Welcome, Guest. Please login or register.
November 21, 2024, 08:04:11 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff
| |-+  Other Arcade Games
| | |-+  Megatouch Maxx Power Supply		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Megatouch Maxx Power Supply  (Read 20175 times)
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« on: January 26, 2009, 10:05:12 PM »
I have a Megatouch Maxx that is resetting.  I have a feeling that it may be the power supply.  Does anyone know if this is a power supply that I can purchase at a good computer store?  The ones on eBay seem a bit too expensive.

Rob
Logged
---
Rob Rosenhouse
Verona, NJ
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #1 on: January 27, 2009, 12:39:05 PM »
I've seen plenty of computer power supplies, but haven't ever seen a pic of the ones in the Megatouch games.

Can you post a pic?

RJ
Logged
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #2 on: January 27, 2009, 12:53:09 PM »
Sure.  Here they are.  I know it is a pc power supply, but I don't know if it has any custom or odd-ball connectors on it.

Thanks,
Rob

* ps.jpg (327.24 KB, 1024x768 - viewed 512 times.)

* maxx.jpg (409.93 KB, 1024x768 - viewed 689 times.)
Logged
---
Rob Rosenhouse
Verona, NJ
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #3 on: January 27, 2009, 01:25:27 PM »
Hello!

That's an old school AT power supply - NOT ATX.  I doubt any local computer store would stock these anymore as the last machine I can remember using these was a Pentium 1.  You can always check - but might be tricky to find...

Here's a link to one on Newegg http://www.newegg.com/Product/Product.aspx?Item=N82E16817338010

That motherboard from the pic looks like a standard PC motherboard - like a 386 or a 486.  Haven't seen one of those in awhile Smiley

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #4 on: January 27, 2009, 01:34:42 PM »
Actually - I just looked at the label on the power supply itself and it does say it's an ATX power supply (145 Watts) - they must have a power adapter on it - haven't seen one of those in awhile - they were used to convert a newer ATX supply to work with an older AT motherboard.  I've attached a pic...

So yes - I would think a standard ATX power supply from your local computer store should be fine.  Just save the receipt, just in case Smiley

Dan #2

* ATX-to-AT-Converter-ATX-AT-2WIRE-350x350.gif (20.34 KB, 350x350 - viewed 2173 times.)
Logged
A great man once said, "I was told last time I would get a piece of cake."
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #5 on: January 27, 2009, 01:42:44 PM »
You can also buy an ATX and just splice the wires together as all colors are common and the same as the old one.  Not much has changed in terms of power supplies from old to new in terms of voltage (colors are the same) - you can also get a new molex connector and pins for the professional look.
« Last Edit: January 27, 2009, 02:20:28 PM by Slotmaster » Logged
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #6 on: January 27, 2009, 01:50:32 PM »
About how many splices are there?  I can live with a few, but it there are a lot, I'd rather get something designed to fit, as it will look much nicer without too many splices.

Thanks,
Rob
Logged
---
Rob Rosenhouse
Verona, NJ
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #7 on: January 27, 2009, 01:55:47 PM »
From the picture I count 10 - was just an option if you did not want to wait etc. 

You can source a replacement as well as noted. 

« Last Edit: January 27, 2009, 02:13:19 PM by Slotmaster » Logged
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #8 on: January 27, 2009, 02:10:30 PM »
I have a feeling the adapter is already there - so I don't think he will have to splice anything.  Follow the cables I have the arrow on back to the power supply.  I have a feeling you will find there is an adapter already there....

Dan #2

* index.jpg (198.05 KB, 1024x768 - viewed 566 times.)
Logged
A great man once said, "I was told last time I would get a piece of cake."
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #9 on: January 27, 2009, 02:15:55 PM »
I was thinking the same thing as there should be one already but I figured maybe not as rob probably would not have asked?    It would be a straight forward replacement then, plug and play.

Rob,

Do you see an adapter?
« Last Edit: January 29, 2009, 02:05:30 PM by Slotmaster » Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #10 on: January 27, 2009, 02:57:42 PM »
Quote from: PinballWiz on January 26, 2009, 10:05:12 PM
I have a Megatouch Maxx that is resetting.  I have a feeling that it may be the power supply.  Does anyone know if this is a power supply that I can purchase at a good computer store?  The ones on eBay seem a bit too expensive.

Rob

I usually recap the power supplies in these, however, how often does it reset?  did you clean the cpu fan? Does it boot up all the way each time?  The motherboards can be troublesome in these also.

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #11 on: January 27, 2009, 03:08:28 PM »
Hi   check all the caps on the logic board,there are three up near the top ,right side, if the are rounded on the top could be one of your problems. check all the fans, and openings blow them out just for the heck of it,heat build up has been a problem.

Jameco eletronics sells a at ps (provided u can't find one thru nlg)   #1537424------29.95    2008 catalog  282  may

Jim 
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #12 on: January 28, 2009, 09:47:56 PM »
Quote from: dpalmi on January 27, 2009, 02:10:30 PM
I have a feeling the adapter is already there - so I don't think he will have to splice anything.  Follow the cables I have the arrow on back to the power supply.  I have a feeling you will find there is an adapter already there....

