IGT S-plus replacement laminate sides

[harryr]

Does anyone offer replacement laminate for the exterior of the cabinet for the s-plus?

Thank you, Harry R.

[stayouttadabunker]

Does anyone offer replacement laminate for the exterior of the cabinet for the s-plus?

Thank you, Harry R.

I don't know Harry but an NLG member from Oregon used to get some at his local hardware store and replaced it himself.
His NLG name is Builder Bob.

[harryr]

Thanks for the reply. I was hoping to find a "kit" with pre-cut pieces. I figured some company mass produced
them for IGT. I have one slot that has perfect factory laminate, and the edges look sharp and too clean to be
trimmed after install.

[stayouttadabunker]

I remember looking at some pictures of the factory
and they had a section where the cabinets are made.
Those laminate pieces are all cut to specs and applied in that room.
I'm sure any professional cabinet maker can do the exact same thing....
however, expect to pay the big bucks.

what you need is some local guy/company/outfit that knows how to do it good..preferably on a friends recommendation that has had some cabinetry/kitchen work done by them
and go see them if they would do it.

[lonnie]

You can buy at Lowe's or similar place. You can cut with jig saw and use trim router on edges. glues on with contact cement....You could lay on side and make a template for sides.

Lonnie