Newbie needs help coin hopper/printer

[o1cbc]

Hi everyone I just purchased my first S2000 vision Double diamond run slot machine. The machine has both the coin hopper and comparator installed and also the ticket printer. After doing some research I found that in order to activate them i need to get a Key Chip. I was wondering if anyone could advise me on what key chip(s) i would need to make this happen. The machine is currently setup for a hand payout.  I looked on the board and these are the chips that are currently on the board Stepper Base SB000931, Stepper GME1 SG000621 1 of 2, Stepper GME2 SG000621 2of2, Version Chip VS011NX5 and the Model # of the board is 1952-0.  Any help would be greatly appreciated so i can get them up and running.  Also what clear chip I would need so I can have it on hand just in case.

Thanks
Brad
 

[gposing]

I would suggest getting a 97 clear chip and the 45 set chip.  Here is the 45 chip at Rudy's.  http://rudysdeals.com/index.php?route=product/product&path=37&product_id=1563

You have the NX5 chip in there, if you add the button all the way to the right you can also make the slot multi-denomination.

[o1cbc]

I appreciate the response and will order them today. Putting the multi-denomination button may be a great addition didn't know about that.  

Thanks
Brad  

[gposing]

I think i have the docs at home with the settings just let me know if you do it.

[gposing]

You will need a jackpot reset key.  Here is the procedure to clear the system.  http://newlifegames.net/nlg/index.php?topic=571.msg3733#msg3733

[o1cbc]

OK I have the jackpot reset key and the chips are ordered.  Should I or do I have to do a Clear before using the key chip to change the settings or am I ok without clearing it.  Thanks for the links makes it a lot easier lol.  If you come across the doc. for the domination I would appreciate it. I'm guessing that there is a wire harness for the button already there but ill check when I get home. 

Thanks
Brad