Welcome, Guest. Please login or register.
October 31, 2024, 09:44:07 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Electromechanical
| | |-+  odds unit disc trouble in a 956 low boy
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: odds unit disc trouble in a 956 low boy  (Read 1912 times)
arfulruf
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 16



« on: May 16, 2012, 04:10:01 AM »

Im having trouble with the odds unit disc in my 956. I think that with good pictures from the bottom and the side will help. Does anyone know how to put these units back together? The odds unit will not pulse the X units at all.


* DSCI0243.JPG (874.38 KB, 2048x1536 - viewed 301 times.)
Logged
OldReno
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 175
Offline Offline

Gender: Male
Posts: 818



« Reply #1 on: May 18, 2012, 01:29:37 AM »

Since that unit can go back on one of two ways, I generally put a little black dot on the UP side with a sharpie.  That way I know I'm putting back on correctly.
If it don't work one way, flip it over 180 and try it again.
Also, you might want to put little arcs on those fingers to give them good pressure when you put it back on.  Make it look like a little spider, and when you push down on it you should see the legs give. Like a spider doing push ups on a mirror.
You might look at the wiring on the back of the odds board to get an idea which fingers are used.
also look for any wires coming loose on the odds board, or any jumpers coming loose.
If all else fails, check the wiring to your X coils for continuity to the odds disc itself.
Remember, also, you have a little wiper protruding from the odds board what touches on the inside ring of yours odds 'spider'  Make sure that is contacting.
Also make sure it is mechanically able to physically step up and reset by pushing on your step up plunger, and your reset plunger to verify it steps and resets.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.076 seconds with 19 queries.