Welcome, Guest. Please login or register.
October 31, 2024, 09:06:23 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  E-1000 Shows "2" "0" or "C" ??		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: E-1000 Shows "2" "0" or "C" ??  (Read 4452 times)
tucsondirect
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 30
« on: October 23, 2012, 12:42:34 AM »
what does this mean, the "2" is when i power machine on with door "open."
"c" when i remove the reel assembly and power the machine on with door closed.
and "0" when reel is in and door  is closed???

i am 100% confused and need help!

also sometimes the "0" is located at =[0][ ][ ][ ][ ][ ]= and sometimes =[ ][ ][ ][ ][0][ ]=
the "C" is usually at = [ ][ ][ ][ ][C][ ] =
and the "2" is always at  =[ ][ ][ ][ ][2][ ]=
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #1 on: October 23, 2012, 08:04:17 PM »
Have you tried reseating the RAM board thats on the MPU?
Is the battery on the RAM in good shape?

Checked all the fuses? And inspect all the fuse holders for deteriation?
Check the power supply and the connections at the power supply?

May have to reseat all the IC's on the MPU and RAM?
May have to clean all the connectors on all  the boards?

These are things that helped me in the past with my E1000 & E2000.
Logged
tucsondirect
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 30
« Reply #2 on: October 23, 2012, 08:11:57 PM »
Quote from: tkrozleski on October 23, 2012, 08:04:17 PM
Have you tried reseating the RAM board thats on the MPU?
Is the battery on the RAM in good shape?

Checked all the fuses? And inspect all the fuse holders for deteriation?
Check the power supply and the connections at the power supply?

May have to reseat all the IC's on the MPU and RAM?
May have to clean all the connectors on all  the boards?

These are things that helped me in the past with my E1000 & E2000.


I think the battery is good its the orig. i get 3.6-3.7 with the multimeter.

Not sure how to reset the ram board, i have removed it and reseated it, shorted the battery and such.

i did re-seat  he sip socket chips (broke a pin on 1 of them soldered extension to it to repair) however this made no difference?
All fuses check good with continuity test. and load test in a working appliance.
power supply appears to be good will check connections.

I thought that maybe i put the ram board in backwards but closer inspection shows pin 6 being omitted to prevent silly errors like that !
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #3 on: October 23, 2012, 08:20:34 PM »
 Other great members here with much much more knowledge may jump in here soon with their advice.
Logged
tucsondirect
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 30
« Reply #4 on: October 23, 2012, 08:57:08 PM »
Quote from: tkrozleski on October 23, 2012, 08:20:34 PM
Other great members here with much much more knowledge may jump in here soon with their advice.


Just a side note i checked the connection from the ic chips to the solder points on the back and they all check good, i can post pics if it would help
Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #5 on: October 23, 2012, 09:20:07 PM »
Check the pins on the RAM board, they break all the time.

Remove the RAM board and hold it to the light. Then look inside each socket to see it each still has the tab that makes contact with the pin.
You probably have some missing.  Sherlock Smiley
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
tucsondirect
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 30
« Reply #6 on: October 23, 2012, 09:26:35 PM »
Quote from: Neonkiss on October 23, 2012, 09:20:07 PM
Check the pins on the RAM board, they break all the time.

Remove the RAM board and hold it to the light. Then look inside each socket to see it each still has the tab that makes contact with the pin.
You probably have some missing.  Sherlock Smiley
Thanks i will check for the pads right now

ETA

It appears all the "Pins" are in there ..

This machine is bugging the crap out of me
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #7 on: October 24, 2012, 09:29:37 PM »
"2" is RAM failure

Have you removed and inspected  all the IC's for oxidation on the pins  and reinstalled them ?
Logged
tucsondirect
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 30
« Reply #8 on: October 24, 2012, 11:26:29 PM »
Quote from: tkrozleski on October 24, 2012, 09:29:37 PM
"2" is RAM failure

Have you removed and inspected  all the IC's for oxidation on the pins  and reinstalled them ?


I forgot to mention when i remove the ramboard, and tell the switch that the door is open i get the "2" but only with door open,
Logged
midas touch
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 83
« Reply #9 on: November 04, 2012, 07:33:16 PM »
With the ram board installed check continuity from a point before ram board that goes thru the ram connector to a point on the other sideof connector..Ill bet u find there is a connector thats not quite right.......
Logged
I have "THE MIDAS TOUCH". Every thing I touch turns into a muffler....
tucsondirect
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 30
« Reply #10 on: November 04, 2012, 08:53:15 PM »
Quote from: midas touch on November 04, 2012, 07:33:16 PM
With the ram board installed check continuity from a point before ram board that goes thru the ram connector to a point on the other sideof connector..Ill bet u find there is a connector thats not quite right.......
If thats the problem i will be a very happy person! thanks for the tip i will check it out and let you know
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.115 seconds with 20 queries.