Welcome, Guest. Please login or register.
November 22, 2024, 02:48:30 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  Burned Out UV Eprom Eraser Lamp		 0 Members and 3 Guests are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Burned Out UV Eprom Eraser Lamp  (Read 18299 times)
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« on: January 12, 2012, 06:00:51 PM »
I was transporting my UV eprom eraser home and turned it on - no lights.  Scratch Head 3
So I removed the top cover and looked inside...the lamp is burned out!  bawling hissy fit

It's held in place by a couple of clips mounted to the floor of the box.
Four wires coming from the circuit board are soldered to the bulbs contact pins.
That's not a problem to un-solder and re-solder the wires when I get a replacement lamp.
But upon closer inspection  Sherlock Smiley of the lamp bulb itself - there are NO markings on it at all!  banghead

What in the world should I try to get as a replacement lamp/bulb?  Scratch Head 2
The lamp is 5-3/8" long and roughly 9/16" in diameter.

* Eprom Eraser guts.jpg (149.57 KB, 640x480 - viewed 320 times.)

* Burned Out Eprom Eraser UV Lamp.jpg (118.23 KB, 640x480 - viewed 304 times.)
« Last Edit: January 12, 2012, 06:29:06 PM by stayouttadabunker » Logged
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #1 on: January 12, 2012, 06:05:49 PM »
Should be a G15T5 Germicidal
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #2 on: January 12, 2012, 06:06:59 PM »
You have to go to China & get one.
Logged
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #3 on: January 12, 2012, 06:10:34 PM »
Sorry, I spoke too quick.  Here is a PDF for Sylvania. 
* Germicidal.pdf (159.15 KB - downloaded 632 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #4 on: January 12, 2012, 06:14:03 PM »
Oh! Thanks guys!  applause Kudos + to you guys!  yes

I'm going to pick up a G15T5 Germicidal lamp ASAP!

No Fordsbs! I'm NOT going to China for this!   bust gut laughing
Logged
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #5 on: January 12, 2012, 06:21:59 PM »
As I am going off of memory you may want to double check the PDF I attached.  It may be a F7 or F8
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #6 on: January 12, 2012, 06:57:51 PM »
For the price of the bulb, might be cheaper to just buy a new unit. 
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: January 12, 2012, 07:02:29 PM »
Quote from: poppo on January 12, 2012, 06:57:51 PM
For the price of the bulb, might be cheaper to just buy a new unit. 


haha! I almost agree with you Poppo!
I can't remember what I paid for this thing.
I've used it quite a bit...but 6,000 hrs?
I shouldn't be banging it around... rotflmao

I did some digging around.
The body of this UV lamp I have is: 135mm in length and 15mm in diameter.

That seems to match the dimensions on the chart to the website you led me to.
I think I would need the first on on top...the G4T5VH lamp or the G4T5L lamp?

Here's the link to that page...>>>

http://www.uvlamp-cn.com/wateruvlamp/b/2.htm




Click on chart below to super-size!...>>>

* UV lamp size.png (16.51 KB, 977x299 - viewed 334 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #8 on: January 12, 2012, 07:50:47 PM »
Gave up looking for a .9watt lamp to fit this thing.
All I see are the longer and 4 watts lamps.
So I bought a new eprom eraser...
It has little  bit of Chinese writing on it...  rotflmao

Total cost: $17.24  

* eprom eraser.png (363.79 KB, 656x557 - viewed 281 times.)
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #9 on: January 12, 2012, 08:37:14 PM »
I told you to go to China
Ford
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #10 on: January 12, 2012, 08:48:31 PM »
Oh no....Stayout is going to have to lean a new language to operate it. bust gut laughing

Ron (r273)
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #11 on: January 12, 2012, 08:49:24 PM »
Quote from: FORDSBS on January 12, 2012, 08:37:14 PM
I told you to go to China

...and take a slow boat there and back!   CaptainHappy Worried

   Crazy   rotflmao   bust gut laughing
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #12 on: January 12, 2012, 09:10:47 PM »
Quote from: r273 on January 12, 2012, 08:48:31 PM
Oh no....Stayout is going to have to lean a new language to operate it. bust gut laughing

Ron (r273)


哈哈哈！！你是一個非常愚蠢的傢伙！  Tongue Out
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #13 on: January 12, 2012, 09:16:47 PM »
Quote from: stayouttadabunker on January 12, 2012, 09:10:47 PM
哈哈哈！！你是一個非常愚蠢的傢伙！  Tongue Out

You don't say?
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #14 on: January 12, 2012, 09:19:34 PM »
你不知道我說 knagl什麼！！！你只是拉著我的腿！！LOL！！    CoolChicken
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #15 on: January 12, 2012, 09:37:24 PM »
哈哈哈！！你是一個非常愚蠢的傢伙！
HA HA HA!! You are a very foolish guys!

你不知道我說 knagl什麼！！！你只是拉著我的腿！！LOL！！
You don't know what I say KNAGL! ! ! You are just pulling my leg ! ! LOL! !

Translate with Bing......he he.

