S2000 enhanced boards with the piggyback board

[sbsgroup]

I have this board in new machine and wondered if ram clear and key works the same as on my older machines?

Thanks

[cowboygames]

Yep, use the same procedure you would for a 500 series board

[sbsgroup]

I am still learning but the older boards have two amber lights that light up in the 1 and 2 position when the clear is done,  the 1 and 2 are green on the enhanced board( is this different color same meaning?)

[cowboygames]

Yep, 2 lights is the key

[sbsgroup]

Thanks for the info!!  I think you were involved in a post a while where someone with an enhanced board was getting a netplex error,  I have a machine that when you boot it up it pulses and gives an netplex down error.  By pulse I mean that the bill acceptor cycles for a split second and the reel lights cycle at the same time for a split second and the amber and red light on the mpu flash.  Did this get resolved in the prior post.

[cowboygames]

I remember the situation, but not the exact post as there've been many of these lately. A single green or amber light in conjunction with a flashing red light indicates that the initialization process has been interupted due to a problem with the MPU. There are various things, some fixable some not, that can cause that problem