Welcome, Guest. Please login or register.
November 23, 2024, 10:26:52 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Powering Back-Lit Reels		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Powering Back-Lit Reels  (Read 4477 times)
mah
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 29
Offline Offline

Gender: Male
Posts: 246
« on: March 14, 2012, 04:15:23 PM »
Was hoping someone would explain (or direct me to a thread on) how to power back-lit reels when the power supply harness is not equipped with the additional plug.

Searched threads with no success.

As always, any help is appreciated.

Mike
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #1 on: March 14, 2012, 06:00:38 PM »
You have the top board or the bottom board there in the back right of the machine just under the reel shelf?
It would on the back wall next to the handle mechanism...>>>

* S2000 Reel Controller Board.png (514.96 KB, 478x484 - viewed 290 times.)

* S2000 Reel Controller Board PN 76936300l.png (538.96 KB, 478x484 - viewed 269 times.)
« Last Edit: March 14, 2012, 06:08:42 PM by stayouttadabunker » Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #2 on: March 14, 2012, 06:48:59 PM »
It sounds like he's needing to add a power harness for a machine that doesn't have one Bunker
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #3 on: March 14, 2012, 07:28:05 PM »
 If your going to TRY to use lighted reels FIRST the game has to support it .  then you will need as follows . lighted reels  . control board .  Reel harness and I/O and controller power harness. NOTE #### the controller board is different on a 5 reel and a 3 reel  as is the harness as it was not specified as to what you have  .I  do not know about 4 reel machines as i do not have one . Other than a 3 reel with bonus reel AS in (SIZZLING SEVENS SUPER SPIN )  ALSO Controller may have a metal cover over it or not

* P1010251.JPG (876.63 KB, 2272x1704 - viewed 291 times.)

* P1010253.JPG (882.51 KB, 2272x1704 - viewed 285 times.)
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #4 on: March 14, 2012, 07:35:47 PM »
MAH, if you haven't already looked there, the power harness for the backlight control board is usually tied up and buried right at reel shelf level on the back wall of the cabinet. Generally just above and a little left of where it plugs into the backlight control board. I guess some vision ready cabinets didn't have it, but I think it was FORDSBS or Foster who posted a workaround for that. When I can get to an actual computer I'll try and find it for you
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #5 on: March 14, 2012, 07:49:35 PM »
Click on the topic below. Reply 4 or 5 from Foster talks about adding that plug. Or at least tells what power you'll need and what pins on the plug it has to go to

http://newlifegames.net/nlg/index.php?topic=16572.0
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #6 on: March 14, 2012, 08:04:21 PM »
This is the link I was actually lookinf or, try this

http://newlifegames.net/nlg/index.php?topic=12346.0
Logged
mah
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 29
Offline Offline

Gender: Male
Posts: 246
« Reply #7 on: March 15, 2012, 01:12:43 AM »
Quote from: cowboygames on March 14, 2012, 06:48:59 PM
It sounds like he's needing to add a power harness for a machine that doesn't have one Bunker

Exactly, trying to power back lit reel with no harness present.  There is not one tucked away where it usually is.
Logged
mah
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 29
Offline Offline

Gender: Male
Posts: 246
« Reply #8 on: March 15, 2012, 01:14:59 AM »
Quote from: cowboygames on March 14, 2012, 08:04:21 PM
This is the link I was actually lookinf or, try this

http://newlifegames.net/nlg/index.php?topic=12346.0


This is exactly what I was looking for. 

Thanks to all.  Hope to get to it in a day or two.

mah
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: March 15, 2012, 11:31:34 AM »
Quote from: mah on March 15, 2012, 01:12:43 AM
Quote from: cowboygames on March 14, 2012, 06:48:59 PM
It sounds like he's needing to add a power harness for a machine that doesn't have one Bunker

Exactly, trying to power back lit reel with no harness present.  There is not one tucked away where it usually is.

Oh okay!
I thought there was a difference between the header connections for two reel driver boards for the power -
but they look the same actually.
So, all's is good there...
I'm glad you found the power harness.
Looks pretty simple really...someone had an extra one for you?
Also, Foster seems to point out that he didn't like all that extra juice running through the motherboard/backplane traces.
From what unit will you you be getting the power from?
The power supply box or the motherboard header?
Logged
mah
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 29
Offline Offline

Gender: Male
Posts: 246
« Reply #10 on: March 15, 2012, 01:09:37 PM »
Well, where and how I power it will depend on whether I can find the correct plug ends to make a harness to plug into the motherboard. 

I will definetly need to find the correct plug for the controller.  As far as the other end, my first thought if I don't have the correct motherboard plug is to tap into each individual wire using a "splice connector" available at radio shack.  You do not have to cut the wires.  The wire your tapping into runs completely through the little plastic device.  You place the end of the second wire half-way into the device and close the lid.  You then crimp the metal tab sticking out one end and it cuts through the wire insulation of each wire to make a connection.  Very clean splice.  This concept is used on low voltage outdoor lighting to tap into the power cord.

I'll just have to read the instructions carefully so I don't cross wires.

If anyone has a harness to plug into the motherboard already made up as pictured in the link provided, I would be interested.

I hope to get to this project soon.

Thanks,

mah

     
« Last Edit: March 15, 2012, 01:17:35 PM by mah » Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #11 on: March 15, 2012, 01:14:13 PM »
Here's the picture of the haness you're talking about?...>>>

* NLG_Harness_005.jpg (15.44 KB, 350x262 - viewed 315 times.)
Logged
mah
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 29
Offline Offline

Gender: Male
Posts: 246
« Reply #12 on: March 15, 2012, 01:19:28 PM »
That's the one!

Anyone have one?  Back-lit Fox and Hound depending on it.  applause
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.588 seconds with 20 queries.