S2000 Multi Denom Setup

[sbsgroup]

I have an S2000 with enhanced board I have been unable to set it up for multi.  It is 1 cent and 5 cent.  1 and three are 1 cent and 2 and 4 are 5.  Does anyone know how to set this up on an enhanced board.
Thanks for any assistance.

[leapyearguy]

7.1.1 Denomination 7.1.1.1 Accounting Denomination: This page determines the denomination
of accounting units. The denomination selected determines which
denominations are available for the hopper/coin acceptor and playerselectable
denominations. The available accounting denominations are 0.01,
0.02, 0.05, 0.10, 0.20, 0.25, 0.50, 1, 2, 2.50, 5, 10, 20, 25, 50, 100, 200, 250,
500, 1000, 2000, or 2500.
NOTE: RAM and EEPROM must be cleared prior to changing the accounting unit
denomination.
7.1.1.2 Coin Denomination: This value must be set to the denomination of
the hopper and coin acceptor. The value can be set from the Operator Menu
after turning the machine on for the first time; subsequent changes require the
key chip. The available denominations are 0.01, 0.02, 0.03, 0.05, 0.10, 0.20,
0.25, 0.50, 1, 2, 2.50, 5, 10, 20, 25, 50, 100, 200, 250, 500, 1,000, 2,000,
2,500 and 5000.
NOTE: The coin denomination cannot be set below the accounting denomination.

7.1.1.3 Player Denomination: This page determines the denominations that
will be available to the player. Use the CHANGE button to select Player
Denom 1 through 4 and use the CASH OUT button to select the denomination
to be associated with that Player Denom. The available player-selectable
denominations vary, depending on the selected accounting-unit denomination.
Example: When the accounting unit equals 0.01, the possible playerselectable
denominations are 0.01, 0.02, 0.03, 0.05, 0.10, 0.20, 0.25, 0.50, 1,
2, 2.50, 5, 10, 20, or 25. When the accounting unit equals 1, the possible
player-selectable denominations are 1, 2, 5, 10, 20, 25, 50, 100, 200, 250,
500, 1000, 2000, or 2500.
7.1.1.4 Denomination Touch Panel: When an EZ Play Selectable Multi-
Denomination Keypad is installed, this page will allow the operator to assign
the selected player denomination(s) to the four quadrants of the denomination
touch pad

[Buzz]

Look at this thread maybe it will help.     http://newlifegames.net/nlg/index.php?topic=12388.0

[turniphead]

Might need to pick pars for whichever denoms you want to use before trying to set up the touch pad. Good luck!!

[sbsgroup]

Thanks I will let you know how it goes.

[Buzz]

With out reading that whole thread ( I don't have time to )  As I remember the whole key to setting up 4 different denoms is first you have to set all 4 denom pay percentages.

[sbsgroup]

You were absolutely correct,  you have to set up the pay percentages before you can assign  the buttons.  Thanks for this info as I could not understand why I couldn't assign the buttons to the denoms.  Thanks the machine is up and running like a champ.