Welcome, Guest. Please login or register.
November 23, 2024, 12:37:26 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Electromechanical
| | |-+  Help with hopper
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Help with hopper  (Read 2290 times)
Carne_Asada_Guy
Guest
« on: March 06, 2012, 07:37:59 PM »

Okay.. here's another question... now mind you, i dont know
much about these machines.  Lol, i'm new.

(( some photos here ))





The hopper:  could the situation of it being only 1/3 full be a
reason for incorrect payouts.  What happens is this:

70% of the time, it pays out correctly
30% of the time, it pays out wrong

When it's wrong.. it's usually short a few quarters.  Even times when it should pay 10,
it sometimes will pay 8 or 9. 

The hopper never pays MORE than it is supposed to... just short pays.

Next question... i have no idea if the hopper is in a fixed and permanent position?  Since
i dont have piles of quarters around (yet)... i'll play the machine for 10 minutes, then shut off
open door & reach in.  Problem is... the opening is pretty dang small.... and for my adult it's
really cumbersome, etc, etc, etc...    Suggestion?

    matthew
Logged
RiseLikeRa
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 32
Offline Offline

Gender: Male
Posts: 277



« Reply #1 on: March 08, 2012, 02:34:28 AM »

Hopper slides in amd out on rails.  Your machine looks pretty weathered so it may not pull out easily but it will pull out.  DO NOT SPRAY lubricant into cabinet.  If you can DROP some lubricant and let it sit for a while that might help.  As for your payout problem,  sounds  like it may just be a simple adjustment on the left side of the hopper.  My advice is free and worth every penny.
Logged
Carne_Asada_Guy
Guest
« Reply #2 on: March 08, 2012, 04:18:52 PM »

Thanks for the response.. will keep it in mind!!

My objectives now are to get a bulb for the lighting of the reels... and get a cabinet.

I guess one step at a time.   I hope to spend a little dough along the way -- and, maybe have
a valuable machine soon.

   matthew
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.109 seconds with 19 queries.