Welcome, Guest. Please login or register.
November 22, 2024, 07:54:36 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  what dies in an S + power supply?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: what dies in an S + power supply?  (Read 4935 times)
CYRIL1973
NLG Member 101 to 500 Post
***

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 255
« on: November 13, 2011, 05:13:21 PM »
Hi,

I have got 2 non working S + power supplies.  When I swapped them with a good known one, the machines work properly.

I checked the non working ones and apart from the 4 fuses ( 3 at the front and one inside) which I tested, they still did not work. What could be tested next? Do transformers die?

Feel free to tell me what you be defective.

Thanks a lot.
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #1 on: November 13, 2011, 06:08:19 PM »
Try swapping the fuse holder caps.  If the trasformer died, you would most likely smell it.
Logged
CYRIL1973
NLG Member 101 to 500 Post
***

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 255
« Reply #2 on: November 13, 2011, 06:26:34 PM »
Thanks for chiming in.

I tested the fuses from a working power supply but it still did not work.

Cyril
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #3 on: November 13, 2011, 06:30:26 PM »
Quote from: CYRIL1973 on November 13, 2011, 06:26:34 PM
Thanks for chiming in.

I tested the fuses from a working power supply but it still did not work.

Cyril

But did you swap the fuse holder caps too? If they are bad (and they do go bad), it doesn't matter if the fuses are good.
Logged
CYRIL1973
NLG Member 101 to 500 Post
***

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 255
« Reply #4 on: November 13, 2011, 06:38:49 PM »
I took the fuses out of the working power supply with their holders and put them in the other two power supplies but to no avail. Only the lights come as well as the BV which cycles.
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #5 on: November 13, 2011, 06:51:09 PM »
Are you swapping the cable that goes to the motherboard too? Do the ones that don't work look burnt?

See these threads
http://newlifegames.net/nlg/index.php?topic=9367.0
http://newlifegames.net/nlg/index.php?topic=4078.0
Logged
CYRIL1973
NLG Member 101 to 500 Post
***

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 255
« Reply #6 on: November 13, 2011, 06:54:07 PM »
This cable is ok because when  it is plugged to a known good power supply the machine works properly...
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #7 on: November 13, 2011, 07:00:51 PM »
Just for grins, take a look at it and re-seat it on the motherboard side. They can be intermittent if burnt.

Also if you have a meter, I would check those fuse holders for continuity on the inside of the power supply (with the machine unplugged of course). There just is not much to go wrong with the PS.

Did they ever work? Are they wired for the proper input voltage (i.e. 115v not 220v)?

You can also check the individual secondy voltages.

* ps.jpg (65.66 KB, 355x423 - viewed 302 times.)
Logged
CYRIL1973
NLG Member 101 to 500 Post
***

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 255
« Reply #8 on: November 13, 2011, 07:07:50 PM »
Thanks for helping, I will have a look tomorrow morning and let you know.

Good night ( it's 10:07 PM here)
Logged
brianfink
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 348
« Reply #9 on: November 20, 2011, 05:57:15 PM »
I have had a couple of power supplys that had the line filter go out. They only cost a few bucks and are easy to replace. I really dont know how to test a line filter but they are pritty easy to swap with one you know is good.
Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #10 on: November 20, 2011, 10:02:47 PM »
same here - the filter was no good
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.105 seconds with 19 queries.