Welcome, Guest. Please login or register.
November 01, 2024, 04:33:52 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Hopper shutting down display
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Hopper shutting down display  (Read 1934 times)
Magicslots
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 62
Offline Offline

Gender: Male
Posts: 810



« on: June 29, 2012, 06:14:12 PM »

I am converting a S2kl with an enhance R-board.  They wanted a coin mech etc on the game.   The coin mech etc, all functions as it should. But when I plug in the hopper,
The game displays a "No Disp" on the leds, and then when the game cycles, it shows nothing and does nothing.  Unplug the hopper and the game runs normally again.  Short in the hopper plug?
  Scratch Head
I have tried 2 different hoppers each give the same problem.  I am stumped here, I have never seen the error before.   Ideas????
Logged

"Any man who is under 30, and is not a liberal, has no heart; and any man who is over 30, and is not a conservative, has no brains."  (Sir Winston Churchill)
brianfink
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 348



« Reply #1 on: July 02, 2012, 07:25:19 PM »

I have never had this problem with a hopper but have had similar problems with a bill exceptor or bad wireing somewhere shorting out and causing the display not to work I also had similar problems just because sombody had plugs in the wrong spot on the back plane so if all your plugs seem to be where they should be then you probly have a short in the plug or wireing for the hopper
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #2 on: April 07, 2013, 09:46:56 PM »

Just had a machine do the same thing....with hopper in, NO DISP showing and no VFD at all. Replaced with known good hopper, problem solved. To verify, we tried the problem hopper in a working machine, and got NO DISP in it as well.

Not exactly sure what the problem with the hopper is, but thought I would post, as many fixes for the NO DISP point towards the bill validator.
Logged

Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.087 seconds with 20 queries.