Welcome, Guest. Please login or register.
November 22, 2024, 08:26:46 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  **Video Gaming Machines** **General Chat**
| | |-+  Merit Technologies Dakota Superstar F32040		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Merit Technologies Dakota Superstar F32040  (Read 10273 times)
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« on: November 20, 2008, 04:20:42 PM »
I know how you feel techknight...I have been watching and reading this topic but I couldnt help you.
And I know the frustration you feel when you keep checking back here and still no one has replied...
I found that patience is the key. Someone somewhere will respond. yes
I have the same kind of corrupted screen on a Dakota Superstar video machine
made by Merit Technologies (Model F32040) that has been gathering dust.
If I get mine fixed, maybe it'll help you...
it's a pulltab/slot type of game.
I cant find anything on it....nada...nothing bawling

* Picture 031.jpg (11.87 KB, 320x240 - viewed 1290 times.)

* Picture 042.jpg (14.09 KB, 320x240 - viewed 1164 times.)

* Picture 043.jpg (11.15 KB, 320x240 - viewed 1202 times.)

* Picture 044.jpg (9.11 KB, 320x240 - viewed 1170 times.)

* Picture 045.jpg (9.2 KB, 320x240 - viewed 1235 times.)

* Picture 046.jpg (15.27 KB, 320x240 - viewed 1172 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #1 on: November 21, 2008, 01:09:37 AM »
no,
unfortunately I cannot clear the "code 4".
It goes back to that scrambled pixels.... hissy fit
Logged
techknight
Guest
« Reply #2 on: November 21, 2008, 01:18:59 AM »
yeap that board needs gone through. especially the SRAMs.

can you take pictures of those boards? Also you need to test all the components on the power supply also.
Logged
techknight
Guest
« Reply #3 on: November 21, 2008, 01:19:14 AM »
If you lived near me, i would come over and fix it. Tongue
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #4 on: November 21, 2008, 01:32:12 AM »
I actually have two boards...pics tommorow morning...
thanks for your help on this Hail
Logged
techknight
Guest
« Reply #5 on: November 24, 2008, 12:57:49 PM »
damn it was tomorrow like 2 days ago.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: November 24, 2008, 02:22:34 PM »
OKAY OKAY OKAY! LOLOL rotflmao I'm so sorry!!!!please forgive me!
here they are....The first board had markings on the chips, the other board only has green tape over them.

* Merit boards 001.jpg (110.16 KB, 640x480 - viewed 509 times.)

* Merit boards 002.jpg (111.06 KB, 640x480 - viewed 476 times.)

* Merit boards 003.jpg (110.74 KB, 640x480 - viewed 492 times.)

* Merit boards 004.jpg (110.74 KB, 640x480 - viewed 463 times.)

* Merit boards 005.jpg (110.1 KB, 640x480 - viewed 478 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: November 24, 2008, 02:24:21 PM »
Here's the 2nd board pictures...

* Merit boards 006.jpg (110.34 KB, 640x480 - viewed 476 times.)

* Merit boards 007.jpg (108.86 KB, 640x480 - viewed 466 times.)

* Merit boards 008.jpg (110.38 KB, 640x480 - viewed 532 times.)

* Merit boards 009.jpg (110.87 KB, 640x480 - viewed 470 times.)
Logged
techknight
Guest
« Reply #8 on: November 24, 2008, 08:57:54 PM »
you need to change the SRAM. the pictures arnt a high enough resolution to see what the part numbers are.

Also the dallas chips need replaced as they have a battery inside that chip which has died by now.
Logged
techknight
Guest
« Reply #9 on: November 24, 2008, 09:13:32 PM »
the 6264 is commonly available as 6264LP-70

not so sure on the dallas chip.

Also for safekeeping perposes, the data on all those 27512 EPROMs need dumped and saved just in case a failure occures in the future on the chip. (bitrot)
Logged
techknight
Guest
« Reply #10 on: November 24, 2008, 09:17:56 PM »
and one thing that I noticed. both of those game boards are the same. only difference is probably one has a different game programmed in the EPROMs.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #11 on: November 24, 2008, 10:16:23 PM »
Thanks techknight,
I'll be damned if I know where to start looking for replacement chips for this thing.
I want to thanks you for all the help you've given me so far.
I am amazed at what you can tell from my terrible photography...
As far as the 2624chip, do I buy blanks like from digikey or mouser be okay?
Or must the chips be formatted and programmed?
I'll bet no one for the next bunch of years will have a "clear" chip for these rams.
I may just strip the machine and throw a cherry master game in it! Tongue Out
Logged
techknight
Guest
« Reply #12 on: November 24, 2008, 10:31:42 PM »
lol... SRAM is RAM. or Volatle memory. memory is lost when power is lost. period. Tongue

its 6264. i dont know where you got that number from. Just replace them.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #13 on: November 24, 2008, 10:37:22 PM »
oh...lol.......duh okay...a lot I know huh? rotflmao

ADD>> 2664, 2624...I must be dyslexic or something now.......
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #14 on: November 26, 2008, 06:54:47 PM »
I changed out the Dallas rams and then put back in the old Dallas rams...
The game is working perfectly....amazing huh?
Thanks for your help on the rams...
I think switching the rams cleared out something then the game booted up perfectly when I re-installed the old rams.
Now, I'm gonna fool around with the other board and see what it is...
Kudos + to ya techknight!


I posted a few pics in no particular order but to show that I played some tabs then hit the cash out button,
the credits got knocked down to zero and got a printout down below in the tray.

* Dakota Superstar Pull Tab Game 001.jpg (109.4 KB, 640x480 - viewed 502 times.)

* Dakota Superstar Pull Tab Game 002.jpg (110.13 KB, 640x480 - viewed 509 times.)

* Dakota Superstar Pull Tab Game 004.jpg (110.04 KB, 640x480 - viewed 520 times.)

* Dakota Superstar Pull Tab Game 006.jpg (109.16 KB, 640x480 - viewed 472 times.)

* Dakota Superstar Pull Tab Game 005.jpg (109.99 KB, 640x480 - viewed 485 times.)
Logged
techknight
Guest
« Reply #15 on: November 26, 2008, 09:02:33 PM »
told ya. hehe.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #16 on: November 26, 2008, 10:04:34 PM »
haha yes you did! I gotta thank you for that.
I got a question for ya.
If I sent the board to you, could you burn me a copy of everything  in case this happens again?
It's good to have spares but I dont know crap about burning eeproms.
Heck, I dont even own one.
I'll reimburse you for what ever you need to make a copy.
Would you need the whole board or just certain items?
Logged
techknight
Guest
« Reply #17 on: November 26, 2008, 10:30:59 PM »
Well it seems the ROMs are ok, if the game is playing normal.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #18 on: November 26, 2008, 10:34:47 PM »
Okay thanks techknight,
My grandmother really likes it....I'm thinking of giving it to her for xmas.
I might get into eeprom burning later but right now I'm awaiting a huge CON1 to come in and start playing with that...
I may not have any hair left after this...lol
Did you ever get your Bally video game going yet?
Logged
techknight
Guest
« Reply #19 on: November 26, 2008, 11:09:50 PM »
Yea but im going to have to look deeper into the address decoding/latch circuits as the lights dont appear to work.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.083 seconds with 20 queries.