Welcome, Guest. Please login or register.
July 28, 2024, 09:10:45 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  how to pull down belly door?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: how to pull down belly door?  (Read 7290 times)
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« on: December 26, 2011, 02:33:06 AM »
heres a newbie question? im trying to open belly door but by sliding that lever on the side of the door it still wont open the belly door to drop down....... do i have to unscrew anything first?
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #1 on: December 26, 2011, 02:47:35 AM »
Normally no, just pull out on it, if you do not have a lock installed in the front hole of the door (if you do unlock it)

You can look at it with the door open and see if something is sticking (including the belly glass door) either because of spilled liquids or something being to tight.
I had  a S+ that I had to hold the latch open to close the belly door, it was that tight.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #2 on: December 26, 2011, 02:56:40 AM »
i thought i had to unscrew these 3 bolts first?

* IMAG0123.jpg (350.64 KB, 2560x1440 - viewed 290 times.)
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #3 on: December 26, 2011, 03:02:10 AM »
those are what the latch sides on.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #4 on: December 26, 2011, 03:14:33 AM »
this will not budge open i give up i hope my belly light doesnt die anytime soon lol.....ill never be able to open this belly door
Logged
slot monkey
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 402
Offline Offline

Gender: Male
Posts: 217
« Reply #5 on: December 26, 2011, 02:21:23 PM »
You can try to loosen the three screws a little bit to give the sliding bar more room to slide.

With the door open you can grab the knob with your left hand and grab the sliding bar with your right hand and pull both at the same time in the same direction.

Sometimes I clamp a vice grip on the sliding bar and use it to help get a grip with my right hand.
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #6 on: December 26, 2011, 05:14:21 PM »
Quote from: staz on December 26, 2011, 02:33:06 AM
heres a newbie question? I'm trying to open belly door but by sliding that lever on the side of the door it still wont open the belly door to drop down....... do i have to unscrew anything first?
NO just pull out on the knurled knob as shown and it will release the belly door (be careful the door will drop down and SMASH your glass )

* P1010302.JPG (875 KB, 2272x1704 - viewed 269 times.)

* P1010303.JPG (874.74 KB, 2272x1704 - viewed 305 times.)
« Last Edit: December 26, 2011, 09:31:59 PM by CaptainHappy » Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #7 on: December 26, 2011, 05:50:27 PM »
Staz, with the door open, pull that release knob and see if the slide moves at all. If it doesn't, it might be that the nut on the end of the release knob has come loose so it's not pulling the slide far enough for the door to open.
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #8 on: December 26, 2011, 09:11:44 PM »
i tried everything only thing left is to start taking parts off and see what the jamm up is on the door...... but i wont mess with it unless i really need to get into the belly door.....
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #9 on: December 26, 2011, 09:29:38 PM »
Quote from: staz on December 26, 2011, 09:11:44 PM
i tried everything only thing left is to start taking parts off and see what the jamm up is on the door...... but i wont mess with it unless i really need to get into the belly door.....

I know that this has been asked, but it can't hurt to ask again very specifically... Is there a lock installed, and are you sure that it is unlocked??? Can you post a picture of the side of the door like Plunger Boy did? The lock in question is in the picture near the curved part of the door above the knurled knob that you normally pull out on to open the belly door. See my modified picture that Plunger Boy posted for you.

Sorry if you have already checked this, but it would be good to confirm for everyone. If it is locked that knob will not budge.

I agree that you want to leave it alone if there is no need to get in, and if you do get it open, be sure that the belly door is supported by your hand so that it does not suddenly drop down and possibly bust your glass.

CaptainHappy CaptainHappy

* P1010303 MODIFIED.jpg (1239.58 KB, 2272x1704 - viewed 262 times.)
Logged
  Come sail away, Come sail away Come sail away with me..
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #10 on: December 26, 2011, 09:45:24 PM »
Staz,

In this picture you can see that I don't have locks installed, and you can see how the knob pulls out. Some are tight, but this one is really easy. My hand position is for demonstration only so that I can pull the knob, brace the door from falling while taking a picture at the same time! Take a Photo

I hope that a picture is worth a thousand words here? Scratch Head

CaptainHappy CaptainHappy

* _conv_2011-12-26_15-34-41_195.jpg (856.47 KB, 1280x2275 - viewed 298 times.)
Logged
  Come sail away, Come sail away Come sail away with me..
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #11 on: December 26, 2011, 10:45:28 PM »
thanks for the info guys but yes i have a lock on it and i did unlock it.......but its still wedged in there good! it wont open....... i can try to pry it open but with my luck i wont be able to close it lol.....
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #12 on: December 26, 2011, 10:59:16 PM »
yeyyyy i got it open  applause applause applause it took a little elbow grease now it opens easily......thanks everyone for your help!!!!

