Welcome, Guest. Please login or register.
November 22, 2024, 05:30:41 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally E-Series Code 41		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally E-Series Code 41  (Read 3687 times)
mavrik8511
Guest
« on: October 26, 2011, 07:54:28 PM »
I have an E-2209 that gives me a 41 code after the arm has been pulled. The reels dont lock. If I run the reader test, all of the readers are working correctly. If I remove the reels and cycle the machine, it works perfectly (not sure if this has anything to do with it). So does anyone have any idea what the problem could be??

Thanks,
Maverick
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #1 on: October 26, 2011, 09:33:34 PM »
Check you kick & arm switches.

* Untitled5.jpg (507.08 KB, 1704x2192 - viewed 404 times.)
Logged
One step at a time.
DCM1519
New NLG Member 1 to 100 Post
**

Total Karma Storms: 8
Offline Offline

Gender: Male
Posts: 59
« Reply #2 on: October 27, 2011, 03:23:39 AM »
Is the gap between the reel reader and the reel set to about 1/16th inch on the left side.  I had the same problem and was told about this and this site.  Mine was off and correcting the gap fixed the problem.
Logged
mavrik8511
Guest
« Reply #3 on: October 27, 2011, 01:34:03 PM »
I checked the cam switches and they seem to be working fine. If they were the problem, wouldnt I get the 41 code even when the reels are removed?

Tried adjusting the readers and that doesnt seem to work either.
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #4 on: October 27, 2011, 01:42:33 PM »
Try moving the number 1 reader to the 2nd or 3rd position to see if the code changes. 42 would be bad reader in second position. 43 would be the third one. If it moves the reel reader has to be repaired.

Gary
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
mavrik8511
Guest
« Reply #5 on: October 27, 2011, 07:51:54 PM »
OK......I finally figured this out. Apparently the number 1 reel was not spinning fast enough! I took apart the reels and lubed the bearings. Put it all back together and made sure it had a cool spin on it...an VOILA!!! No more 41 code. Now it just wont pay-out!!!
Thanks everyone for the help!!!


Maverick
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #6 on: October 27, 2011, 09:29:50 PM »
Glad you were able to figure it out. Check to see if your hopper motor and gear box spin freely and check the fuse on the hopper. Its possible that you could have a bad hopper control board. Check the large round diodes on the top of the control board number 11 & 12 i think. They dry out and will crack causing the board to fail. The other thing is that the mac15 or is it the Mac16 trac on the top of the board also go bad.  Can you do any of the machine tests using the buttons on the hopper board?
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
mavrik8511
Guest
« Reply #7 on: October 28, 2011, 12:26:49 AM »
Yep....I can run all of the tests from the board! I can run the hopper test and it will just sit there until throwing the "Hopper Empty" error code. But I can manually trip the relay 10 times and it doesnt error.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.09 seconds with 19 queries.