Can't perform a Safe Ram clear after replacing low battery?

[lindam1]

Try this    http://slot-tech.com/interesting_stuff/bally/Bally%20S6000/ Start with #2 in the list. It's not the best but it has dip switch info. also check all the settings in "11d" menu. 02 should be "0000" if no progressive .

[BR549 Auto Sales]

I can't get to 11d because when I try to confirm my time and date settings by pressing the change button, it goes to 91FF

[lindam1]

I must be loosing my touch. I didn't ask the most important questions.

1. what machine is this?
2. did it ever work for you?
3. can you post a pic?

My reason is that 91FF is not a 6000 error. 91 with other numbers and or letters is but not FF.

[BR549 Auto Sales]

I don't know if or why this may have had something to do with the problem but the door switch/optic was not working correctly. Basically it would not show that the door was open until I pulled the plug from the door optic on the cabinet side. I was able to get it to save the time and date and get into the set up at the 11d point.

Thanks to Coors for sending me the new mains and safe ram clear chips, if i knew how to send Karma I would. Many thanks to all the other forum members that educate me on these machines as well.