Welcome, Guest. Please login or register.
November 21, 2024, 08:51:23 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Bill Validators and Currency acceptors
| |-+  JCM DBV-45, DBV-145, and DBV-200 Bill Validators.
| | |-+  DBV-45 connector verification?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: DBV-45 connector verification?  (Read 3829 times)
igtdd
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 5
« on: January 21, 2012, 03:06:03 PM »
Hi. I am new to this group. I  have a Double Diamond deluxe -It had a bad battery when i bought it. replaced it.-ran clear and set chips and all is ok excepted that the dba wont take bills. it's a DBV-45-SS-6031-BO22    It looks like the connector on the top left rear has 2 wires-one red, one green- these look like they were clipped and moved. they are located from back to front order- green in bottom first and red in bottom 4 ? Is this correct? ( it looks like they were-green in top row 4th spot-and red bottom row 5th spot-could this be the problem?     All else looks good and goes thru set up cycle.  Thanks, Matt
Logged
rslots
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 7
Offline Offline

Gender: Male
Posts: 109


I can fix it!


WWW
« Reply #1 on: February 03, 2012, 03:15:27 AM »
Matt,  that wiring is correct.  Is the head and transport cycling when power is applied?  Sure you set the bill validator correctly when using the set chip?  Do you show 9_1 when you review options in test mode? Is the denomination selected?  These are just some of the things that can cause the BV not to work. 
Logged
Jim
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #2 on: February 03, 2012, 01:12:47 PM »
did the bill acceptor work prior to the battery going dead?  if so, and you haven't changed any chips , then it has to be a setting.

either 9_1 or  test 6 the denomination value. depending what SP chip you have will determine how to get to these tests.

the two wires in question will not cause this problem. they are an enable for the light panel that will lite up the yellow decal on the BV housing. the unit will work if this plug is not connected.


Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
igtdd
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 5
« Reply #3 on: February 03, 2012, 09:20:58 PM »
Thanks to both of you for your help. It is working now. I did the set chip again and it works. Only takes a dollar or a hundred dollar bill=can this be upgraded to take the newer bills? Thanks, Matt
Logged
rslots
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 7
Offline Offline

Gender: Male
Posts: 109


I can fix it!


WWW
« Reply #4 on: February 03, 2012, 11:33:10 PM »
Upgrading the bill head to a DBV200 will allow you to take all the bills in circulation except for the new colored $5.  Upgraded heads run about $75 or so.   
Logged
Jim
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 19 queries.