Welcome, Guest. Please login or register.
November 22, 2024, 12:17:20 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Can't perform a Safe Ram clear after replacing low battery?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Can't perform a Safe Ram clear after replacing low battery?  (Read 9748 times)
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« on: October 24, 2012, 07:41:37 PM »
I had a Bally 6000 In The Money machine that had a low battery after having a 88FF. I replaced the old battery and it was indeed dead with a remote battery holder and (3) 1.2 V rechargeable batteries and soldered ti to the board. I installed my daferam clear chips at U28 and U43 and when I powered it up and held down the psuedo and test buttons, I got a 83F code and it would not clear. Did I miss a step on this somewhere?


Thanks,

David
Logged
Oscar Pompa
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 150
« Reply #1 on: October 24, 2012, 08:19:52 PM »
check if your Battery is Enable:
The Lithium battery may be disabled for shipping or storage. To enable the battery, locate jumper JW20
left of the battery and place the jumper across the two pins.
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #2 on: October 24, 2012, 08:24:30 PM »
the jumper is on the 2 pins of JW20, is there a way to check the battery voltage on the board other than just the two leads on the battery holder?
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #3 on: October 24, 2012, 09:00:43 PM »
Quote from: BR549 Auto Sales on October 24, 2012, 07:41:37 PM
I had a Bally 6000 In The Money machine that had a low battery after having a 88FF. I replaced the old battery and it was indeed dead with a remote battery holder and (3) 1.2 V rechargeable batteries and soldered ti to the board. I installed my daferam clear chips at U28 and U43 and when I powered it up and held down the psuedo and test buttons, I got a 83F code and it would not clear. Did I miss a step on this somewhere?


Thanks,

David

When you installed the chips and held the buttons and turned on machine, did do the clear, display the CL C with buttons flashing then display the 83F, or did it immediatly go to the 83F when turning on?
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #4 on: October 24, 2012, 09:22:39 PM »
Immediate after turning the game on with both buttons pressed.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #5 on: October 24, 2012, 09:32:53 PM »
Push on the two buttons hard enough to make your fingers hurt, then turn on the power.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #6 on: October 24, 2012, 09:58:20 PM »
http://newlifegames.net/nlg/index.php?topic=5315.0 see reply #1
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #7 on: October 24, 2012, 10:28:30 PM »
Quote from: Buzz on October 24, 2012, 09:32:53 PM
Push on the two buttons hard enough to make your fingers hurt, then turn on the power.

This is very true...but the 83F should not show up

Do your mains support the ticket printer?
« Last Edit: October 24, 2012, 10:42:12 PM by coorslight115 » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #8 on: October 24, 2012, 11:13:47 PM »
Quote from: coorslight115 on October 24, 2012, 10:28:30 PM
Quote from: Buzz on October 24, 2012, 09:32:53 PM
Push on the two buttons hard enough to make your fingers hurt, then turn on the power.

This is very true...but the 83F should not show up



I don't know, I don't do Bally's Haven't bought a Bally in 4 years. and the only (3) 6000 I ever had are stored back in my JUNK trailer.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #9 on: October 25, 2012, 12:20:15 AM »
David,

83F is an issue with your safe ram chips. If you have another pair I would try them. I've had them go bad for no reason.
Logged
If it ain't broke....Stop trying to fix it.
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #10 on: October 25, 2012, 12:28:53 AM »
David,

One more thing to think about. Do your 3 1.2V batteries give you the 600 ma you need.
Logged
If it ain't broke....Stop trying to fix it.
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #11 on: October 25, 2012, 12:31:14 AM »
not exactly sure, can you tell me how to check?

Thanks,

David
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #12 on: October 25, 2012, 12:37:44 AM »
If you have a vtvm (volt meter) that has a milliamp setting, set to a higher scale then 600 ma and just touch the probes to the ends of the batts and see if the needle bounces up past 600. I'm old school, don't like digital, but they will work for this.
Logged
If it ain't broke....Stop trying to fix it.
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #13 on: October 25, 2012, 12:42:10 AM »
Will be listed on the battery specs. volts @ so many mA. But fresh batteries should still get the job done when new. I thing we have a version issue between the mains and clears as David told me they do not support the printer. There are many versions of mains and some require the casino back end server to support the printer and there are clears that match. David I will send you a matching set of mains and clears to try and see if that cures your issue.
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #14 on: October 25, 2012, 12:46:04 AM »
Thanks Coors, you're always a great help.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #15 on: October 25, 2012, 01:09:46 AM »
" (3) 1.2 V rechargeable batteries "

Are you sure they are 1.2 and not 1.5 ??
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #16 on: October 25, 2012, 01:12:40 AM »
they are 1.2 not 1.5 for sure
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #17 on: October 25, 2012, 01:13:40 AM »
Quote from: Buzz on October 25, 2012, 01:09:46 AM
" (3) 1.2 V rechargeable batteries "

Are you sure they are 1.2 and not 1.5 ??

Buzz, I hope he listened to me when he first asked about the battery pack and rechargable batteries. I told him that MOST rechargables are 1.2 volts but to make sure, and I think he did.but very god point again as over voltage will cause issues as well.



He typed faster than this old man.....
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #18 on: October 25, 2012, 01:17:16 AM »
I listened to ya Coors! lol
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #19 on: October 25, 2012, 01:58:49 AM »
OK matching set of mains and clears are in the morning mail...let us know how you make out !!
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #20 on: October 25, 2012, 02:16:20 AM »
will do
Logged
leapyearguy
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 226
« Reply #21 on: October 25, 2012, 04:59:33 AM »
is this where we go to talk about how much easier it is to clear a bally than an IGT??/   stir the pot / get cooking stir the pot / get cooking stir the pot / get cooking
Logged
20 bucks for simple repairs, 30 if you watch, and 50 if you open your mouth.
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #22 on: October 31, 2012, 01:34:31 PM »
Just performed a safe ram clear and installed the new main that Coors sent to me. I powered the game up, set date and time but when I hit the change button to confirm changes and exit, I got a 91FF. What dies that mean and how can I solve it?

Thanks,

David
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #23 on: October 31, 2012, 01:39:52 PM »
91 is a comm error. there must be a progressive setup in the machine
Logged
If it ain't broke....Stop trying to fix it.
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #24 on: October 31, 2012, 01:44:16 PM »
There is not a progressive set up on this machine, is there something else I can check, possibly the dip switches?
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.09 seconds with 20 queries.