Welcome, Guest. Please login or register.
November 22, 2024, 09:56:36 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  Williams BB2 model, with OLED comm failure. 		0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Williams BB2 model, with OLED comm failure.  (Read 17109 times)
woilly
Guest
« on: November 02, 2011, 02:57:09 PM »
Hi,

Anyone have a clue on what could be the problem on BB2 with OLED comm failure ... (intermitent problem)
The USB cable have been changed and the problem is on the oled panel. Main CPU ok.

Any schematics for the oled panel board or part on board to change to sove the problem.

thanks   
Logged
Gunnerbill
New NLG Member 1 to 100 Post
**

Total Karma Storms: 9
Offline Offline

Posts: 74
« Reply #1 on: November 11, 2011, 12:00:41 AM »
First use the software to test the OLED deck. Test each Module one at a time, the easyiest problem could be the the deck has lost or has corrupt data. Solution reload data. OS's 14xx & below will use firmware 2.03, OS's 16xx will use firmware 3.02 or 3.03.

Other problem could be the Cap on the bottom of the board is bad or has loose connection 
Logged
woilly
Guest
« Reply #2 on: November 11, 2011, 01:23:18 PM »
Quote from: Gunnerbill on November 11, 2011, 12:00:41 AM
First use the software to test the OLED deck. Test each Module one at a time, the easyiest problem could be the the deck has lost or has corrupt data. Solution reload data. OS's 14xx & below will use firmware 2.03, OS's 16xx will use firmware 3.02 or 3.03.

Other problem could be the Cap on the bottom of the board is bad or has loose connection 


Hi witch software your using? Do you mean to test it plugged into machine or bench test?
thx
Logged
Gunnerbill
New NLG Member 1 to 100 Post
**

Total Karma Storms: 9
Offline Offline

Posts: 74
« Reply #3 on: November 11, 2011, 02:04:55 PM »
The software that I am talking about is the software that loads the firmware to the OLED deck. it is easier to load the firmware or test in the machine. It doesnt really matter, just as long as you have power to the OLED Deck.

I do know that these deck are very fussy. They do not like abuse. They do not like any type or water or drink spills. You can also try and take the board apart, Look at the actuator and springs. and clean all the contacts.
Logged
Gunnerbill
New NLG Member 1 to 100 Post
**

Total Karma Storms: 9
Offline Offline

Posts: 74
« Reply #4 on: November 11, 2011, 02:08:11 PM »
The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06
Logged
woilly
Guest
« Reply #5 on: November 11, 2011, 02:35:58 PM »
Thank you very much....i will get the software ... so it will be easier to test it on bench....
If i find the problem i will post the solution...
Thx
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #6 on: November 11, 2011, 04:22:48 PM »
Quote from: Gunnerbill on November 11, 2011, 02:08:11 PM
The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06
3.07 is the latest avail
Logged
woilly
Guest
« Reply #7 on: November 12, 2011, 12:30:05 PM »
Quote from: Slotmaster on November 11, 2011, 04:22:48 PM
Quote from: Gunnerbill on November 11, 2011, 02:08:11 PM
The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06
3.07 is the latest avail

Hi,  I tried and tried,,,, and i can't find any working link to download the soft. Do you know where i can get it?
thank you.
Logged
woilly
Guest
« Reply #8 on: November 12, 2011, 01:52:20 PM »
Quote from: woilly on November 12, 2011, 12:30:05 PM
Quote from: Slotmaster on November 11, 2011, 04:22:48 PM
Quote from: Gunnerbill on November 11, 2011, 02:08:11 PM
The software is called WMS USB Test Comm Tool setup, and I think it is at version 3.06
3.07 is the latest avail

Hi,  I tried and tried,,,, and i can't find any working link to download the soft. Do you know where i can get it?
thank you.

FORGET IT... i found it... i will install it it in the next 2 min..
thx anyway.. 
Logged
woilly
Guest
« Reply #9 on: November 12, 2011, 02:45:53 PM »
Hi SlotMaster,  Thank you very much. I have tested the panel i have with the software (WMS USB Test Comm Tool setup) and reload the Firmware into the OLED Deck panel and buttons.

Problem is solved!  thank you very much for you help.
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #10 on: November 12, 2011, 05:31:39 PM »
COOL! Another problem solved! NLG's great Members to the rescue again!!! yes propeller yes wave  +1 (Karma, or whatever) to everyone here for helping, and being helped! (Woilly needed his first +1) Clap Clap Clap

CaptainHappy CaptainHappy
NLG ADMINISTRATOR
Logged
  Come sail away, Come sail away Come sail away with me..
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #11 on: November 12, 2011, 10:13:10 PM »
I gave karmas to woilly & slotmaster!
You get nothing CH... bust gut laughing
Logged
Gunnerbill
New NLG Member 1 to 100 Post
**

Total Karma Storms: 9
Offline Offline

Posts: 74
« Reply #12 on: November 13, 2011, 11:13:25 PM »
Wow !!! I get no mention :-(
Logged
superparts
**************** SLOT PARTS FOR SALE ****************
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 33
« Reply #13 on: November 17, 2011, 09:11:25 PM »
I am glad to see you were able to get the buttons back up and running.
Logged
i have parts for:

 Atronic Emotion:
Comm, backplane, Main, Multi media boards and button decks.

WMS BB N BB2
NXT2 & NXT CPUs, BB2 backplane, OLED decks.

Aristocrat Veridian
CPU, Backplane, powersupply.
PM Or EMAIL preferably:  superparts1@gmail.com
david1820
Guest
« Reply #14 on: December 17, 2011, 11:37:01 PM »
Hi, im new on this forum, where can download WMS USB Test Comm Tool 3.07 please i need your help, thanks.
Logged
woilly
Guest
« Reply #15 on: December 18, 2011, 12:01:30 AM »
You can get it on the wms  web site.
Mr.Woilly
Logged
david1820
Guest
« Reply #16 on: December 18, 2011, 01:48:42 AM »
Thanks for your help but i can`t find the software, please help me whit a link.
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #17 on: December 18, 2011, 12:28:22 PM »
you need an account first etc. 

Logged
kforeman
Today...Slot Tech Tomorrow...Still be a Tech
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 42
Offline Offline

Gender: Male
Posts: 378
« Reply #18 on: December 18, 2011, 07:23:37 PM »
this should be it!  lightning bolt

https://secure.wms.com/wmssecure/main.asp
Logged
Now You're Techin'!!!
ChizzleMonkey
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 89
« Reply #19 on: December 19, 2011, 11:54:36 AM »
In case the above posts do not fix the communication issue with your button panel, you should also try to replace the usb controller chip at U6 on the board. Where firmware upload has failed, this has fixed others. Install a new U6 and reinstall the firmware using the afore mentioned tool.
Logged
Keep it simple.
jim7
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Posts: 4
« Reply #20 on: January 12, 2012, 12:23:11 AM »
<deleted by mod>

Thank you
« Last Edit: January 12, 2012, 05:16:17 PM by channelmaniac » Logged
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #21 on: January 12, 2012, 05:17:32 PM »
We do not condone giving/receiving/asking/paying/buying/selling/anything to do with copyrighted software.

If it's an original CD or EPROM/ROM/PROM that is different.

Please do not ask for software on the forum again.
Logged
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
jim7
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Posts: 4
« Reply #22 on: January 12, 2012, 06:51:50 PM »
I AM SO SORRY I DID NOT KNOW ITS COPYRIGHTED
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.117 seconds with 20 queries.