Welcome, Guest. Please login or register.
September 28, 2024, 06:19:40 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  Bally 5000, 5500 and Others.
| | |-+  Bally 5500 Blazing RESET questions/ problems		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 5500 Blazing RESET questions/ problems  (Read 2826 times)
retsof1949
Guest
« on: July 09, 2012, 03:22:01 AM »
My 5500 Blazing RESET light stays lighted.  Can anyone help me?  How do it get it to reset and stay dark?  Some brief history.  I am new to this...... I had a code 81, so I had the battery replaced...... then I got the code 83...... which meant I needed to do a ram clear...... so, I bought those 5500 clear chips for UL12 and UL15 and followed the complete clear procedure from the manual (pg. 2-11).  I never got the CH C or CL C message in the win window and my reset button stays lighted.  I turned the power off, pressed the reset button once I powered up again and nothing.  Also, tried holding the reset button and then powering up and still nothing.

I need help, please!! Help
Logged
Blueslots
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 22
« Reply #1 on: July 09, 2012, 07:10:10 AM »
Hi did u jump the jumper u need to Jp to clear its close to the batt
Logged
retsof1949
Guest
« Reply #2 on: July 09, 2012, 03:21:13 PM »
Thanks Blueslots..... I'll try that.  How do I do that? (I'm new to this).
Logged
retsof1949
Guest
« Reply #3 on: July 10, 2012, 08:11:19 PM »
@Blueslots or anyone else who can help, I checked the JW12 switch near the battery and it is in place on both prongs.  Is that the way it should be?  Again, I have the manual, but it really doesn't say anything about that.  The RESET light still stays lit.

Also, on JW10 I have a little tag on that black rectangular plug that says "Ram Clear".  It is on only one of the two prongs (the left one, as you face it).  Do I need to do anything with this?

I have the RamClear chips in the MPU.

Bottom line, RESET is still red and I'm not sure what to do or try next.

BTW, Anybody know of a repair tech in the Portland, OR area who take a look and help me?

A few Photos attached to help see more detail of what I am dealing with.

* P1020688.jpg (423.81 KB, 2560x1920 - viewed 396 times.)

* P1020676.jpg (61.15 KB, 480x640 - viewed 387 times.)
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.083 seconds with 19 queries.