Welcome, Guest. Please login or register.
November 25, 2024, 09:05:15 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Convert Bonus Frenzy to accept Bills		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Convert Bonus Frenzy to accept Bills  (Read 10729 times)
BillieRubin
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 6
« on: August 03, 2012, 06:13:06 PM »
I should preface all this with the fact that I am a new slot owner.  I don't too much about the internals but am a computer geek and have experience with electronics.

I have a nice Bally S6000 4 reel Bonus Frenzy.  The game works perfectly, no problems at all with it.  Currently is is setup for free play with the Bally Free play kit like this:  http://rudysdeals.com/index.php?route=product/product&path=38&product_id=831

It has a coin comparitor, no coin hopper, no bill validator, no cashbox.  But it looks like all of the harnesses are there, but I cannot be sure.

I would like to convert the machine to accept ONLY bills (no coins) and be able to print out a ticket on cashout.  Basically a "bill in, ticket out" machine.  I expect that I would need a bill validator, cash box, ticket printer and I may need a ticket printer bracket (I do not see any way to connect a ticket printer to the case).

Any help or direction would be appreciated.

Thanks
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #1 on: August 04, 2012, 12:59:37 AM »
Quote from: BillieRubin on August 03, 2012, 06:13:06 PM
I should preface all this with the fact that I am a new slot owner.  I don't too much about the internals but am a computer geek and have experience with electronics.

I have a nice Bally S6000 4 reel Bonus Frenzy.  The game works perfectly, no problems at all with it.  Currently is is setup for free play with the Bally Free play kit like this:  http://rudysdeals.com/index.php?route=product/product&path=38&product_id=831

It has a coin comparitor, no coin hopper, no bill validator, no cashbox.  But it looks like all of the harnesses are there, but I cannot be sure.

I would like to convert the machine to accept ONLY bills (no coins) and be able to print out a ticket on cashout.  Basically a "bill in, ticket out" machine.  I expect that I would need a bill validator, cash box, ticket printer and I may need a ticket printer bracket (I do not see any way to connect a ticket printer to the case).

Any help or direction would be appreciated.

Thanks


I see that nobody has jumped in to help you yet. I will get you started...First to make this real easy Cry Laughing or at least a little bit easier, take some good pictures of the machine. Inside and out. So we can see what brackets, componets, harnesses and ect are missing or are there. The more the better. you can only attach 2 pictures per post, but you can post as many times as needed. We can accomplish what you want to do fairly easily. Parts is going to be the issue. We need to see what you need and what vendors have them for your price. I do not have all that you may require, but I do have connections with vendors here that do supply quality parts at the right price I can guide you to. Lets start with as many detailed pictures as you can of the area where the bill validator, cash can housing, ticket printer and general overall of the machine to get us started.

And Welcome to the board !! applause
Logged
BillieRubin
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 6
« Reply #2 on: August 05, 2012, 10:22:44 AM »
Thanks for the help!

Here are some pics...

* Slot1.JPG (383.82 KB, 1296x968 - viewed 413 times.)

* Slot2.JPG (526.48 KB, 1296x968 - viewed 429 times.)
Logged
BillieRubin
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 6
« Reply #3 on: August 05, 2012, 10:23:39 AM »
And some others...

* Slot3.JPG (612.13 KB, 1296x968 - viewed 421 times.)

* Slot4.JPG (504.52 KB, 1296x968 - viewed 422 times.)
Logged
BillieRubin
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 6
« Reply #4 on: August 05, 2012, 10:24:54 AM »
And one more...

* Slot5.JPG (441.09 KB, 968x1296 - viewed 422 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #5 on: August 05, 2012, 11:30:42 AM »
OK, actually I can help you with this.

You need:
A complete Printer with power supply and bracket
A WBA bill transport with head
Cash can
Ram Clear chips to enable the printer and bill accepter

instructions for the ram clear and option sheet for set-up

I will send a PM with price
« Last Edit: August 05, 2012, 11:50:54 AM by coorslight115 » Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #6 on: October 20, 2012, 07:44:35 PM »
I am a new member and just acquired a Bonus Frenzy slot with a free play mod but without the ticket printer and bill validator.  My machine is identical to one pictured above.  I have already purchased a printer and bill validator with transport and cash box.  Any guidiance on how to correctly install these would be appreciated.  My machine has the leave in mains in it.  I am not new to electroinics and computers but just a rookie when it comes to slots.  Thanks Ted
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #7 on: October 21, 2012, 11:02:55 PM »
Quote from: tjlee on October 20, 2012, 07:44:35 PM
I am a new member and just acquired a Bonus Frenzy slot with a free play mod but without the ticket printer and bill validator.  My machine is identical to one pictured above.  I have already purchased a printer and bill validator with transport and cash box.  Any guidiance on how to correctly install these would be appreciated.  My machine has the leave in mains in it.  I am not new to electroinics and computers but just a rookie when it comes to slots.  Thanks Ted

OK, Again..nobody want to touch this one..