* IMAG0124.jpg (293.92 KB, 2560x1440 - viewed 278 times.)
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #13 on: December 26, 2011, 11:06:55 PM »
 WELL your inside now change the florescent tube light it probably needs it  stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking  ??? Were in the hell is BUZZ when we need a sarcastic comment   Cry Laughing Cry Laughing
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #14 on: December 27, 2011, 12:48:13 AM »
Buzz would probably say...>>>

"You might as well break something now!...
'cause there's nothing wrong with it"

* images.jpeg (6.35 KB, 200x252 - viewed 334 times.)
« Last Edit: December 27, 2011, 12:57:13 AM by stayouttadabunker » Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #15 on: December 29, 2011, 05:03:24 PM »
On one of my S2000 machines the belly door is incredibly stubborn -- I think that's what Staz ran into here.

Also, a very good point by PLUNGER BOY -- be careful when you're opening the door, or you could smash your glass.  In the case of "special" glass that's hard to find, that would be especially painful to do.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #16 on: December 29, 2011, 05:40:07 PM »
it was pretty jammed in there now it opens farely easy...... the hardest part was replacing the belly glass..... i put a new glass in there and i couldnt line up those 3 screws to the holes in the belly door...... took me over an hour to get them in there..... why would igt make it so damm difficult to line the screws up with the holes...lol
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #17 on: December 29, 2011, 06:19:48 PM »
Quote from: staz on December 29, 2011, 05:40:07 PM
it was pretty jammed in there now it opens farely easy...... the hardest part was replacing the belly glass..... i put a new glass in there and i couldnt line up those 3 screws to the holes in the belly door...... took me over an hour to get them in there..... why would igt make it so damm difficult to line the screws up with the holes...lol


You mean your mom never got you one of these when you were little !?!? ...>>>

* Staz pounding pegs.jpg (13.87 KB, 210x266 - viewed 272 times.)
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #18 on: December 29, 2011, 06:56:49 PM »
no i was deprived  Cry Laughing bust gut laughing bust gut laughing Cry Laughing bust gut laughing
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #19 on: December 29, 2011, 07:25:15 PM »
Haha! You're a good guy staz!
I'm glad you understand I was just joking around...
Your post about you having a hard time lining up 3 screw holes made my day!
Especially when after 20 years as a former high-steel ironworker -
I've stuck literally thousands of bolts in bridges and skyscrapers!

Hey! Can you guys see the new world trade high-rise from the Tappan Zee Bridge yet?
I remember we used to see the Twin Towers from that bridge years ago!

Have a great New Year man and win some big bucks down there!  yes
« Last Edit: December 29, 2011, 07:31:56 PM by stayouttadabunker » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #20 on: December 30, 2011, 02:28:55 AM »
Quote from: PLUNGER BOY on December 26, 2011, 11:06:55 PM
WELL your inside now change the florescent tube light it probably needs it  stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking  ??? Were in the hell is BUZZ when we need a sarcastic comment   Cry Laughing Cry Laughing

Now what kind of remark is that ? Nice pleasant fellow like me !!  Well one time I was pulling my Wife water sking and she called me a A$$ Hole, I never did figure out why she said that.  Scratch Head Scratch Head

I can't bad mouth Ol Staz, hell I kind of like him even though he could F/U a anvil with a rubber hammer.   Silly Me! Silly Me!  censored censored

Sorry Staz your turn in the barrel, you can have two free shots at me tomorrow.  Sorry! Sorry! hide1 hide1
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #21 on: December 30, 2011, 02:36:37 AM »
Quote from: Buzz on December 30, 2011, 02:28:55 AM
Quote from: PLUNGER BOY on December 26, 2011, 11:06:55 PM
WELL your inside now change the florescent tube light it probably needs it  stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking  ??? Were in the hell is BUZZ when we need a sarcastic comment   Cry Laughing Cry Laughing

Now what kind of remark is that ? Nice pleasant fellow like me !!  Well one time I was pulling my Wife water sking and she called me a A$$ Hole, I never did figure out why she said that.  Scratch Head Scratch Head


BUZZ   I think it was because she was on land at the time  Cry Laughing Cry Laughing Cry Laughing
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #22 on: December 30, 2011, 02:39:38 PM »
 bust gut laughing I can't stop laughing...my eyes are all watery!  rotflmao

"Buzz!!!! I THOUGHT these were WATER skis !!!"  Cry Laughing

Great thanks for the Friday laughs guys!!!  Tongue Out
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.121 seconds with 19 queries.