Ron (r273)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #16 on: January 12, 2012, 09:43:03 PM »
Quote from: r273 on January 12, 2012, 09:37:24 PM
哈哈哈！！你是一個非常愚蠢的傢伙！
HA HA HA!! You are a very foolish guys!

你不知道我說 knagl什麼！！！你只是拉著我的腿！！LOL！！
You don't know what I say KNAGL! ! ! You are just pulling my leg ! ! LOL! !

Translate with Bing......he he.

Ron (r273)

R273! You ratted me out!  bust gut laughing
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #17 on: January 12, 2012, 09:54:06 PM »
Quote from: stayouttadabunker on January 12, 2012, 09:10:47 PM
Quote from: r273 on January 12, 2012, 08:48:31 PM
Oh no....Stayout is going to have to lean a new language to operate it. bust gut laughing

Ron (r273)


哈哈哈！！你是一個非常愚蠢的傢伙！  Tongue Out
Quote from: stayouttadabunker on January 12, 2012, 09:19:34 PM
你不知道我說 knagl什麼！！！你只是拉著我的腿！！LOL！！    CoolChicken

WHAT??? Do we have a language button someplace in all of the buttons on the post form??? Scratch Head Duh! bust gut laughing I would have a better chance understanding if you put it in Swedish... You know pictures like in the ikea directions!!! arrow Tongue Out Crazy Cry Laughing

CH CaptainHappy

* ikea.jpg (301.45 KB, 1024x1562 - viewed 300 times.)

* ikea Henj-Page-2.jpg (300.24 KB, 1024x1562 - viewed 270 times.)
Logged
  Come sail away, Come sail away Come sail away with me..
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #18 on: January 12, 2012, 09:57:41 PM »
Wow! Looks like you can buy a kit and build "Stonehenge"  rotflmao
I really like instruction #7....wonder what he's saying?
The other guy is sitting down drinkin' something... chug


 
"Look Out!! I'm gonna drop this 300lb. rock on your head!!!" Tongue Out

Tools: A shovel

Dig a hole and drop a big rock into it.
Sounds like recipe for a rip-roaring good time!  Crazy
« Last Edit: January 12, 2012, 10:02:47 PM by stayouttadabunker » Logged
IFFV68
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 32
Offline Offline

Gender: Male
Posts: 784
« Reply #19 on: January 12, 2012, 11:00:17 PM »
I wouldn't go to China right now.
We are buying so many products from Chine  I  would wait until the Bridge is finished in a  couple of months and you can drive  there..  Unless you live in New  York City,  you can take a Cab. 
Good luck on the Bulb.
R.
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #20 on: January 12, 2012, 11:02:34 PM »
OK lets bet how many hours bunkers Chineeeeezzz eraser works before mass failure
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #21 on: January 12, 2012, 11:39:10 PM »
Quote from: PLUNGER BOY on January 12, 2012, 11:02:34 PM
OK lets bet how many hours bunkers Chineeeeezzz eraser works before mass failure

As much as I hate to say it, a lot of the electronics stuff coming out of China works pretty good.  I would rather buy USA, but I'm not going to pay 4x as much (and the components probably still came from China).
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #22 on: January 13, 2012, 12:03:02 AM »
Quote from: PLUNGER BOY on January 12, 2012, 11:02:34 PM
OK lets bet how many hours bunkers Chineeeeezzz eraser works before mass failure

 rotflmao haha! I've had mine for about 3-4 years now I believe.
Do I use it a lot? YEAH!
I'm ALWAYS constantly erasing eproms and fooling around with them!
But I do think now, when looking back at it, did NOT use up it's life of roughly 6,000 hrs.

I pulled the 3 screws off of the small transformer board in it.
Guess what I found under the board?
An NM27C512 stuck under it.

I'll betcha the eprom shorted out the board somehow and sent way more than 24 volts to the lamp!!!

Hey!  idea light bulb I have one of those currency checkers with the small blue lamp that's exactly the same length as this G4T5 bulb.
I wonder if it will work in a pinch?  stir the pot / get cooking

BE RIGHT BACK! ZOOOM!>>>> ( Bunker runs to go find it in the garage somewhere! >>>  Road Runner Snoopy )

Okay, I've placed the chip under a ...get this name...lol...>>> a "$CAN = PLU$" money detector.  LOL!
I think it was for checking Canadian bills at the store we had back in the 90's.
Anyways, I put the chip on top of a Christmas wrapping Scotch tape plastic dispenser thing so
the UV "eye" is about an inch away from the purple light.

I wonder how long it has to stay there to get erased?

* Trying to erase a chip 001.jpg (448.44 KB, 2532x1180 - viewed 320 times.)
« Last Edit: January 13, 2012, 12:31:08 AM by stayouttadabunker » Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #23 on: January 13, 2012, 12:28:49 AM »
I would say 15 minutes should do it if it's going to work.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #24 on: January 13, 2012, 12:57:27 AM »
Nope...15 minutes and the checksum is still the same. (note to self: 9400)
I'll leave it for another 45 minutes and see if the checksum changes at all...
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.104 seconds with 20 queries.