
 Clap Clap That was quick. Hope it gets you up & running.
Logged
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #5 on: October 26, 2011, 03:23:00 PM »
That was $100 wasted!!!
Thanks Bally!

Trash runs on Monday.............
Logged
WGAS!
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #6 on: October 26, 2011, 03:30:39 PM »
Quote from: slotsx2 on October 26, 2011, 03:23:00 PM
That was $100 wasted!!!
Thanks Bally!

Trash runs on Monday.............

That sucks. Wish I knew something about them to help.
Did you try Jim @ Bettor Slots?
Ford
Logged
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #7 on: October 26, 2011, 03:45:30 PM »
Yep, he didn't know....
Logged
WGAS!
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #8 on: October 26, 2011, 03:50:38 PM »
How about Jim @ Blue Ridge Slots? He's pretty sharp.
Logged
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #9 on: October 26, 2011, 03:58:44 PM »
N0 comment......
Logged
WGAS!
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #10 on: October 26, 2011, 04:01:05 PM »
Did you check with whoever you got it from?
Just a thought. Would like to see you get it going.
Logged
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #11 on: October 26, 2011, 04:21:41 PM »
He didnt know either........ I don't have any options except to put it into cold storage till more people get them and learn something about them.
Logged
WGAS!
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113
« Reply #12 on: October 26, 2011, 07:34:35 PM »
Clearing reel tilts of these is a bitch. In your error messages do you get a tilt for specific reel or just a general reel tilt error ? We have had a few go down where it was the actual reel unit which has a controller board on the unit (found a schematic for this board in the EVO manual but have not yet investigated what is failing). Try swapping out reels to see if problem follows any specific reel. If that does not help I am back at work on Friday and will post more detailed test instructions. Apart from the reel tilt issue these machines are pretty solid
Logged
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #13 on: October 26, 2011, 08:48:09 PM »
MECHANICAL REELS NOT CONFIGURED

Aside from the reels spinning up on boot up, the reels and machine is DEAD after I get the above error message!

I called Bally and was told it was RCU board, REEL CONTROL UNIT.

$110 wasted!!!

And the guy I got that card from, now says it's the reels..... waiting on price for those!
« Last Edit: October 26, 2011, 08:54:50 PM by slotsx2 » Logged
WGAS!
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #14 on: October 27, 2011, 07:20:43 PM »
I know Jim (Blueridgeslots) had a bunch of reels and boards in stock for those.

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #15 on: October 27, 2011, 11:41:46 PM »
I had this problem pop up on a couple of machines after clearing and setting up the game.  In one case it was a matter of changing out a particular reel controller board....but in two other cases the solution was to go to Diagnostics....Game...then touch the "Calibrate Reels" button...sometimes I had to do it twice and it worked after that.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #16 on: October 28, 2011, 09:39:37 PM »
Every since I bought this machine the reels have grunted badly. and I do mean loudly.
I can calibrate the reels all day long, doesnt help.......
Logged
WGAS!
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #17 on: November 06, 2011, 07:18:40 PM »
The latest thing going on with my Bally Alpha S9000........
Watch and LISTEN as I turn the beast on!!

The video was too large in size so I had to shrink it. If you look CLOSELY  you can see the MPU lights flashing on and off....
* myalpha.wmv (988.29 KB - downloaded 189 times.)
« Last Edit: November 06, 2011, 07:23:42 PM by slotsx2 » Logged
WGAS!
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #18 on: November 07, 2011, 01:12:39 AM »
The sound of the reels cycling is normal.  The solenoid clicking and intermittent lights suggest to me that the power supply on the MPU board is bad.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
slotsx2
JR
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: -37
Offline Offline

Gender: Male
Posts: 596
« Reply #19 on: November 07, 2011, 01:17:10 AM »
see other post about power supplys
Logged
WGAS!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.133 seconds with 21 queries.