1st problem is I have not seen a set of Leave in mains that support the printer past the first ticket being printed without being hooked up to a TITO system. So you will need to get a regular set of mains and a set of clear chips. Next I need to know what Bill acceptor you have. WBA / MEI / Mars ect and what software version it has if label is on it. And did your printer come with the brackets, power supply and harness.

Pictures of everything again would help with these answers...And Yes we can get you going.
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #8 on: October 21, 2012, 11:36:55 PM »
The printer is a Future Logic Ticket Printer Model PSA-66ST from Rudys.  The bill validator I have not received yet but was told it was Mars.  I will try and post pictures as soon as get this all together.  I guess step one is to buy a set of mains and clear chips.  I need some guidiance as to where these may be purchased.   Scratch Head  Thanks for your help on this  Ted
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #9 on: October 21, 2012, 11:54:13 PM »
Here are several pictures of the slot.

* Bally1.JPG (140.73 KB, 868x651 - viewed 411 times.)

* Bally2.JPG (133.95 KB, 868x651 - viewed 365 times.)
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #10 on: October 21, 2012, 11:56:47 PM »
Two more pictures

* Bally3.JPG (131.64 KB, 868x651 - viewed 375 times.)

* Bally4.JPG (152.38 KB, 651x868 - viewed 390 times.)
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #11 on: October 22, 2012, 12:13:58 AM »
Last Pictures

* Bally5.JPG (208.7 KB, 868x651 - viewed 430 times.)

* Bally6.JPG (187.65 KB, 868x651 - viewed 431 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #12 on: October 22, 2012, 12:22:27 AM »
You are missing a lot more parts. I will need to see the parts you receive to answer what you will need. As far as the mains I can supply them when the time comes for that.
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #13 on: October 22, 2012, 12:25:45 AM »
OK  Sounds good.  I will keep you posted as I get parts for this. Thanks again for all the help  Ted
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #14 on: October 22, 2012, 12:45:47 AM »
Quote from: tjlee on October 22, 2012, 12:25:45 AM
OK  Sounds good.  I will keep you posted as I get parts for this. Thanks again for all the help  Ted

Will wait for the pics.
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #15 on: October 25, 2012, 09:46:33 PM »
OK  Received my printer today for my S6000.  Here are several pictures of it.  I am not sure where the cables are attached to the slot.  I think the black plug goes to the spare RS232 port on the backplane but I am not sure of the others.  Any help would be appreciated.

* Printer1.JPG (135.53 KB, 868x651 - viewed 349 times.)

* Printer2.JPG (155.41 KB, 868x651 - viewed 384 times.)
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #16 on: October 25, 2012, 09:47:49 PM »
Here are several more pics.  Second one shows the switch settings.

* Printer3.JPG (55.52 KB, 493x370 - viewed 391 times.)

* Printer4.JPG (60.49 KB, 581x326 - viewed 380 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #17 on: October 25, 2012, 10:17:14 PM »
Here is where that one goes, the one with x is not used

* capture_02.jpg (726.47 KB, 1280x800 - viewed 378 times.)

* capture_01.jpg (712.94 KB, 1280x800 - viewed 390 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #18 on: October 25, 2012, 10:24:39 PM »
This is the red circled one, it plugs into the power pack wire.

* capture_03.jpg (436.9 KB, 1280x800 - viewed 418 times.)

* capture_04.jpg (675.12 KB, 1280x800 - viewed 350 times.)
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #19 on: October 26, 2012, 03:51:03 AM »
OK  I will give it a try tommorrow. Thanks for the help so far.  My bill validator should be here tomorrow or Monday. 
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #20 on: October 26, 2012, 12:47:28 PM »
Printer worked great on 1st ticket and now it will only do a handpay instead of printing.  You are right about the leave in mains.  Will wait to tackle that problem after the bill validator gets here.  Thanks again Ted
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #21 on: October 26, 2012, 03:41:05 PM »
Quote from: tjlee on October 26, 2012, 12:47:28 PM
Printer worked great on 1st ticket and now it will only do a handpay instead of printing.  You are right about the leave in mains.  Will wait to tackle that problem after the bill validator gets here.  Thanks again Ted
That's what happens with leave in mains. Go to 2003 mains.
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #22 on: October 26, 2012, 05:11:28 PM »
The leave in mains came with the slot when I bought it.  I have located a set of 2003's and clear chips for it.  That should correct the problem.  I really like to ticket printer but wished you could put it back in the bill validator.  I guess it takes a TITO system to do this.  I have four slot machines and maybe that will be a project for the future.  Never worked on a Bally before and I am learning fast thanks for all the help from NLG site.   applause
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #23 on: October 26, 2012, 05:17:17 PM »
If you run a TITO setup the leave in mains work.
If you do not have TITO you have to run the 2003's
Logged
tjlee
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 76
Offline Offline

Gender: Male
Posts: 128
« Reply #24 on: October 26, 2012, 05:18:25 PM »
I will make a note of it.  Thanks
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.11 seconds with 20 queries.