My new toys

[Neonkiss]

As I posted before, I picked up two S-2000's that were a little more than cabinets.
Sometime you have to take what you can get your hands on as some areas of the country this stuff is hard to come by.
So this was my first introduction into the S2000 platform.

I would like to thank Foster, Coorslight and all others that chimed in where I needed help.
Also LA Slots and Blueridge for the incredible source of high quality parts, fast shipping and hard to find items.

First machine,
was a 9" chop top and was in the best shape of the two. Might as well start with the easy one.
Had a GREAT R/T IDOJ glass kit that I always wanted to install in a machine when I got one.
Changed the top as it was a funky green marble Formica to match the white base.

[FORDSBS]

    GREAT JOB

[Neonkiss]

Second machine was a pre-vision (1998) 9 inch chop top that was missing a ton.
Wiring harness for the pre-vision was not provided for a printer or lighted reels. Also someone had butchered the coin in wire harness because they couldn't find a jumper plug to go coinless.
Also noted is that since the pre-vision machines were never intended to have printers all the connections up to the top box had to be relocated about 3 inches to the right to make room for a printer bracket.

All in all it was a great project and exactly what I needed for my introduction into S2000.

For this machine I chose a 3CM Mummy kit.
Both machines have lighted reel, MMLT boards with sound simms, coin in, printers and up-dated WBA 13's

[FORDSBS]

GOOD CHOICE OF GAMES

[Neonkiss]

two more pic's

[PLUNGER BOY]

   GREAT GAMES .     I also have a IDOJ round top and a THE MUMMY but it is a 2 coin round top . All you need now is the mummy reel glass I found one but it was $$$$$$$

[Yoeddy1]

Neonkiss, welcome to the world of S2000!  Man, what a way to kick it off!  3CM Mummy...way-to-go!  Somebody is looking after you with the "hard to find parts." 

I've had a couple of chances to get an IDOJ 3CM RT kit, but for some reason I just can't pull the trigger on that one.  Either the sales pitch wasn't strong enough, or I haven't been stroked enough from a video.  Take some footage of your IDOJ and maybe I'll hunt for one again. 

Enjoy the treasures man!

Jason

[coorslight115]

As I posted before, I picked up two S-2000's that were a little more than cabinets.
Sometime you have to take what you can get your hands on as some areas of the country this stuff is hard to come by.
So this was my first introduction into the S2000 platform.

I would like to thank Foster, Coorslight and all others that chimed in where I needed help.
Also LA Slots and Blueridge for the incredible source of high quality parts, fast shipping and hard to find items.

First machine,
was a 9" chop top and was in the best shape of the two. Might as well start with the easy one.
Had a GREAT R/T IDOJ glass kit that I always wanted to install in a machine when I got one.
Changed the top as it was a funky green marble Formica to match the white base.

Looks real good, glad to know all my extra parts went to good use !!