Dan #2

I took the power supply out, and there is only a typical 20 pin connector plugged into the rest of the game.  No hard drive power plugs like you would find on a computer PS.  Pin for pin, the wire colors are the same.  The only thing that concerns me is that the Megatouch PS is very small.  I don't know if the local computer place will have one that will physically fit.

Rob
Logged
---
Rob Rosenhouse
Verona, NJ
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #13 on: January 29, 2009, 01:48:31 PM »
Hello Rob,

Now that I look more closely at the picture, I can see it is not a standard size power supply.  You won't be able to find this one locally.  Just from looking at the back, I did find the one pictured below on eBay - it looks like a match - but because I can't see the whole thing it's hard to tell.  Take a look at the auction http://cgi.ebay.com/FOXLINK-FTPS-0103-150W-MINI-ATX-POWER-SUPPLY_W0QQitemZ220342115636.

Dan #2

* 4660280.jpg (16.35 KB, 405x480 - viewed 454 times.)
Logged
A great man once said, "I was told last time I would get a piece of cake."
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #14 on: January 29, 2009, 01:53:41 PM »
Quote from: PinballWiz on January 28, 2009, 09:47:56 PM
No hard drive power plugs like you would find on a computer PS.

Hello Rob,

You mention that it doesn't have any hard drive power plugs on it - but it the picture I can see those type of plugs (see pic below and red circle).  Where do they come from?

Dan #2

* index2.jpg (199.76 KB, 1024x768 - viewed 548 times.)
Logged
A great man once said, "I was told last time I would get a piece of cake."
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #15 on: January 29, 2009, 01:55:50 PM »
Hello again,

Actually that supply I listed might be too long - try this one...

http://cgi.ebay.com/NEW-Green-450W-Micro-Mini-ATX-m-ATX-POWER-SUPPLY-PC_W0QQitemZ260353318888

Dan #2

* is.jpg (10.72 KB, 300x300 - viewed 1824 times.)
Logged
A great man once said, "I was told last time I would get a piece of cake."
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #16 on: January 29, 2009, 02:36:19 PM »
Quote from: dpalmi on January 29, 2009, 01:55:50 PM
Hello again,

Actually that supply I listed might be too long - try this one...

http://cgi.ebay.com/NEW-Green-450W-Micro-Mini-ATX-m-ATX-POWER-SUPPLY-PC_W0QQitemZ260353318888



Dan #2


Thanks for the tip.  I purchased one similar to this PS last night, and unfortunately, the game still does not work.  The drive will try to start, it loads linux, and then gets to the point where it loads the Megatouch software, but it generally hangs, or reboots.  I am not sure what to do at this point.

Can someone help?

Thanks,
Rob
Logged
---
Rob Rosenhouse
Verona, NJ
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #17 on: January 29, 2009, 02:44:45 PM »
Hmmm...

Corrupt hard drive, bad memory, bad CPU fan, bad caps on the motherboard, bad motherboard... There are quite a few things that can cause reboots.
Logged
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #18 on: January 29, 2009, 03:00:01 PM »
Rob     check the caps , Merit never did figure out how to cool the cabinet properly, the cpu fan is cheap and goes out all the time, other than that unless you can swap drives or mother boards your at a hard place. You can go to merit indusrties web site and they have all kind of info.there and if I recall , they used to make a upgrade for that machine,but stopped last year or the year before. I think they might advance replace-----but to me the price seems to question weather to do it or not.

Jim

PS.  That part number was wrong in my earlier post,  #692414    Autec power supply  300 watt    6.0Lx 5.6Wx3.4H     $ 29.95   
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #19 on: January 29, 2009, 03:55:26 PM »
Quote from: channelmaniac on January 29, 2009, 02:44:45 PM
Hmmm...

Corrupt hard drive, bad memory, bad CPU fan, bad caps on the motherboard, bad motherboard... There are quite a few things that can cause reboots.
If it reboots at the same place then I would first check the HD, then memory.  If random points then power, motherboard etc. 



Logged
Randy0777
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 311
Offline Offline

Gender: Male
Posts: 561
« Reply #20 on: February 28, 2009, 08:14:26 AM »
Hi PinballWiz , when I read your first post I was thinking as you were playng it ,it would just reboot(restart). Than from your other post it sounds like it is starting to boot up then stops and tries to boot again??? Either way,its easy to repair. If it reboots during play,its heat. If it will not finish booting up during the power on,watch the screen and it will say what failed... that is if you see the screen. Tell us more  Tongue Out. And yes,the fans suck in them.
Logged
Wavtous
Guest
« Reply #21 on: July 16, 2009, 12:04:20 PM »
Hello All
Have A Mega Touch Jade Edition
Will Power Up Shortly Then No Beep For Boot Up
Screen Small Blip Then Nothing
can it be my power supply?
no fans run or anything
help   Ron
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.129 seconds with 19 queries.