is there hope? IGT> Cmos Data > what chips to buy?

[Geena]

    I have a drop in bar model IGT 5 game stainless steel top machine with a bill acceptor, it had 5 games to play,,,I disconnected the battery and when i re soldered it all my stats where jumbled with ! ? /& # mixed with numbers now the screen shows Door open / call attendant/ Cmos Data  when i turn it on 

 here is a pic of the board of my slot machinewhat kind of chips will i need to buy? and which one of the chips would i take out to clear the c-moa data? and reset the game I honestly know very littel about the video games i mostly tinker with the mechanical and Electra mechanical slot machines ,,,

i can still get to a screen that shows a multi game 5 game option with stat options below but that's it any and all help is appreciated

Thanks,



Sincerely


Geena

ps: i have try ed a bunch of the test procedures to reset ,but i think i need reset chips

Update::

I have ordered a different mother board on eBay and a set of PE+ clear and set chips
I guess i may as well put new battery in as well

 I really  don't know witch chip to take out on my board to put the clear and set chip into    ma be the dude will send in strutions with them from eBay

anyway hope to be playing my game soon again,

i am hoping the new board might help with the door open message, i honestly have try ed all i know to get it to go away and it still "Haunts me

i cant seem to find the lower door optics for sale anywhere how would i bypass them temp to test and reset game?

thanks to any and all that might have suggestion's

Geena 
                                                                                      UPDATE !!!!!!!!!!!!!!!!!!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OK
i have my drop in poker up and working

this is what i did

i tryed all the test procedures to remove the error coads but no go   , as my door open error i could not get gown i tryed by-passing the top optic and the bottom duel eye one unit optic but the bottome door one dident seem to respond/ work and i dident / could not find a nother set to replace mine

i looked for weeks on how to bypass ,, but no go

i also had jumbeled stats  so i thought i needed to clear ram and re set with chips,, >I DIDENT NEED TO<

long story short, i had had enuff and said to heck with it and i took the top door side optic and twisted the 2 wires together,,
 then the the statinary top door optic and twisted the 2 wires together,

then proceded to find a peace of tinfoil and taped it in front of the lower door duel optic and the door open warning vanished from the screen ! Yay!!!,

OK

then i carefully went Thur the test proceders again

turned power off,,  then back on

pressed small white test butten herd ding after 5-7 seconds terned reset key once and boom my game was back and working plays all 5 games

cycle's properly bill acceptor works good !!!!

================================

now i must find out why my monitor has a all pink wash on it and i will be 100 %

any sugestions on a used monitor location ,, or how to fix mine are apreciated   ;-))

thanks

[coorslight115]

I have what you need,  PM sent

[nikstar]

In order to clear the cmos data error, open the door and press the test button for a few seconds until you hear a beep sound. Then close the door and turn the jackpot key once. This procedure will put your machine to play but then you need a key chip to re-enable your bill acceptor and to set the denomination.

[Geena]

TY a bunch  hopfully i can find the door open problem and try the test again, i think i am going to order the pe plus chips just in case