Welcome, Guest. Please login or register.
September 28, 2024, 10:12:26 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  S-Plus no display or power to reels (not just the connector)		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S-Plus no display or power to reels (not just the connector)  (Read 2180 times)
kevlar442
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 13
« on: August 21, 2012, 07:08:54 PM »
Hi folks, I'm hoping someone might be able to point me in the right direction.  I have an S-Plus that had the lamp power on the "Bet Max" plugged into the button switch for awhile.  It blew the 8A fuse, and cooked the connector on the backplane thats usually a little brown and the backplane itself.  I replaced the fried connector, backplane, and fuse; but I still have no display or power to the reels.  I also replaced the CPU board in case it was damaged in the process, but it didn't change the symptoms.  My power supply is fine, and giving proper output.  I don't see any melty wires, so I'm wondering what I might be missing.  Any thoughts?
Logged
rjpohl
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 103
Offline Offline

Gender: Male
Posts: 726



WWW
« Reply #1 on: August 21, 2012, 07:14:50 PM »
The connector on the mother board that comes the side of the power supply is probably the problem.  With power on and door open you  can move the connector up and down, you probably see the reels lock up and the display lights will come on.  These is a very common problem with S+ machines.  If you want you can cut the 2 green ground wires near the mother board and then ground them to a screw in the base of the machine.

Bob
Logged

http://samronslots.com/
kevlar442
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 13
« Reply #2 on: August 21, 2012, 07:49:22 PM »
Yep, the new pins in the new connector weren't making contact.  Thanks!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.073 seconds with 18 queries.